Drawplates ROUND DRAWPLATES

12.04 Tools Metal Forming 3/7/06 4:48 pm Page 397

Hammers & Mallets HIGH QUALITY STRETCHING, PLANISHING, BLOCKING & DOMING, RAISING & POLISHING HAMMERS

Code Description Price/£ Stretching Hammer: 999 89R 999 89R 23.65 Stretching Hammer Weight = 580gms Rectangular Domed Face 32 x 17mm 32 x 22mm 999 89S Planishing Hammers:

999 89S 23.65 Planishing Hammer Weight = 540gms Round Flat Face = 30mm Round Domed Face = 30mm 999 89X 999 89X 23.65 Planishing Hammer Weight = 256gms Round Flat Face = 25mm Round Domed Face = 25mm Polishing Hammers:

999 89T 999 89T 22.58 Polishing Hammer Weight = 510gms Ball Face = 30mm Domed Face = 30mm Blocking & Raising Hammers:

999 89U 22.58 Blocking Hammer 999 89U Weight = 533gms Round Face Ball = 31mm (shallow dome) Round Face Ball = 31mm (deep dome)

999 89V 23.65 Raising Hammer Weight = 550gms Rectangular Face Domed 40 x17 mm 999 89V Rectangular Face Domed 40 x 14mm

999 89W 19.43 Blocking or Doming Weight = 175gms Ball Domed Face = 14mm Ø Ball Domed Face = 12mm Ø

999 89W Looking Silversmithing Stakes? See page 403 TOOLS

order on-line www.cooksongold.com 397 12.04 Tools Metal Forming 3/7/06 4:48 pm Page 398

Hammers & Mallets RAWHIDE MALLETS, BOSSING HAMMERS, RIVETING HAMMERS

999 602 - 999 605 Code Description Price/£ Rawhide Mallets:

999 602 Rawhide Mallet Size 1 11⁄4” 10.20

999 603 Rawhide Mallet Size 2 11⁄2” 12.90

999 604 Rawhide Mallet Size 3 13⁄4” 13.75

999 605 Rawhide Mallet Size 4 2” 17.60

999 609 - 999 611 Bossing Hammers:

999 609 Small Bossing Hammer 11⁄2”(35mm) head 14.58

999 610 Medium Bossing Hammer 2”(50mm) head 18.10

999 611 Large Bossing Hammer 21⁄2”(60mm) head 20.57 999 617 - 999 89N Riveting Hammers:

999 617 Riveting Hammer 50mm 6.80 999 89M Riveting Hammer 60mm 7.37 999 89N Riveting Hammer 70mm 7.94

Economy 999 89P - 999 890 999 89P Jobbing Hammer Ball Pein 4oz/ 128g head /180 overall 8.38

999 89O Jobbing Hammer 1oz / small pein 5.83 Nylon Headed hammer: 999 608 999 608 Hammer with 25mm nylon heads 7.96

999 608A Replacement head 999 608A for above 1.10

Looking Bangle Madrills? See page 404

local rate 398 orderline 0845 100 1122 12.04 Tools Metal Forming 3/7/06 4:48 pm Page 399

Metal Forming Tools DOMING BLOCKS & PUNCHES, DISC CUTTING SET

Code Description Price/£ Doming Blocks:

999 757 31.77 Brass Doming Block - 17 hole hole width 4.5 to 39.0mm 999 758 999 755 999 758 49.10 SPOTLIGHT ON...... Steel Doming Block - 17 hole hole width 4.5 to 42.0mm Doming Blocks 999 759 85.80 & Punches Large Flat Steel Doming Block - 31 hole hole width 2.0 to 32.0mm The metal thickness determines the size of the punch used with the required 999 0969 45.63 die. A similar diameter of punch and die should be used for thin gauge of Flat Steel Doming Block - 27 hole metals and thicker gauges require a larger die and smaller punch. hole width 2.5 to 24.0mm 999 755 209.00 Large doming block + set of 31 punches on a stand 999 CI4 247.50 Steel doming cube + set of 21 punches on a stand

Doming Punches:

999 764 35.24 999 CI4 Set of 15 Steel Doming Punches 999 759 hole width 5.0 to 19.0mm 999 765 37.52 Set of 3 doming punches. Diam. 25, 31.1, 37.6 mm 999 0971 30.62 Set of 18 steel doming punches 2.5mm - 14mm 999 766 127.05 Set of 31 steel doming punches 2mm - 32mm 999 764 999 765 999 767 36.96 Set of 12 boxwood doming punches

999 772 Disc Cutting Set:

999 772 28.60 Disc Cutting Set (small). To cut a maximum of 1.0mm sheet. To cut discs from approximately 5mm - 16mm diameter. 999 ST05* NEW! NEW! 64.00 Disc Cutter 11 punch set This adjustable disc cutters will produce discs NEW! from soft metals up to 3mm thick, in the following diameter 3.17, 4.77, 6.37, 7.88, 9.47, 11.07, 12.69, 15.87, 19.08, 22.18, 25.40

999 ST06* NEW! 175.00 Disc Cutter 17 punch set This disc cutter will cut discs from metal up to 999 ST05 4mm thick, in sizes for 2 to 18mm in 1mm incre- 999 ST06 ments. * Special Order TOOLS

order on-line www.cooksongold.com 399 12.04 Tools Metal Forming 3/7/06 4:48 pm Page 400

Metal Forming Tools STEEL SWAGE BLOCKS, ANVILS, FLAT STAKES

Code Description Price/£ Swage Block:

999 776 Swage Block large 5 groove 49.10

999 776 999 777 999 777 Swage Block 6 groove 13.92

999 778 Swage Block 10 groove 50.05

999 779 Swage Block 12 groove 40.43

999 780 Swage Block Cube 19 groove - 3 shape: 999 779 999 778 1.5, 2.0, 2.5, 3.0, 3.5, 4.0, 4.5, 6.0, 7.5, 10.0, 12.5mm 60.67

999 77A 999 77A Swage Cube Set With Punches 121.28

Steel Anvil:

999 785 Steel Anvil - sparrowhawk 37.57 Also know as a Bick Iron

999 786 Steel Anvil - small 16.66 999 780 Flat Stake: Hardened steel bench blocks: 999 791 Flat Stake - 8 x 8cm 14.91

999 793 Flat Stake - 5cm x 5cm 9.85

999 786 999 794 Flat Stake - 6cm x 6cm 10.73

best seller! 999 795 Flat Stake - 10cm x 10cm 17.88

999 796 Flat Stake - extra large 999 785 13cm x 13cm 28.56

999 793

SPOTLIGHT ON...... OTHER PAGE STAKES...... Flat stakes 403

These Flat Stakes or Bench Blocks are useful for flattening objects, BENCH PEGS PAGE laying out work or chasing. They are made of tool steel ground flat, WITH ANVILS...... polished and case-hardened. 375

local rate 400 orderline 0845 100 1122 12.04 Tools Metal Forming 3/7/06 4:48 pm Page 401

Triblets STEEL

For prices and measurements, see table on the opposite page. 999 819

999 820

999 823

999 822

999 829

999 831

999 836

999 837

Looking 999 843 Mallets? Turn to page 398

PAGE PAGE FLAT STAKES...... 400 VICES...... 373 TOOLS

order on-line www.cooksongold.com 401 12.04 Tools Metal Forming 3/7/06 4:48 pm Page 402

Triblets STEEL

Triblet A = Tip, B = Top, C = Length inc handle Profile Code Measurement ( mm ) Price ABC

Round 999 819A 3 10 220 9.01 999 819 5 12 225 11.55 999 CBS 6 18 270 14.45 999 820 10 28 400 15.60 Round, A-Z+6 marked, Wheatsheaf 999 823 10 25 330 20.22 Round with centre groove 999 822 10 25 450 19.46 Round,A-Z+6,with groove 999 824 10 25 330 22.93

Round - plain extra hard 999 821 10 25 330 34.26

Square - sq.edge 999 829 4 x 4 10 x 10 270 24.99

Square - cushion (rounded edge) 999 831 10 x 10 25 x 25 350 35.42

Oval 999 836 4 x 6.5 15 x 20 230 27.32 999 837 8 x 12 26 x 34 320 34.50

Pear (drop) 999 842 6 x 4 18 x 14 280 41.64 999 843 13 x 8 34 x 24 350 47.59

B A C A (small line on right) B (Smallish line on left) C Full length of triblets.

