KALLEY SERVICE MANUAL

K-LED24HDT2

1. Caution………………………………………………………………………… 2. specification…………………………………………………………………… 3. Alignment Procedure………………………………………………………… 4.Block diagram………………………………………………………………… 5.Scheme Diagram …………………………………………………………… 6. Troubleshooting………………………………………………………………

This m anual i s t he l atest at t he t ime of pr intiandg, doe s not include the modification which may be made after the printing, by the constant improvement of product 1. CAUTION

CA UTION: Use of controls, adjustments or procedures other than those specified herein may result in hazardous radiation exposure.

CA UT ION : T O RE DU CE TH E RIS K OF CA U T ION EL ECTR ICA L SHOCK, DO NOT RE MOVE RISK OF ELECTRIC COVE R (OR BACK). NO USER SERVIC EABLE SHOCK DO NOT OPEN. PAR TS INS IDE . RE FE R SE R VIC ING T O QUALIFIE D SERVIC E PERSONNEL.

The lighting flash with arrowhead symbol, with an equilateral triangle is intended to alert the user to the presence of uninsulated dangerous voltage within the products enclosure that may be of sufficient magnitude to constitute a risk of electric shock to the person.

The exclamation point within an equilateral triangle is intended to alert the user to the presence of important operating and maintenance (servicing) instructions in the literature accompanying the appliance.

WARNING: TO REDUCE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE THIS APPLIANCE TO RAIN OR MOISTURE.

2 2 IMPORTANT SAFETY INSTRUCTIONS

CAUTION: Read all of these instructions. Sa ve these instructions for later use . Follo w all W arnings and Instructions marked on the audio equipment. 1. Read Instructions-All the safety and operating instructionsshouldbe read before the productis operated. 2. Retain Instructions- The safety and operating instructions should be retained for future reference. 3. Heed Warnings- All warnings on the product and in the operating instructions should be adhered to. 4. Follow Instructions- All operating and use instructions should be followed.

FOR YOUR PERSONAL SAFETY

1. When the power cord or plug is damaged or frayed, unplug this television set from the wall outlet and refer servicing to qualified service personnel. 2. Do not overload wall outlets and extension cords as this can result in fire or electric shock.

3. Do not allow anything to rest on or roll over the power cord, and do not place the TV where power cord is subject to traffic or abuse. This may result in a shock or fire hazard.

4. Do not attempt to service this television set yourself as opening or removing covers may expose you to dangerous voltage or other hazards. Refer all servicing to qualified service personnel.

5. Never push objects of any kind into this television set through cabinet slots as they may touch dangerous voltage points or short out parts that could result in a fire or electric shock. Never spill liquid of any kind on the television set.

6. If the television set has been dropped or the cabinet has been damaged, unplug this television set from the wall outlet and refer servicing to qualified service personnel.

7. If liquid has been spilled into the television set, unplug this television set from the wall outlet and refer servicing to qualified service personnel.

8. Do not subject your television set to impact of any kind. Be particularly careful not to damage the picture tube surface.

9. Unplug this television set from the wall outlet before cleaning. Do not use liquid cleaners or aerosol cleaners. Use a damp cloth for cleaning.

10.1. Do not place this television set on an unstable cart, stand, or table. The television set may fall, causing serious injury to a child or an adult, and serious damage to the appliance. Use only with a cart or stand recommended by the manufacturer, or sold with the television set. Wall or shelf mounting should follow the manufacturer s instructions, and should use a mounting kit approved by the manufacturer.

10.2. An appliance and cart combination should be moved with care. Quick stops, excessive force, and uneven surfaces may cause the appliance and cart combination to overturn.

3 3 PROTECTION AND LOCATION OF YOUR SET

11. Do not use this television set near water ... for example, near a bathtub, washbowl, kitchen sink, or laundry tub, in a wet basement, or near a swimming pool, etc. Never expose the set to rain or water. If the set has been exposed to rain or water, unplug the set from the wall outlet and refer servicing to qualified service personnel. 12. Choose a place where light (artificial or sunlight) does not shine directly on the screen.

13. Avoid dusty places, since piling up of dust inside TV chassis may cause failure of the set when high humidity persists.

14. The set has slots, or openings in the cabinet for ventilation purposes, to provide reliable operation of the receiver, to protect it from overheating. These openings must not be blocked or covered. Never cover the slots or openings with cloth or other material. Never block the bottom ventilation slots of the set by placing it on a bed, sofa, rug, etc. Never place the set near or over a radiator or heat register. Never place the set in a built-in enclosure, unless proper ventilation is provided. PROTECTION AND LOCATION OF YOUR SET

15.1. If an outside antenna is connected to the television set, be sure the antenna system is grounded so as to provide some protection against voltage surges and built up static charges, Section 810 of the National Electrical Code, NFPA No. 70-1975, provides information with respect to proper grounding of the mast and supporting structure, grounding of the lead-in wire to an antenna discharge unit, size of grounding conductors, location of antenna discharge unit, connection to grounding electrode, and requirements for the grounding electrode.

EXAMPLE OF ANTENNA GROUNDING AS PER NATIONAL ELECTRICAL CODE INSTR UCTIONS

EXAMPLE OF ANTENNA GROUNDING AS PER NATIONAL ELECTRICAL CODE

ANTENNA LEAD- IN WIRE

GROUND CLAMP

ANTENNA DISCHARGE UNIT (NEC SECTION 810-20)

GROUNDING CONDUCTORS ELECTRIC SERVICE (NEC SECTION810-21) EQUIPMENT

GROUND CLAMPS

POWER SERVICE GROUNDING NEC-NATIONAL ELECTRICAL CODE ELECTRODE SYSTEM (NEC ART 250. PART H)

15.2. Note to CATV system installer : (Only for the television set with CATV reception) This reminder is provided to call the CATV system installer s attention to Ar ticle 820-40 of the NEC that provides guidelines for proper grounding and, in particular, specifies that the cable ground shall be connected to the grounding system of the building, as close to the point of cable entry as practical.

16. An outside antenna system should not be located in the vicinity of overhead power lines or other electric lights or power circuits, or where it can fall into such power lines or circuits. When installing an outside antenna system, extreme care should be taken to keep from touching such power lines or circuits as contact with them might be fatal. 17. For added protection for this television set during a lightning storm, or when it is left unattended and unused for long periods of time, unplug it from the wall outlet and disconnect the antenna. This will prevent damage due to lightning and power-line surges.

4 4 OPERATION OF YOUR SET 18. This television set should be operated only from the type of power source indicated on the marking label.If you are not sure of the type of power supply at your home, consult your television dealer or local power company. For television sets designed to operate from battery power, refer to the operating instructions. 19. If the television set does not operate normally by following the operating instructions, unplug this television set from the wall outlet and refer servicing to qualified service personnel. Adjust only those controls that are covered in the operating instructions as improper adjustment of other controls may result in damage and will often require extensive work by a qualified technician to restore the television set to normal operation. 20. When going on a holiday : If your television set is to remain unused for a period of time, for instance, when you go on a holiday, turn the television set off and unplug the television set from the wall outlet. IF THE SET DOES NOT OPERATE PROPERLY 21. If you are unable to restore normal operation by following the detailedprocedurein your operating instructions, do not attempt any further adjustment. Unplug the set and call your dealer or service technician. 22. Whenever the television set is damaged or fails, or a distinct change in performance indicates a need for service, unplug the set and have it checked by a professional service technician. 23. It is normal for some TV sets to make occasional snapping or popping sounds, particularly when being turned on or off. If the snapping or popping is continuous or frequent, unplug the set and consult your dealer or service technician. FOR SERVICE AND MODIFICATION 24. Do not use attachments not recommendedby the television set manufacturer as they may cause hazards. 25. When replacement parts are required, be sure the service technician has used replacement parts specified by the manufacturer that have the same characteristics as the original part. Unauthorized substitutions may result in fire, electric shock, or other hazards. 26. Upon completion of any ser vice or repairs to the television set, ask the ser vice technician to perform routine safety checks to determine that the television is in safe operating condition.

5 5 PRODUCT SPECIFICATION RELEASE

Model: L24D2710/MS306GPA-LA/CM1GTA Version:1.0 Issued On: 2015-03-09

Basic Information Media Format Product Type LCD TV Music MP3 Chassis MS306GPA Picture JPEG、BMP、PNG OSD Language English/Portuguese/Spanish H.264、MPEG4、MPEG2 NTSC-M,PAL M/N TV System DVB-T2 AV System PAL、NTSC File TXT Channels(Analog) Antenna:2~69;CATV:1~125 DTV Channels(Digital) Antenna:14~69 Signal Format Capability

Power Supply AC 110V-240V 50/60Hz Format YPBPR:up to Power Consumption(TV On) 30W DVI Video Format Up to XGA for HDMI-PC Power Consumption(Standby) ≤0.5W HDMI Video Format up to 1080P Certification CB PC Compatibility Up to SXGA Basic Function Panel Specification EPG Yes(at DTV) Backlight Unit LED Subtitle --- Panel supplier CMO(V236BJ1-LE2) Parental Control Yes(at DTV) Aspect Ratio 16:9 Lock Yes Panel Size (inch) 23.6" V-Chip --- Display Resolution 1366*768 CCD (Closed Caption) Yes Brightness (cd/m2)(typ.) 220 Sleep Timer Yes Contrast Ratio 3000:1 --- Response Time (G to G) 8.5ms Nicam --- Viewing Angle (H/V) 178°/178° MTS Yes Life Time(Typ.) >30,000hrs Screen Saver Yes Color 16.7M(8bit) System Update Yes Refresh Rate 60Hz Hotel Mode Optional(In factory mode) Terminals Special Function Side Natura Light Technology --- REC Yes(at DTV)

GINGA --- Analog / Digital Signal Receiver Yes

MHL --- Game Yes Startup Setting --- Card Reader --- On/Off Timers Yes Picture DCC(Dynamic Contrast Control) --- Backlight Adjustable Yes (0~100) Color Temperature Medium/Warm/Cool Picture Mode Standard/Dynamic/Mild/User Picture Size Auto/4:3/16:9 /Zoom1/Zoom2/Panorama DLTI Yes DCTI Yes Comb Filter 3D Dynamic Noise Reduction Yes Adaptive Deinterlacing 3D Motion Compensation Yes Down Dynamic Skin Correction Yes Black Stretch Yes Blue Stretch Yes Sound Speakers Integrated speakers (Bottom side) Audio Power Output(THD=7%) 2×5W Smart Volume Yes(ON/OFF) Smart Audio Movie/Sports/Standard/Music/User Sound Control Volume, Balance,5 Band EQ Yes Sound Scene --- DD ( ) Yes Mechanical ID Picture

Unit: mm 54.8 18

18

24.5

147 559.2

337.4 379

346.1

Mechanical Key Specification Remote ID Picture

Carton Dimensions LxWxH(mm) 650*109*423 Container Loading---20 feet(pcs) 995 Container Loading---40 feet(pcs) 2100 Container Loading--40 feet High(pcs) 2394 Net Weight With Stand(Kg) 3.7 Net Weight Without Stand(Kg) 3.4 Gross Weight With Packaging(Kg) 4.8 VESA Mounting Dimensions LxH(mm) 100*100

Essential Accessories(Default) Optional Accessories

Operation Manual English(Default) Wall Mount WMB233

Remote Control and batteries RC200(TCL LOGO,with two batteries)

Base Stand Integrated Packaging

AC power cord 1 pc

Adapt Cable Wire For AV Or YPBPR ---

Design and specifications are subject to change without notice! Alignment Procedure

MS306 Series

MODEL:MS306/MS306B/MS306C/MS306D/MS306G

MS306P/MS306BP/MS306CP/MS306DP

VERSION:V3.0

PREPARED BY : Gongjunzan / Zhangjin DATE : 2014-1-24

APPROVED BY : DATE : History Description of major changes Release Changed by

Date

V1.0 2013-04-28

V2.0 Add usb update table on Page 10 2013-12-28 Zhangjin

Add USB port number set on Page 7 V3.0 2014-1-24 Gongjunzan

1.Overview

MS306 series chassis is designed for Asia Pacific/South America market. Both Full HD panel and HD panel can be compatible. The signal sources includeTV,AV,YPBPR/YCBCR,VGA,HDMI and USB. For YPBPR,HDMI source ,Format up to 1080p can be supported; USB support image, audio and video(up to H.264)playing; The whole process of alignment includes ADC calibration and White Balance adjustments.

2.Factory Menu

1、Methods of Entering

Method 1:Using the remote ,enter the “Picture” submenu in the OSD; choosing the “contrast” item and press the 9,7,3 and 5 in series, Factory Menu will appear in the left top of screen Method 2:Press RETURN button when FACTORY HOTKEY is enabled(ON). 2. General introduction FACTORY MENU

Default ITEMS Description Status Setting

Factory hotkey Switch 1-FAC HOTKEY OFF (OFF/ON).Should be OFF after factory OK alignment OFF:The set would enter standby mode after 15 minutes without input 2-WARM UP OFF signal; OK ON : Aging mode. Aging time will display on the left bottom of screen. 3-ADC ADC calibration(refer as follow) OK

4-WHITE BALANCE White Balance data adjustment(refer OK as follow) The balance data is set by PE before the mass production. Do not need adjust. 5-SHOP DO Reset the set after production OK alignment;(This operation will remove all unnecessary factory value; The factory hotkey will be turn off) 6-NVM reset DO System initialization. Restore all OK data except the White Balance and ADC data ;Only for R&D. 7-SET FAC CH DO Preset specific factory channels for OK specific factory. Press left and right button to select the factory, and then press OK to confirm. 8-POWER ON LAST ON: Always turns on TV when AC power OK on STB:Always goes to standby mode when AC power on LAST:Restore the status before the last AC power off 9-USB UPDATE USB update,(refer as follow) OK

10 This item only factory used, ReloadEFBItem…

Note: Below the factory menu, some model information are showed, including software version, Project Name, SIACP Version, and SW release time. ADC Submenu: ITEMS Default Description Status Setting Source RGB/YPbP Sources need calibration. RGB means PC and OK r YPbPr(HD) means YPbPr (HD) R-GAIN 4478 R-GAIN OK G-GAIN 4478 R-GAIN OK B-GAIN 4478 R-GAIN OK R-OFFSET 2048 B-OFFSET OK G-OFFSET 2048 B-OFFSET OK B-OFFSET 2048 B-OFFSET OK AUTO ADC WAIT/OK With appropriate pattern (mentioned below) OK inputted, press left or right key to start auto calibration. WHITE BALANCE Submenu ITEMS Default Description Statu Setting s Source Current Current Source( TV,AV1/AV2/YPbPr, HDMI need OK Source adjustment) COLOR TEMP NORMAL Medium/Cool/Ware OK R-GAIN 128 R-GAIN OK G-GAIN 128 G-GAIN OK B-GAIN 128 B-GAIN OK R-OFFSET 128 R-OFFSET OK G-OFFSET 128 G-OFFSET OK B-OFFSET 128 B-OFFSET OK WB INIT DO ONLY FOR TCL R&D OK

The first step is to adjust HDMI.