Code Description Price/£

Wire & Strip Bender: 999 1013 999 1013 Supplied with 3 shapes & will bend up to 5mm sheet 164.01

Looking Wedding Ring Blanks? See page 55

local rate 402 orderline 0845 100 1122 12.04 Tools Metal Forming 3/7/06 4:48 pm Page 403

Stakes SILVERSMITHING STAKES

999 858 999 871

Code Price/£ Silversmithing Stakes: 999 859 999 878 999 858 17.91 999 859 18.77 999 860 21.54 999 860 999 880 999 861 23.97 999 871 22.93 999 878 22.93 999 880 25.01 999 861 999 881 999 881 28.65 999 882A 46.31 999 882B 46.31

999 882A & 999 882B

Spoon Stakes:

999 85B Spoon Stake: 999 887 (tea spoon) 20.90

999 85C Spoon Stakes: (dessert spoon) 20.90

999 892* 999 887 Set of 3 Spoon Stakes Tea, Dessert & Table spoon size. 59.99 Cow’s Tongue & Mushroom Stakes: 999 893* 999 892* Cows Tongue Stake B 79.94

999 893* Cows Tongue Stake C 73.92

999 894 Mushroom Stakes: 999 894 small, medium & large set of 3 74.25

Jug Stake: 999 905*

999 905* Jug Stake Large F 81.59

Bottom Stakes:

999 916 Bottom Stake 43.89

* Special order, delivery 28 days.

999 916 TOOLS

order on-line www.cooksongold.com 403 12.04 Tools Metal Forming 3/7/06 4:48 pm Page 404

Mandrels ROUND & OVAL BANGLE MANDRELS

Code Description Price/£

999 804 Round Bangle Mandrels:

999 802 Round Cast Iron Mandrel 25-50mm 26.95

999 803 Round Cast Iron Mandrel 40-70mm 33.44

999 804 Round Cast Iron Mandrel 50-90mm 39.60 999 805 999 805 Round Wooden Bangle Mandrel 40-75mm 420mm Long 19.80

Oval Bangle Mandrel:

999 811 Oval Cast Iron Mandrel - small Approximate size: Top - 35mm x 25mm Base - 55mm x 45mm 54.45

999 812 Oval Cast Iron Mandrel - medium Approximate size: 999 813 Top - 55mm x 45mm Base - 75mm x 65mm 63.53

999 813 Oval Cast Iron Mandrel - large Approximate size: Top - 75mm x 65mm Base - 95mm x 85mm 77.55

999 814 Oval Wooden Bangle Mandrel large 420mm long 19.80 Cast Iron Bust:

999 1017 Cast Iron Bust for shaping neck collars & assembling necklets & chain. Weight 8kg 129.80 Bangle Stretcher:

999 804A A quick way to enlarge round 999 1017 bangles up to 3" in diameter. Not to be used on stone set items. This is an upright mandrel on a cast iron base, with lever handle. 385.00

SILVER D PAGE SHAPE WIRE...... 26

PAGE HAMMERS...... 397

local rate 404 orderline 0845 100 1122 12.04 Tools Metal Forming 3/7/06 4:48 pm Page 405

Collet Forming Tools COLLET PLATES & PUNCHES 999 249

Code Description Price/£ Collet Plates & Punches

999 252 999 249 Round 17° Plate and Punch 6 hole 17.33

999 250 Round 17° Plate and Punch 12 hole 19.09 999 256 999 251 Round 28° Plate and Punch 10 hole 19.91

999 252 Round 28° Plate and Punch 20 hole 5 - 20mm 42.49

999 256 Oval Slim Hole Plate and Punch 11 hole 4 - 14mm 17° 51.70

SPOTLIGHT ON...... 999 257 Oval Wide Hole Plate and Punch COLLET PLATE 11 hole 4 - 14mm 17° 51.70 & PUNCHES 999 262 Square 17° These plates and matching punches are ideal for Plate and Punch 4 - 14mm producing a variety of bezel shapes for both with square corners 41.39 rubover settings and the base for claw settings. 999 89G Square 17° Plate & Punch 4 - 14mm 999 264 with cushioned corner 45.90 999 263 Rectangular 17° Plate and Punch 4 - 14mm with square corner 41.39