3.Design Menu

1、Methods of Entering:

Method 1:Using the remote, enter the “Picture” submenu in the OSD; choosing the “contrast” item and press the 1,9,5,and 0 in series ,Design Menu will appear in the left top of screen. Method 2: Press RETURN button when DESIGN HOTKEY is enabled (ON). 2、General introduction DESIGN MENU ITEMS Default Description Status Setting

1-DESIGN OFF ON/OFF OK HOTKEY 2-FACTORY ON/OFF OK MENU 3-SHOP INIT Default setting submenu after production OK alignment refer to **

4-OTHER Other set .Only for TCL R&D OK

5-SERVICE After service menu description OK MENU

6-PARAM Parameter setting submenu OK SETTING 7-HOTEL OK Hotel submenu(not adjust) MENU

SHOP INIT submenu ITEMS Default Description Status Setting Volume 30 0-100 adjustable OK PIC MODE STANDARD Standard/Bright/Mild/User OK SOUND MODE STEREO Movie/Sports/Standard/Music/User OK Channel ------OK Language English Up to 10 languages optional OK COLOR SYS AUTO AUTO、PAL、 SECAM OK SOUND SYS DK DK、BG、I、MN OK PRESET CH 1 0-199 adjustable OK COLOR TEMP NORMAL Medium/Cool/Ware OK

Other ITEMS Default Description Status Setting

VIF1 VIF adjust (not adjust) OK VIF2 VIF adjust (not adjust) OK

VIF3 VIF adjust (not adjust) OK

QMAP ADJUST >>> PQ debug (not adjust) OK SSC adjust SSC >>> OK

DBC ENABLE DBC adjust(not adjust) OK

BP (not adjust) OK

CP (not adjust) OK

DBC MODE (not adjust) OK

MIU DQS0 11 (not adjust)

MIU DQS1 10(not adjust)

PARAM SET SETTING ITEMS Default Description Status Setting Brightness Brightness curve. Exclusively used by R&D OK Curve Contrast Contrast curve. Exclusively used by R&D OK Curve Saturation Saturation curve. Exclusively used by R&D OK Curve Hue Curve Hue curve. Exclusively used by R&D OK Sharpness Sharpness curve. Exclusively used by R&D OK Curve Volume Volume curve. Exclusively used by R&D OK Curve BackLight BackLight curve. Exclusively used by R&D OK Curve OverScan Exclusively used by R&D

4、Service Menu

1、Methods of Entering

Using the remote, enter the “Picture” submenu in the OSD; choosing the “contrast” item and press the 9,7,0 and 5 in series, Service Menu will appear in the left top of screen

SERVICE MENU: ITEM Defau Description Status lt Setti ng SW NO Software Version OK DATE Date and time of software releasing OK Project Name Module name OK SIACP VERSION SIACP VERSION OK Chassis MS306 Chassis name OK PANEL NAME P/N of panel OK NG PROJECT ID >>> Select panel ID Number OK CONFIG >>> Project Select submenu USB UPDATE >>> USB UPDATE ok HOTEL ENABLE HOTEL MENU SWITCH NOT OFF USE ReloadEFBItem Do Only for factory adjust OK CONFIG submenu ITEM Default Description Status Setting Erase HDCP Key Do Only for R&D OK Reset HDCP Key Do Only for R&D OK UsbHdcpkey Do Only for R&D OK Update USBPortNumset 1 OK USB port number set (1 or 2)

5. Debugging

5.1. General Steps of debugging According to the requirement of the order, below steps are needed for appropriate setting. 1) Enter the Factory Menu, enable FAC HOTKEY. 2) Check Project ID and the version of software, release date displayed at the bottom of Factory Menu. 3) Enter Design Menu, choose SERVICE MENU->Project ID, choose corresponding Project ID number of the product (Refer to the “V6-PROJECT -ID0**”in the BOM list). 4) Return to Factory Menu, check the Product model. 5) Choose Factory Menu->NVM RESET and press the right button of the remote and wait until prompt OK appears. 6) Restart the set 7) According to the requirement of the order, Set the items of SHOP INIT and Hotel Menu etc. 8) After aging under normal temperature, calibrate ADC and adjust white balance. 9) Choose Factory Menu ->SHOP and press the button of remote to initialize the set.

Note: After step 9, Hotel Menu will be disabled by default. Therefore, if the order requires hotel function, it is necessary to enable hotel function by set Design MENU->Service Menu->HOTEL ENABLE to ON. 5.2. Equipments ·Color Analyzer CA-210. ·Video Pattern Generator Chroma2329. ·Color TV Pattern Generator PM5418/Fluke5418. ·VGA cable , AV(RCA) cable ,YPBPB (RCA) cable, HDMI cable etc.

5.3. ADC Calibration 5.3.1. Signal and generator PC: Chroma2329 Pattern 42,Timing 14(1024X768@60Hz 5 MOSAIC) YPBPR: Chroma2329 pattern 103, Timing 79(100% Color Bar,)

5.3.2. Steps of Calibration: 1). Access to the Factory menu->ADC 2). select RGB source and see the 5 MOSAIC appear on the screen 3). Select AUTO ADC , Press the right button on the your remote to calibrate the ADC automatically. 4). Select YPBPR source and Repeat step 5.3 . When the OK appears the calibration has been finished successfully.

5.4. White Balance adjustments (Manual) Before adjustment ,you must make sure the ADC status(only PC and YPbPr) is “success”and Color Analyzer has been calibrated .Only AV1,YPbPr,PC,HDMI1 need to be adjusted. HDMI1 should be the first. 5.4.1. Signal and generator The pattern of the signal should be used are White (Chroma2329 pattern 113) and Grey (pattern 114). The format of signal are respectively 720P for HDMI1 (Chroma2329 Timing 69),PAL (Chroma2329 Timing38) for AV1,1024X768@60Hz(Chroma2329 Timing14) for VGA and 720P(Chroma2329 Timing79) for YPbPr. 5.4.2. Steps of adjustment 1).Enter the factory menu-> White Balance, select source HDMI 1 and Normal Temperature. 2).Input grey signal in 720p format. 3).Change R-OFFSET and B-OFFSET to make sure the value of color coordination equal to (X=0.280 +/-0.015;Y=0.290 +/-0.015). 4).Input white signal in 720p format. 5). Change R-GAIN and B-GAIN to make sure the value of color coordination equal to (X=0.280 +/-0.015;Y=0.290 +/-0.015). 6).Repeat step 2—5 until both of the value of color coordination of white and grey equal to (X=0.280 +/-0.015;Y=0.290 +/-0.015).

For COOL and WARM color temperature, just repeat step 2—5.The color coordination we recommend for COOL and WARM color temperature is respectively(X=0.270 +/-0.015;Y=0.270 +/-0.015) and (X=0.300 +/-0.015;Y=0.305 +/-0.015). After the adjustment of HDMI1, you can switch to other source AV, PC and YPbPr and repeat step 1—6 to do the WB adjustment. Note: For some small size LED panel,the color coordination of specifications is not X=0.280/Y=0.290,and we recommend you adopt the values from panel specifications. 5.5. ADC Calibration and White Balance Adjustment (automatic) The process of adjusting ADC and White Balance automatically is out of the range of this file, Please refer to the relevant technical file of HuiZhou factory of TCL. 6.Chip list of software programming before SMT

Following chips must be programmed before SMT by tools

Position Chip type Software description

U202 EN25Q32 HDMI HDCP Key, System Software etc.

7.Software update

Method of SW update: 1) Download the bin file to the root directory of your USB device (Do not change the file name); Then insert the USB device to USB interface of TV set. MS306 Series with its upgrade file corresponding relation as thetable below show: Sales Chassis Name Upgrade filename Remark area AP MS306_AP_TCL.bin MS306/MS306P LA MS306_LA_TCL.bin MS306B/MS306BP AP MS306B_TCL.bin DVB-T2 MS306C/MS306CP AP MS306C_TCL.bin DVB-T ISDB-T(Name of Brazil MS306D/MS306DP LA MS306D_TCL.bin version will be changed after its updating ) MS306G LA MS306G_TCL.bin DVB-T2 2) Upgrading method 1

1,using the remote, enter the “Picture” submenu of the OSD; choosing the “contrast” item and press 9,7,3 and 5 in series, Factory Menu will appear in the left top of screen. 2,Select the “USB UPDATE” item , press left or right key to enter the update box;

3,Select “YES” of the dialog box and press OK button to start the update, you will see a progress box on the screen. 4,After updating , the set will reset automatically.