999 264 Hexagonal 17° Plate and Punch 999 999 999 999 999 999 4 - 14mm 42.50 266 265 264 263 89G 262

999 265 Pear 17° Plate and Punch 4 -14mm 65.72

Profiles of Shapes 999 266 Emerald Cut 17° Plate & Punch 4 - 14mm with cushion corner 48.13

Claw Making Jig:

999 278 999 278 Claw Making Jig - for making wire collets 40.79 TOOLS

order on-line www.cooksongold.com 405 12.04 Tools Metal Forming 3/7/06 4:48 pm Page 406

Drawplates ROUND DRAWPLATES

Code Description Price/£ Round Drawplates:

999 0266 30.25 Round 20 hole drawplate 0.10 - 0.60mm 999 283 999 0258 28.05 Round 20 hole drawplate 0.40 - 1.0mm

999 283 31.90 Round profile Round 30 hole drawplate 0.5 - 2.0mm

999 286 31.90 Round 30 hole drawplate 0.5 - 3.0mm

999 0291 31.90 Round 30 hole drawplate 1.0 - 3.5mm

999 0276 35.20 Round 30 hole drawplate 2.0 - 5.0mm

999 0275 35.20 Round 30 hole drawplate 5.0 - 8.0mm

999 287 31.90 Round 31 hole drawplate 3.0 - 6.0mm

999 284 42.08 Round 41 hole drawplate 0.5 - 4.0mm

999 0274 75.08 Round 50 hole drawplate 1.0 - 5.0mm

999 CJU 71.50 Round 36 hole Tungsten drawplate 0.26 - 2.2mm

999 288 170.5 Round 36 hole Tungsten drawplate 0.26 - 2.2mm

Looking Drawtongs & Drawbenches? See page 409

local rate 406 orderline 0845 100 1122 12.04 Tools Metal Forming 3/7/06 4:48 pm Page 407

Drawplates SQUARE & ‘D’ SHAPE DRAWPLATES

Code Description Price/£ ‘D’Shape Drawplates:

999 293 43.78 ‘D’ Shape 20 hole drawplate shape 15 1.0 - 3.5mm

999 0281 999 0283 53.35 30 hole drawplate shape 15 2.0 - 6.0mm ‘D’Shape Profiles

999 0281 53.35 30 hole drawplate shape 17 2.0 - 6.0mm

999 293

Square Drawplates:

999 300 44.00 Square 30 hole drawplate 0.5 - 2.0mm

999 0264 44.00 Square 30 hole drawplate 999 300 1.0 - 3.5mm

999 0286 44.00 Square Profile Square 30 hole drawplate 2.0 - 5.0mm 999 302 Square 31 hole drawplate 47.08 3.0 - 6.0mm

Want to know up to the minute GOLD & SILVER prices? visit www.cooksongold.com TOOLS

order on-line www.cooksongold.com 407 12.04 Tools Metal Forming 3/7/06 4:48 pm Page 408

Drawplates ASSORTED SHAPE DRAWPLATES

Code Description Price/£ Oval Drawplates:

999 308 38.50 Oval 20 hole drawplate 1.0 - 3.0mm 999 308 999 0271 53.35 Oval 30 hole drawplate 2.0 - 6.0mm

999 314 Rectangular Drawplates:

999 313 38.50 Rectangular 20 hole drawplate 1.0 - 3.0mm (1 x 0.33 - 3 x 0.99mm)

999 314 47.59 Rectangular 31 hole drawplate 3.0 - 6.0mm (3 x 0.99 - 6 x 1.98mm)

999 320

Assorted Shape Drawplates:

999 320 42.73 Pear shape drawplate 3.0 - 6.0mm (3 x 2.16 - 6 x 4.32mm)

999 321 46.75 999 321 Triangular 31 hole drawplate 3.0 - 6.0mm (3 x 3 - 6 x 6mm)