3)Upgrading method 2

1,Press the “MEUN”button of Remote Control, then select the“Software Update(U..>” item in “Option”sub-menu, press left or right key to enter the update box.

2,Press left button Select “YES” of the dialog box and to start the update, you will see a progress box on the screen. 3,After updating , the set will reset automatically.

8, Project ID selecting

1) Press the Menu button of remote control, then select Contrast item of Picture submenu; press 1,9,5,0 consecutively, there you go the Design Menu. 2) Select the SERVICE MENU item, press OK and RIGHT button of the remote to enter submenu,

3) Select the PROJECT ID item, press OK or RIGHT button of the remote to enter the submenu; 4) Press the right or left button of the remote to select the ID you want;

5) After ID selection, press MENU button of the remote to exit DESIGN MENU. 6) Finally, do AC power on/off.

5 4 3 2 1

12V TO 5V 3.3V STANDBY 3.3V FOR DEMOD

5.24V 1 +12V 5VSTB 320mA Max 320mA Max U1 MP1471 L1 6.8uH 5VSTB 5VAIN +3V3STB 3 6 C1 R1 0R 1 2 1 1 VCC3V3 D IN BST 3 IN 3 IN D 1

1UF R3 R2 1 2 C2 C3 2 OUT 4 C4 C5 2 OUT 4 SW

C7 C84 C6 100K 40.2K+/-1% 0.1uF 2.2uF 1 ADJ 0.1uF 10uF 1 ADJ C8 + CE2 C9 C160 C10 5 4 U3 EN FB U2

GND R4 24.9K+/-1% C11 CE3 + AMS1117-3.3V 0.1uF 100uF/16V AMS1117-3.3V 0.1uF 10uF 10uF

10uF NC 0.1uF 1 NC 470uF/10V R5 R6

300K 7.5K+/-1%

1.8V FOR DDR 3.3V FOR TUNER 200mA Max

5VAIN 5VAIN

3 AVDD_DDR_1V8 1 1 TUNER-3V3 IN 3 IN

1

173mA C14 C15 2 OUT 4

C12 C13 2 OUT 4 1

0.1uF 2.2uF 1 ADJ 0.1uF 2.2uF 1 ADJ + U4 220RR7 R1 C16 C17 U5 C18 CE6 AMS1117-ADJ 0.1uF 10uF AMS1117-3.3V 0.1uF 100uF/16V R2 1.2V For Core Power R8 100R

C 700mA Max Vout=1.25V*(1+R2/R1)= C

+1V2_VDDC 5VSTB

U6 SY8088AAC L2 4.7uH/1.5A 1 SW 3 1 2 4 IN 5 3.3V FOR PANEL NC +3V3STB R9 47K 1 R10 15K_1% + EN G ND FB R1 CE5 C21 6

5VSTB C19 C20 2 100uF/16V 0.1uF R12 10uF 0.1uF R11 3 LVDS-3V3 IN 1K 100R P_ON/OFF

DC-DC R2 13K_1% DC-DC C22 C23 2 OUT 4 1 PWR-ON/OFF R13 P_ON/OFF NC/0.1uF NC/2.2uF 1 ADJ Vout=0.6V*(1+R1/R2) U7 C24 C25 C26 NC/AMS1117-3.3V NC/0.1uF NC/10uF NC/10NF

Vout=1.25V*(1+R2/R1)=3.31V

B B 1 1 5V_Switch Panel Power 1 Q2 5 9 5 9 5 9 5VAIN SM2421 VCC-Panel

4 8 4 8 4 8 5VSTB 1 3 1 5VSTB R14 NC 1 3 1

3 7 3 7 3 7 Q1 SM2421 R16 0R/0805 R21 470K C28 C29 +12V 2 6 2 6 2 6 R15 C27 2 R17 2 0.1uF NC/2.2uF/16V H1 H3 H4 100K 1uF 100K Hole/4mm Hole/4mm Hole/3.5mm LVDS-3V3 R18 NC D10 1N4148 C83 1uF

R20 1 1 R131 NC/10K 10K R19 +3V3STB 10K 5 9 5 9

3

H20 H21

4 8 4 8 3 1 Mark 1 Mark PANEL_ON/OFF PANEL_ON/OFF R22 4.7K 1 Q4 P_ON/OFF R23 10K 1 Q3 2N3904 3 7 3 7 2N3904 C30 2

R24 2 2 6 2 6 H22

10K H5 H2 1 Mark C161 4.7uF Hole/4.7mm Hole/4mm NC/100PF

A A

Size Document Number Rev C SHSF3201A10-101S System Power 1 Date: Wednesday, July 30, 2014 Sheet1of9

5 4 3 2 1 5 4 3 2 1

Normal Power 3.3V DDR POWER

+3V3STB AVDD_DDR_1V8 AVDD_ADC AVDD33_DEMOD

E - P A D H O T P L U G A R X D 2 P R X D 2 N D D C D D C K R X D 1 P R X D 1 N D D C D D D A R X D 0 P R X D 0 N R X D C K P R X D C K N H O T P L U G D G N D 2 R E S E T C E C I R I N S A R 2 S A R 1 S A R 0 V D D I O D A T A D D C A D A D D C A C K P W M 1 P W M 0 G N D 1 G P I O 1 1

H D M I 0 SCLHDMI0RX1PHDMIRX0PHDMI0RX0NHDMI 0RX1NHDMI0SDAHDMI 0CLKP 0 C31 C32 C33 C34 C35 C36

C37 C38 C39

2.2uF

0.1uF 0.1uF 0.1uF 0.1uF 0.1uF 2.2uF 10nF 0.1uF +3V3STB L3 Bead +3V3STB L4 Bead AVDDDDR 1V8 PWM0 - ON/OFF HDMHP1HDM I I0RX 2P HDM I0RX2N - C40 C41

VBL CT RL 0.1uF 0.1uF HDMI CEC HDMI PWR HDMI0 CLKNHDMIHP0 ON/OFF PANEL ADJ BRI

SAR0 -

P W M 0 -

SE L B R I A D J -

D AG C Normal Power 1.2V D - ON/OFF - +1V2_VDDC RSTHDM ICECIRINPANELON/OF FVBLCTR LKEY0 - HDMI HP1 HDMI

PWR AU33 VDD33_DMPLL SYSTEM UARTTXUARTRXIF +1V2_VDDC

5124123122121120119118117116115114113112111110109108107106105104 C42 C43 C44 C45 12912812712612 103 U8 0.1uF 0.1uF 0.1uF 2.2uF +3V3STB L5 Bead +3V3STB L6 Bead

C46 C47 0.1uF 0.1uF HDMI1_CLKN 1 +3V3STB HDMI1_CLKN RXACKN HDMI1_CLKP HDMI1_CLKP 2 RXACKP 102 USB1_D+ HDMI1_RX0N HDMI1_RX0N 3 RXA0N DP_P1 USB1_D+

HDMI1_RX0P 4 101 USB1_D- HDMI1_RX0P RXA0P DM_P1 USB1_D-

5 AVDD_MOD1 AVDD_MOD4 100 +3V3STB HDMI1_RX1N HDMI1_RX1N 6 RXA1N DP_P0 99 HDMI1_RX1P 7 98 HDMI1_RX1P RXA1P DM_P0 HDMI1_SDA 8 97 SPI_CS0N