999 CBV 44.19 Knife edge drawplate 1.0 x 2.1mm - 3.0 x 6.3mm 20 holes

999 CFR 71.50 Multiform drawplate Round 20 hole 1.0 - 3.5mm ‘D’ Shaped 20 hole 1.5 - 3.5mm Square 20 hole 1.0 - 3.5mm 999 CBV

Looking Beeswax & Oils? 999 CFR See page 372

local rate 408 orderline 0845 100 1122 12.04 Tools Metal Forming 3/7/06 4:48 pm Page 409

Drawplates DRAWTONGS & DRAWBENCH

Code Description Price/£ Drawtongs:

999 327 Economy drawtongs 18.70

999 328 Black high quality tongs 31.73

999 328

Durston Drawbench: *Special order 3-4 weeks delivery.

999 0343 Model 1100 Size in mm: 1070Lx560Wx970H Weight: 37kg Working Length: 650mm Max.Wire Diam. 10mm 347.60

999 0342 Model 1400 Size in mm: 1370Lx560Wx970H Weight: 45kg Working Length: 950 mm 999 0342 Max. Wire Diam. 10mm 451.00 TOOLS

order on-line www.cooksongold.com 409 12.04 Tools Metal Forming 3/7/06 4:48 pm Page 410

Rolling Mills MINIMILLS & STANDS

All mills held in stock are combination mills. Code Description Price/£ Single function mills ie. sheet or wire can be ordered Minimills & Stands:

999 AXU 345.00 Minimill - 80mm 62 x 6mm sheet max. Roller is 83mm wide and 45mm in diameter 999 AXU Wire: 4 square grooves/ 3 D'shape Size without handle: 250 x 110 x 250mm Weight: 15kg

999 AXV 370.00 Minimill - 100mm 83 x 6mm sheet max. This roller is the same model as above, but it has a 83mm sheet capacity & 4 D'grooves

999 AXW 152.90 Small stand suitable for all mills

999 AXU Roller Size 80 x 45mm Sheet Thickness 6mm Sheet Width 60mm Wire Capacity 6.5 - 1mm No of wire grooves 4 Gear Ratios Direct Drive Extention Rollers 4 ’D’ Grooves 4,3,2 & 1.5mm Total size of mill (without handle) 250 x 110 x 230mm Nett Weight 15Kg 999 AXW

999 AXV

999 AXV Roller Size 100 x 45mm Sheet Thickness 6mm Sheet Width 80mm Wire Capacity 6.5 - 1mm No of wire grooves 4 Gear Ratios Direct Drive Extention Rollers 4 ’D’ Grooves 4,3,2 & 1.5mm Total size of mill (without handle) 270 x 110 x 230mm Nett Weight 16Kg

Please Note: Information sheets are available on the above Rolling Mills.

local rate 410 orderline 0845 100 1122 12.04 Tools Metal Forming 3/7/06 4:48 pm Page 411

Rolling Mills ROLLING MILLS & STANDS

All mills held in stock are combination mills. Code Description Price/£ Single function mills ie. sheet or wire can be ordered Rolling Mills & Stands:

999 AXX 498.00 999 AXX Rolling Mill - C100 66 x 6.5mm sheet max. Combination roller for plate & wire, with gear reduction of 4:1. The roller is 100mm wide and 50mm in diameter Wire: 4 Square grooves 1-7mm 3 D' shape grooves 2.25-3.75mm 2 Other Size without handle: 280 x 160 x 350mm Weight: 26.5kg

999 HAC C130 597.00 As above but with a 130mm wide roller.

999 HAC1C150 686.00 As above but with a 150mm wide roller.

Please note: the C130 & C150 are supplied as special order. Delivery time 3-4 weeks directly from supplier. 999 AXX Roller Size 100 x 50mm Sheet Thickness 6mm Sheet Width 70mm Wire Capacity 7 - 1mm No of wire grooves 9 Gear Ratios 4 - 1 Extention Rollers 4 ’D’ Grooves 4,3,2 & 1.5mm Total size of mill (without handle) 350 x 200 x 350mm Nett Weight 30Kg