HDMI1_SDA DDCDA_DA SCZ HDMI1_RX2N 9 96 SPI_FLASH-SDO HDMI1_RX2N RXA2N SDO HDMI1_RX2P 10 95 SPI_FLASH-SDI HDMI1_RX2P RXA2P SDI HDMI1_SCL 11 94 SPI_FLASH-SCK HDMI1_SCL DDCDA_CK SCK SPDIF-OUT 12 93 SPI_WP0N SPDIF-OUT ARC PWM2 13 92 SYS_SCL +1V2_VDDC AVDD_12 GPIO[0] VGA_HS VGA_HS 14 HSYNC0 GPIO[1] 91 SYS_SDA RGB0_PB+ RGB0_PB+ C48 47nF 15 BIN0P GPIO[2] 90 TS_SYNC TS_SYNC RGB0_Y-SOG C49 10nF 16 89 TS_VLD RGB0_Y -SOG SOGIN0 GPIO[3] TS_VLD RGB0_Y+ RGB0_Y+ C50 47nF 17 GIN0P GPIO[65] 88 AMP_MUTE AMP_MUTE R25 68R C51 47nF 18 87 RGB0_PR+ C52 47nF 19 GIN0M VDDC2 86 RXO0- +1V2_VDDC RGB0_PR+ RIN0P LVB0M VGA_VS VGA_VS 20 VSYNC0 LVB0P 85 RXO0+ AVDD _ADC 21 84 RXO1- AVDD_ADC AVDD_ADC33 LVB1M +12V RGB2-HDTV_B IN RGB2-HDTV_BINC53 47nF 22 BIN1P MSD1306XS LVB1P 83 RXO1+ LVDS OUTPUT RGB2-HDTV_SOGIN RGB2-HDTV_SOGINC54 10nF 23 SOGIN1 AVDD_MOD3 82 +3V3STB VCC-PANEL RGB2-HDTV_GIN RGB2-HDTV_GINC55 47nF 24 GIN1P LVB2M 81 RXO2- CN2 CN3 R26 68R C56 47nF 25 80 RXO2+ GIN1M LVB2P 40

RGB2-HDTV_RIN RGB2-HDTV_RINC57 47nF 26 RIN1P LVBCKM 79 RXOC- 39 1 41 32 2 L I N E I N R 3 L I N E I N L 4 L I N E I N L I N E I N R 5 L I N E O U T L 3 L I N E O U T R 3 L I N E O U T L 0 L I N E O U T R 0 X O U T X I N A V D D D M P L L A V D D R E F I P I M T A G C V D D I O C M D G P I O [ 5 5 ] G P I O [ 5 6 ] A V D D P L L V D D C 1 L V A 4 P L V A 4 M L V A 3 P L V A 3 M 7 VSYNC1 LVBCKP 78 RXOC+ 2 28 77 RXO3- 38 2

9 HSYNC1 LVB3M 76 RXO3+ CN1 2*20P_2.0MM 37 BL_ON/OFF 3 3 BL_ON/OFF AV-CVBS1P C58 47nF 30 CVBS2 LVB3P 75 RXO4- 6 DIMMING 4 AV-CVBS1P CVBS1 LVB4M DIMMING 5 31 74 RXO4+ 39 40 35

R27 68R C59 47nF 32 CVBS0 LVB4P 73 RXE0- RXO0+ 37 39 40 38 RXO0- 34 6

CVBS_OUT0 33 VCOM LVA0M 72 RXE0+ RXO1+ 35 37 38 36 RXO1- 33 7

3 3 CVBS_OUT0 CVBSOUT1 LVA0P 5 36 2 8 34 71 RXE1- RXO2+ 33 34 RXO2-

AU33 AUVRM 35 AVDD_AU33 LVA1M 70 RXE1+ RXOC + 31 33 34 32 RXOC- 31 9

AUVAG 36 AUREFM LVA1P 69 RXE2- RXO3+ 29 31 32 30 RXO3- 30 10 2 2 1 AUVAG LVA2M 9 30 9 1 37 68 RXE2+ RXO4+ 27 28 RXO4- R28 0R LINEIN_L1 LVA2P 27 38 67 25 28 26 28 12 RXE3+ LINEIN_R1 AVDD_MOD2 +3V3STB 25 66 RXEC- 23 26 24 BIT_SEL 27 13 RXE3-

LVACKM 65 RXEC+ 21 23 24 22 LVDS_SEL 26 R29 0R 14

LVACKP RXE0+ 19 21 22 20 RXE0- 25 15 RXEC+ L5 1 2

_ 9 4

R4 20 16

_ RXE1+ 17 18 RXE1- RXEC-

RXE2+ 15 17 18 16 RXE2- 23 R30 0R 17

RXEC+ 13 15 16 14 RXEC- 22 18 RXE2+ LINEI N 1 LINEIN L3 LINEIN 3 2 RXE3+ 11 14 12 RXE3- 1 19 RXE2- 11 12 20 20

MSD1306 RXE4+ 9 10 RXE4-

7 9 10 8 19 RXE C+ 21 RXE1+ 394041424344 4546474849505152535455565758596061626364 1 2 7 8 8 2 5 6 RXEC- RXE1- 5 6 17 23

3 4

C 1 3 4 2 16 RXE2+ 24 RXE0+ C 0603 1 2 15 25 0603 RXE2- RXE0- 1 4 26

13 RXE1+ 27 1 1

AVDD33 2 RXE1- 28 AVDD

VCC-PANEL 11 29 +3V3STB

+1V2 1 0 RXE0+ 30

C6 1 2. 2UF

9 RXE0- CL K 31

R X E 4 + C 6 0 AGC DDRTS VIFM TSD0 8 NC/30P_0.5mm V IF P A V AU RIN 1 R31 NC/0R 7

VIFP VDDC

6 AV AULIN1 2.2 UF - VIFM RX E 3 + SD0T CLKT

1V8_ 1V8_ - R32 NC/4.7K BIT_SEL 5

S A M P - A U O U T L 0A M P - A U O U TR 0A V - A U O U T L3A V - AU OU TR 3X TA LOX TA LI DM PLLV DD 33DE MOD RXE3 4 RX E 4 1 1 1 R33 NC/4.7K 3 +3V3STB 2 VCC-PANEL

V A V A R34 0R/NC LVDS_SEL 1 42 AURIN1 NC/40P_0.5mm AULI N1

FOR ALL LVDS FOR 16 CMO/AUO/BOE HD LVDS FOR 19 CMO/AUO/BOE HD LVDS

AV-AUOUTL3 AV-AUOUTL3

C62 R35 +3V3STB RESET CIRCUIT Chip config

220pF 200K SERIAL FLASH +3V3STB +3V3STB Debug port

3 AV-AUOUTR3 AV-AUOUTR3 D1 IF-AGC-SEL R36 4.7K L7 +3V3STB

BAV99L R39 Bead R38 1

C63 R37 300k C64 BRI_ADJ-PWM0 R40 4.7K 4.7K 1 1 U9

1

1 2 220pF 200K 2 C65 2.2uF R42 R43

Q5 SPI_CS0N 1 8 C66 100NF CS# VCC R41 4.7K 1 NC SPI_FLASH-SDO 4.7K 4.7K 2 7

DO HOLD# 2N3906 3 UART_RX 68R R44 UART-RX UART-RX

AMP-AUOUTR0 AMP-AUOUTR0 R45 1K SYSTEM-RST SPI_WP0N 1K R46 3 WP# CLK 6 SPI_FLASH-SCK UART_TX 68R R47 UART-TX UART-TX

C68 4 5 SPI_FLASH-SDI C67 R48 2.2uF R49 C70 C69 R50 GND DIO 220pF 200K 1nF 10uF 10K

22K 1 B EN25F32 1 B

AMP-AUOUTL0 AMP-AUOUTL0

C71 R51 220pF 200K

TUNER_VCC System XTAL TUNER_VCC Audio AUVRM R52 C72 33pF XTALI

AUVAG 1

C73 C74 Y1 R55

R54 10K 24MHZ_22PF 1M HDMI_CEC R56 NC/33R RESETN RESETN R53 0.1uF 10uF_0805 TAGC TAGC R57 0R AGC

4.7KSYS_SDA SYS_SDA C75 33pF2 R58 0R XTALO 4.7K SYS_SCL C76 L8 Close to IC SYS_SCL 22nF Close IC