999 HAC & 999 HAC1

999 HAC 999 HAC 1 Roller Size 130 x 60mm Roller Size 150 x 60mm Sheet Thickness 7mm Sheet Thickness 7mm Sheet Width 80mm Sheet Width 100mm Wire Capacity 12 - 1mm Wire Capacity 12 - 1mm No of wire grooves 11 No of wire grooves 11 Gear Ratios 6 - 1 Gear Ratios 6 - 1 Extention Rollers 4 ’D’ Grooves Extention Rollers 4 ’D’ Grooves 4,3,2 & 1.5mm 4,3,2 & 1.5mm Total size of mill (without handle) 375 x 220 x 370mm Total size of mill (without handle) 400 x 220 x 370mm Nett Weight 40Kg Nett Weight 42Kg

Please Note: TOOLS Information sheets are available on the above Rolling Mills.

order on-line www.cooksongold.com 411 12.04 Tools Metal Forming 3/7/06 4:48 pm Page 412

Rolling Mills ROLLING MILLS & STANDS

All mills held in stock are combination mills. Code Description Price/£ Single function mills ie. sheet or wire can be ordered Rolling Mills & Stands:

999 AXY 990.00 Rolling Mill - D2 120

Dual model with two pairs of rollers - for plate and for square wire, with 7:1 reduction gearing for the sheet rollers and 3.5:1 reduction for the wire. The rollers are 120mm wide and 60mm diameter. Maximum thickness for sheet: 7mm Wire Capacity: 15mm - 1mm Dimensions: 360 x 200 x 580mm Weight: 68kg

This D2 mill will be supplied directly from sup- 999 AXY plier. Delivery time 3 - 4 weeks.

999 AXZ 181.50 Rolling Mill Cabinet Stand for the above two mills

999 AXY Roller Size 120 x 60mm Sheet Thickness 7mm Sheet Width 120mm Wire Capacity 15 - 1mm No of wire grooves 19 Gear Ratios 7 - 1 Extention Rollers 4 ’D’ Grooves 4,3,2 & 1.5mm Total size of mill (without handle) 380 x 200 x 580mm Nett Weight 63Kg

999 AXZ

Please Note: Information sheets are available on the above Rolling Mills.

local rate 412 orderline 0845 100 1122 12.04 Tools Metal Forming 3/7/06 4:48 pm Page 413

Ring Stretchers & Sizing Equipment GEM RING STRETCHERS,WEDDING RING STRETCHERS

Code Description Price/£ Gem Ring Stretchers:

999 AHV 79.31 999 AHV Medium Duty Gem Ring Stretcher

999 AHW 107.53 Heavy Duty Gem Ring Stretcher

This enlarger enables stone set rings to be sized. It rolls out the shank without stressing the setting. The set of rollers accommodate most ring widths. Upright Wedding Ring Stretcher & Reducer:

999 AHX 168.30 Upright Wedding Ring Stretcher and reducer This ring sizer enlarges & reduces wedding ring bands. Bands up to 12mm wide can be reduced by compression in one of the 16 countersunk dies.

Please Note: Size marked on machine are approximate only. The machine may sometimes be supplied without size markings.

999 AHX 999 AHX2 38.50 Unmarked spare mandrel for upright ring stretcher. We can also obtain spare mandrels with US and continental markings.

999 AHX3 302.50 Wedding Ring Stretcher This machine comes with 14 parallel dies in place of the conventional tapered spindle. This method ensures parallel sizing without the need to invert the ring. Each die has six segments to minimise the risk of marking. It is also fitted with revolving 999 AHX3 base for reducing plain wedding rings. Ring Size Cutter

999 ST04* NEW! 183.16 Supplied with 7 cutters for removing the following; 1/2, 3/4, 1, 1 1/4, 1 1/2, 1 3/4, and 2 full sizes.

Choose the cutter that equals the amount you want to remove. Adjust the cutter bars and insert the ring, pull the handle to remove the exact amount of shank. The cut is always parallel, which makes soldering fast and neat. The piece of shank removed can be reused to enlarge another NEW! appropiate width shank. * Special Order Looking 999 ST04 Ring Sticks?

See page 367 TOOLS

order on-line www.cooksongold.com 413