FB_0603 with width trace

KEY & IR 5VAIN +3V3STB

+3V3STB

1 1 IF-AGC-SEL IF-AGC-SEL 1

C77 0.1uF R59

1

1 CN4 1

1 100K R60 5 LED_G CN5 4.7K R62 4 3 R61 68R IRIN R65 4.7K 4 R63 4.7K 5VAIN LED_G R64 2.2K NC/0R

2 R67 0R 3 R66 4.7K KEY0-SAR0 3

1 +3V3STB 2 1 R68 0R +3V3STB Q6 1 C87 1 4.7K R69 P_ON/OFF 1

1 P_ON/OFF

5P_2.0mm TP60 1 C85 C78 C79 C80 C90 C81 C82 3904 1

NC/22PF 4P_2.0mm 2 A 0.1uF 0.1uF 22PF 0.1uF NC/0.1uF 0.1uF NC/10uF A 2

2TP45

Size Document Number Rev Custom SHSF3201A10-101S MSD1306 1 Date: Wednesday, July 30, 2014 Sheet 2 of 9

5 4 3 2 1 5 4 3 2 1

YPBPR & AV INPUT AUDIO & VIDEO OUTPUT

1 D D CON1 MINI AVOUT 2 R70 33R CON2 AV-CVBS1P 1 1 1 3 AV-ROUT 3 HD_Y R71 33R 4 AV-LOUT 4 Y/V 3 R73 33R RGB2-HDTV_GIN RGB2-HDTV_SOGIN 1 AV-VOUT 5 AV-LOUT 5Pb/R2 2 HD_Pb R75 33R RGB2-HDTV_BIN 6 1 7

6Pr/L1 1 HD_Pr R78 33R RGB2-HDTV_RIN

R8 0 R8 2

R81 1 1 1 C88 C89 C86 L9 220R Bead AV3-6pin YPBPR 5VAIN 22PF22PF22PF

PJ-86-GP 75 R C96 C97 R96 R97 75 R

75R 2 2 2 10uF 0.1uF Q9 1k 68K

3906 3 3904 1 C98 CVBS_OUT0 Q10 10uF_0805 CVBS_OUT0

1 AV-VOUT R99 75R 150R R1012 R103 1 R102 C 33K C 150R

2

1 1

AV-LOUT R199 47R C100 2.2uF AV-AUOUTL3

AV-ROUT R139 47R C162 2.2uF AV-AUOUTR3

1 1 R198 R197

100K 100K

2 2 AV/YPBPR/VGA AUDIO INPUT

B B

CON3

AV_L AV_L 1 R94 10K 3 Y/V 2 AV_AULIN1

1 C95 R95 TP47 AV_R 560PF 4Pb/R1 1 12K 2

AV2-4pin LR

1 AV_R R98 10K AV_AURIN1

1 C99 R100

560PF 12K

2

A A

Size Document Number Rev

Custom SHSF3201A10-101S YPBPR & AV OUT 1 Date: Wednesday, July 30, 2014 Sheet 3 of 9

5 4 3 2 1 5 4 3 2 1

VGA VIDEO1 6

CON4 15 5 D 10 D

14 4 R104 33R RGB0_PB+ 1 1 1 9 13 2 3 R105 33R RGB0_Y+ 8 12 2 R106 33R RGB0_Y-SOG 7 11 1 1 R107 33R RGB0_PR+ 6

R108 R109 R110 1 1 1

17 VGA

1

75R 75R 75R 1 2 2 2

2 2

1

2 1

1

C 1 C

R111 0R UART-RX 1

R112 0R UART-TX

R113 68R VGA_HS 1 R114 68R VGA_VS

1 R115 100R UART-TX R117 R118

1 1

R116 100R UART-RX 2

1 10K 10K 1 2 1

B B USB 5VAIN L10 1 FB_1206 R119 5.1R 2 USB1_D- R120 5.1R 3 USB1_D+ 1

4 C101 CE4 C102 C103 5 1 1 1 1 6 + 22PF 22PF

CON5 0.1uF 100uF/16V 2 2 USB

A A

Size Document Number Rev

Custom SHSF3201A10-101S VGA & USB INPUT 1 Date: Wednesday, July 30, 2014 Sheet 4 of 9

5 4 3 2 1 5 4 3 2 1

HDMI 1 INPUT D D 42

DATA2+ 1 31 HOTPLUG DATA2 SHIELD 2 RP1 10ohmX4 HDMI1_RX2P

DATA2- 3 86 HDMI1_RX2N H1_5V H1_5V

20 4 5 7

DATA1+ HDMI1_RX1P GND1 DATA1 SHIELD 5 HDMI1_RX1N 21 DAT1A- 6 GND2 7 2 DATA0+ RP2 4 10ohmX4 R121 22 8 1

HDMI1_RX0P GND3 DATA0 SHIELD 9 R122 86 DATA0- 3 HDMI1_RX0N

23 CLK+ 10 5 7 HDMI1_CLKP 正常工作时为高 1K GND4 11 10K CLK SHIELD HDMI1_CLKN 12 HPD_SINK1 CLK- 13 CEC CEC 3 14 NC R124 22R Q11 R125 4.7K SCL 15 HDMI1_SCL 1 HDMI_HP1 SDA 16 R126 22R HDMI1_SDA MMBT3904 17 DDC/CEC GND 2 +5V POWER 18 R127 R128 19 HPD_SINK1 HOT PLUG 10K 10K CON6 HDMI_A CEC HDMI_CEC R123 NC/220R 1

H1_5V

C C

HDMI 2 INPUT 42

DATA2+ 1 31 HOTPLUG DATA2 SHIELD 2 RP3 10ohmX4 HDMI0_RX2P

DATA2- 3 86 HDMI0_RX2N H0_5V H0_5V

20 4 5 7 DATA1+ HDMI0_RX1P GND1 DATA1 SHIELD 5 HDMI0_RX1N 21 DAT1A- 6 2 GND2 DATA0+ 7 4 1 22 8 RP4 10ohmX4 HDMI0_RX0P R129 GND3 DATA0 SHIELD 9 3 DATA0- 86 HDMI0_RX0N 75 23 CLK+ 10 HDMI0_CLKP 正常工作时为高 1K R130 GND4 CLK SHIELD 11 HDMI0_CLKN 12 HPD_SINK0 10K B CLK- B 13 CEC CEC 3 14 NC R132 22R Q12 R134 4.7K SCL 15 HDMI0_SCL 1 HDMI_HP0 SDA 16 R133 22R HDMI0_SDA MMBT3904 17 DDC/CEC GND 2 +5V POWER 18 R135 R136 19 HPD_SINK0 HOT PLUG 10K 10K

CON71 HDMI_A

1

H0_5V

CON8 4 R137 NC/0R 2 1 C104 NC/1uF/16V 0603 SPDIF-OUT 3

1 NC/SPDIF 1F38 R138 CLOSED TO MSD1306 A A

2 NC/100R

SPDIF OUTPUT

Size Document Number Rev

Custom SHSF3201A10-101S HDMI INPUT 1 Date: Wednesday, July 30, 2014 Sheet 5 of 9

5 4 3 2 1 5 4 3 2 1

TUNER AGC,Close TUNER VCC3V3 R159 NC/0R R160 NC/0R VCC3V3 4 8 4 7 4 6 4 5 4 4 4 3 4 2 4 1 4 0 3 9 3 8 3 7 R148 R149

D 1V2 Q13 Q14 4.7K 4.7K D TU_AGC 3 3906 2 TAGC TAGC TU_AGC 3 3906 2 IF_AGC_DM

TSSY NCTS VLDT S0 TUNER_VCC 1 TU1_SDA R153 75R TUNER_SDA C126 C127 33pF 33pF TU1_SCL R154 75R TUNER_SCL Y2 TUNER_VCC SYS SDA 1 1 2 R162 R163 10K 100K C131 C132 R152 NC/0RSYS_SCL

24MHz22PF I 2 C S S D A V D D 3 G N D 8 V D D 3 3 3 T S S Y N C T S V L D T S D [ 0 ] U13 NC/100pF NC/100pF SYS_SCL 3 MSB101AD R165 R166 R156 NC/0RSYS_SDA SYS_SDA R150 1M 1K 100K 2 VCC3V3 R151 Q15 1 R168 100K 0R VCC3V3 3904 SYS_SCL 1 36 TSD[1]TSD[2]TSD[3]TSD[4]TSD[5] 3 R155 2 I2CS_SCL TS_D[6] 35 Q16 1 R170 100K IF-AGC-SEL NC/10K XTAL_OUT 3 GND1 TS_D[7] 34 TSCLK 3904 IF-AGC-SEL

XTAL_IN 4 XTAL_OUT TS_CLK 33 MSPI_CSZ R157 DVB-T2 R155 NOT USE 5 XTAL_IN MSPI_CSZ/SSPI_CLK 32 MSPI_DO 10K 2 DVB-T2 R158 USE VCC3V3 MSPI_WP 6 AVDD_MPLL MSPI_DO/SSPI_DI 31 MSPI_DI RFAGC MSPI_DI/SSPI_DO IF_AGC 7 1 3 1 4 1 5 1 6 1 7 1 8 1 9 2 0 2 1 2 2 2 3 2 4 30 IFAGC GND7 C133 100nF 8 QP RESETZ 29 RESETN RESETN SERIAL FLASH R158 C134 100nF 9 28 MSPI_CLK VCC3V3

A V D D 3 3 A D QMC G N D 3 S A R R S S I A V D D S A R V D D 1 G N D 4 G P I O [ 0 ] MSPI_CLK/SSPI_CSZ 1

10K 10 27 1

GND2 VDD33_2 VCC3V3 1 IF+ C135 100nF 11 26 C136 U11 GD25Q41BTIG IP GND6 IF- C137 100nF 12 IM VDD2 25 1V2 10uF MSPI_CSZ 1 CE# VDD 8

MSPI_DO 2 7

SO HOLD# 1

VCC3V3 I2CM SCLI2CMSDAGND5VDD331TSERR 1 1 MSPI_WP R141 33R 3 WP# SCK 6 MSPI_CLK 4 5 MSPI_DI C TS_ERR IS LOW FOR I2C ADDRESS 0XD2 C120 VSS SI C TS_ERR IS HIGH FOR I2C ADDRESS 0XF2 C105 C106 C109 C110 C114 C115 100nF 100nF 100nF 100nF 100nF 100nF 1uF R161 VCC3V3

CONF IGUR ETUN ERSC LTUN ERSD A 10K

R164 10K 1V2 +1V2_VDDC NEAR IC VCC3V3 1V2 VCC3V3 L12 200R-Bead IF_AGC_DM R167 0R IF_AGC

R169 DVB-T R169 USE C117 C118 C119 C121 C138 IF Interface Filter NC/10KDVB-T2/ISDB-T R169 NOT USE 100nF 100nF 100nF 10uF 22nF DEMOD TUNER IF AGC TU_IF-R142 100R IF- L13 1uH L14 2.2uH C122 100nF VIFM C123 R143 56pF C124 510R 33pF TU_IF+R144 100R IF+ L15 1uH L16 2.2uH C125 100nF VIFP

TP29TP30TP31 1 B U10 1 B

NC/ATV 1 1 47R R192 TS0 TS_D0 14 GND NC 1 3V3 2 TUNER_VCC L11 500R L23 1R/1206TUNER-3V3 TUNER-3V3 TS_CLK TS_CLK 47R R145 TSCLK 13 GND SCL 3 TU1_SCL 4 TU1_SDA TS_VLD 47R R146 TSVLD SDA 5 C107 C108 C111 C112 C113 TS_VLD GND NC 6 TP32 100nF 4.7uF 10nF 10uF 10uF TS_SYNC TS_SYNC 47R R147 TSSYNC 7 NC 12 8 TU_IF+ 1 C130 C129 C128 GND IF_N 9 TU_IF- IF_P 11 10 1 TU1_AGC R140 100R TU_AGC 22pF 22pF 22pF NEAR IC

GND IF_AGC

1 1 1 C116 100nF TP33TP34TP35

U12 XF-1SN

1 13 GND GND 1 NC 2 12 GND GND 3 4 TUNER_VCC Vcc 5 TU1_SCL SCL 6 TU1_SDA SDA 7 TU1_AGC 11 IF_AGC 8 TU_IF+ GND IF_P 9 TU_IF-

IF_N 10 GND 1 A A

Size Document Number Rev Custom SHSF3201A10-101S TUNER INPUT 1 Date: Wednesday, July 30, 2014 Sheet 6 of 9

5 4 3 2 1 5 4 3 2 1

D AMP_PWR L17 0R/600ohm/100M/3A +12V H/W AMPLIFER D

C139 C140 C141 C142 CE7 100nf 100nf 1nf 1nf 470uF/25V/LOWESR Mute

5VAIN +12V U14 TPA3113D2

R174 R175 AMP-EN L:MUTE 1 28 AMP_PWR R171 SD PVCC1 L27 NC NC/22K C144 R172 1K 2 27 330PF/NC FAULT PVCC2 MUTE_C

R176 200R C143 1uF L18 22uH NC/0R NC 3 AMP-AUOUTL0 3 LINP BSN2 26 C145 220nF 2 1 AMP-Lout+ Q17 R173 0R C146 1uF 4 25 C147 NC/2.2K D3 NC/1N4148 R177 1 NC/2N3906 LINN OUTN2 1uF/25V

R178 10K 5 24 2 GAIN0 PGND2 L28 NC R179 NC/3K D4 NC/1N41484.8V R181 4.6V R180 NC/0R 6 23 C148 GAIN1 OUTN1 1uF/25V R185 R184 CE8 AMP_PWR R186 10R 7 22 C149 220nF L19 22uH AMP-Lout- + AVCC BSN1 2 1 NC/10K C C150 1uF 8 21 C151 220nF L20 2 122uH AMP-Rout- NC/47K NC/100K NC/100uF/16V C AGND BSP2 C153 C152 1uF 9 20 R187 15K GVDD OUTP2 L29 NC R188 6.8K 10 19 1uF/25V PLIMIT PGND1 C154 1uF C156 1uF 11 18 C155 RINN OUTP1 L21 22uH 1uF/25V R189 0R C157 1uF 12 17 C158 220nF 2 1 AMP-Rout+ RINP BSP1

AMP-AUOUTR0 R190 200R 13 16 NC PVCC3 L30 NC 14 PBTL PVCC4 15 AMP_PWR R191 C159

NC/22K 330PF/NC 2 9

2 9 L=Mute Mute 5VAIN H=Turn ON

+3V3STB B MUTE_C R193 B R194 10K CN6 R208

10K 1 J-B2.54-4P-L TP1 AMP-Lout+ 1 AMP-EN

TP2 1 AMP-Lout- 2 4.7K 3 TP3 1 AMP-Rout- 3 TP4 1 AMP-Rout+ 4 Table:Gain Setting AMP_MUTE R195 10K 1 Q19 1 R196 2N3904

2 GAIN0(Pin 5) GAIN1(Pin 6) AMPLIFIER GAIN INPUT IMPEDANCE 4.7K 0 0 20dB 60 KΩ 1 0 26dB 30 KΩ 0 1 32dB 15 KΩ 1 1 36dB 9 KΩ

A A

Size Document Number Rev

Custom SHSF3201A10-101S AMP 1 Date: Wednesday, July 30, 2014 Sheet7 of9

5 4 3 2 1 5 4 3 2 1

AC220 to DC12V&DC36V 1 1A D16 MUR460 LED-VCC LED-VCC

D RP5 RP6 RP7 CP10 100pF/1KVC5.0CT D

100K/1206 100K/1206 100K/1206 1 1 CE10 CE13 1 CE14 RP9 RP10

CP1 2 100uF/450V 2200pF/630V 33uF/100V 33uF/100V 47K/0805 NC D6 D11 RP11 RP12 RP13 JP2 RL255 RL255 100K/1206 100K/1206 100K/1206 NC 11 1 6 6 ! 11 2 JP3 1 NC D14 FR207 D19 FR207 +12V 3 D18 1

10 1 D5 D7 L24 5 10 1 2 HBR10150S +12V SB 2A RL255 RL255 FBDOUBLE

1 2 4 4 9 9 RP14 150K/1206 RP15 150K/1206 D 3 8 8 CP3 1000pF/1KVC5.0CT L31 BD M O S - 2 1

CE19 CE18 RP18 2 U17 D8 1N4148 2 2 470uF/25V 470uF/25V NC

LD7536RGL 1 1 7 7 1 6 RP19 10R/0805 RP21 22R/0805 1 CP4 GND GATE T1 3300pF/50V0402 SHS2404A2-101S-T1

2 5 3 ! FB VDD D1 2 RP22 CP11 3 2 10K/0603 CY3 1000pF/250Vac

ZMM18V LF2 3 4 NC/100pF/2KVC5CT Q18N D D 60N 550U 1T4G SHS2404A-101S-LF2 RI SENSE RP23 220R/0603 C 4 1 ! C

1 RP25

0.3R-3WS RT1

! 2R5D11 2 4.7R/1206 6 6 11 11

! RP27 CP5 5 CX1 0.33uF/275V 100K/0402 100pF/50V0402 10 10 RP26

D13 FR107 4 4 9 9

! ! ! 3 8 8 RP35 RP36 RP37 CP7 CE20 2 2 1M/1206 1M/1206 1M/1206 0.1uF/50V0603 22uF/50V 1 1 7 7

! ! 1 RP38 RP39 RP40 T2

! 1 NC 1M/1206 1M/1206 1M/1206

! ! B B CY1 CY2

220pF/250Vac 220pF/250Vac +12V SB+12V

2 ! 3 LF1 SHLD3204F-101S-LF1 ! RP28 1.8K/0805

1 4 1 4 U15 RP30 VR1 NC H27 H31 H24 H26 BPC-817MB 2K/0805

2 1 2 MOS-D 2 MOS-D 2 +12V SB 2 +12V SB 2 RP31 3

2 18K/0402 1 MOS-D 1 MOS-D 1 +12V SB 1 +12V SB

F19 ! NC NC NC NC CP9 100nF/50V0603 RP32 4.7K/0402 1 1

! 3

T3.15AH/250VAC H28 H30 H25 1

2 MOS-D 2 MOS-D 2 +12V SB 1 2.5V 1 1

1

1 MOS-D 1 MOS-D 1 +12V SB 2 U16 L N TL431 RP33 RP34 2 ! NC NC NC NC/0402 4.7K/0402 A CN7 H29 CN10 CN11 A SA-2S-486 2 MOS-D +12V SB +12V SB 3 +12V SB 3 +12V SB 2 2 1 MOS-D 1 +12V SB 1 +12V SB

NC SIP3/2.54 NC/3P_2.54mm

Size Document Number Rev

Custom SHSF3201A10-101S AC Power Supply 1 Date: Wednesday, July 30, 2014 Sheet 8 of 9

5 4 3 2 1 5 4 3 2 1

LED Driver CB1 100pF/1KVC5.0CT DIP L22 2 150uH4 L26 D15 SB5150 D LED-VCC LED-VCC 1 3 L25 1 2 BD1206 1 2 LED+ D DIP BD1206

RB3 + + D - 1M/0805 CE16 CE15 CB2 CB3 22uF/160V NC/22uF/160V 1000pF/1KV 1206

SOT223 100pF/1KVC5.0CT

R1 1 RB7 Q20 910K/0805 GATE-IN RB6 10R/1206 SOT223-G AOD256

S OVP-IN RB8 0R/0402 - RB34 OUT PUT :92 V CB4 RB9 10K/0402 SOT223 320 MA* 1 100pF/0402 R2 20K/0402

ISENSE-IN RB10 220R/0402 1

1 LED+ 10 1 10 CB5 RB11 RB12 RB13 RB14 LED+ 9 100pF/0402 0.36R/1%/1206 0.36R/1%/1206 0.36R/1%/1206 NC 8 9 CN8 SMD-R1206 SMD-R1206 SMD-R1206 SMD-R1206 LED1 7 8 J-B2.0-10P-W LED2 6 7 LED3 5 6 5 LED4 4 4 3 3 C LED+ 2 C 2 LED+ 1 1 Q21

1 SOT223-G ADJ LED1 6 LED2 5 6 SOT223-4D OUT 2 SOT223-D 5 LED3 4 CN9 4 3 SOT223-S LED4 3 NC IN 3 RB35 NC 2 2 LED+ 1 B L O N / O F F NC 1

D17 NC CB6INS16218348 U18 1uF/0603 16V MP3398AGF

ON/OFF COMP GND 1 +12V SB RB16 4.7R/1206 15 VIN GATE 14 GATE-IN +12V SB +12V CB7 0.47uF/50V/0603 16 13 ISENSE-IN VCC ISENSE RB17 RB19 RB20 RB21 CB8 0.47uF/50V/0603 RB18 270R/0603 1 4 NC/0805 NC/0805 NC/0805 NC/0805 VBL_CTRL RB23 10K/0402 BL_ON/OFF BL_ON/OFF OVP-IN VBL_CTRL 2 EN OVP 12 1 RB24 300K/0402 5 11 LED1 RB25 CB10 OSC LED1

BL_ON/OFF 7 10 B B RB36 0R/0402 ADIM LED2 CB11 RB27 D I M M I N G

100K/0402 100NF/0402 BL_PWM 3 9 100pF/0402 0R/0402 PWM LED3 PAD - 6 ISET LED4 8 E 1 LED2

RB31 RB32 CB15 CB12 RB29 17 RB37 100pF/0402 0R/0402

24K/0402 27K/0402 100pF/0402

PWM NC/0R 1 1 LED3

BRI_ADJ-PWM0 BRI_ADJ-PWM0 RB28 10K/0402 BL_PWM CB16 RB33 100pF/0402 0R/0402

RB30 CB14 1 100K/0402 1NF/NC LED4

CB17 100pF/0402

A A

Size Document Number Rev

Custom SHSF3201A10-101S LED Driver 1 Date: Wednesday, July 30, 2014 Sheet9 of9

5 4 3 2 1 Trouble shooting

1、 Can not switch on:

no switch on

NO Check 3.3V/12V/24V of power supply

Check PW Only 3.3V

yes

Y — , Check signal P ON Check DC-DC DIMBL—ON of main IC link part,check to PW

N Y

Check the peripheral circuit Check reset of mail IC,check solder of signal of main main IC,check data fo NVM Check IIC bus and reset it

i Check crystal frequence 2、abnormal picture :

Abnormal picture

Individual signal source All signal source bad bad

Check the path with this signal source Check panel ID?

Check LVDS signal to main Check the peripheral circuit IC?check LVDS cable? of mail IC,updating SW,reset NVM,replace main IC

Check crystal frequence? 3、 Abnormal sound:

Abnormal sound

Individual sound Check all sound signal source source

Check the sound signal Check sound IC link to main IC N Y N Check the power of Check the peripheral Check wave filter and sound IC circuit of main IC,SW speaker? Y

Check the mute function