Enhanced Combat Helmet

Total Page：16

File Type：pdf, Size：1020Kb

ENHANCED COMBAT HELMET Concept of Distribution: One per Deployer Fielding Status: Fielding began FY-14. IOC reached May 2014. Fielding is estimated to be complete for Overview: The Enhanced Combat Helmet (ECH) exploits Marine Corps 1st Quarter FY-16. the latest lightweight material technology, Ultra-High Molecular Weight Polyethylene (UHMWPE) material to Requirements Document: Urgent Statement of Need provide enhanced ballistic protection, against select small (USON) dated 2 Mar 2009 arms and fragmentation, above what is currently provided by the Lightweight Helmet (LWH)/Advanced Combat Training: A QRG accompanies each helmet and explains Helmet (ACH). This acquisition was led by US Marine with text and drawings how to adjust, wear, and maintain Corps in conjunction with US Army and US Navy. the helmet. An instructional video is available on YouTube at Features: At the direction of the Commandant of the https://www.youtube.com/watch?v=aT20FWVi44c Marine Corps, the ECH takes the shape of the Army’s as well as on the Marine Corps Systems Command ACH for improved field of view, sound localization, and Facebook page. Training may be scheduled with the equipment compatibility. With the latest material Product Manager Infantry Combat Equipment (PdM ICE) technology UHMWPE, there is increased ballistic Training Team (ITT) by contacting PdM ICE at protection against select small arms and fragmentation. [email protected]. Components: The ECH consists of a ballistic shell, Manuals: suspension pads (3/4 or 1 inch thick), and 4-point retention TM 12030A PCN 184 120300 00 system. In addition to the above components, a reversible helmet cover, Night Vision Goggle bracket and attachment Supply/Logistics: hardware will be provided for wear. A Quick Reference TAMCN: C01202E Guide (QRG) is included for instruction on use and care of ID No: 12031A the helmet. NSN: 8470-01-592-6215 Approved Acquisition Objective (AAO): The ECH Manufacturer: 3M/Ceradyne, CA quantity authorized for peacetime and wartime requirements to equip and sustain the force in accordance Contact information: Email: [email protected] with current DoD plans and policies is listed in the table below: UNIT AAO I MEF 27,000 II MEF 28,000 III MEF 22,000 MFR 0 SPT EST 0 TOTAL 77,000 December 2014 .

Copy Link

Recommended publications

Military & Other Medals & Decorations, Badges, Militaria, Swords, Bayonets
Military & other medals & decorations, badges, militaria, swords, bayonets, firearms, other weapons & military collectibles. Friday 16 March 2012 11:00 Thomson, Roddick & Medcalf (Carlisle) Coleridge House Shaddongate Carlisle CA2 5TU Thomson, Roddick & Medcalf (Carlisle) (Military & other medals & decorations, badges, militaria, swords, bayonets, firearms, other weapons & military collectibles.) Catalogue - Downloaded from UKAuctioneers.com Lot: 501 Lot: 511 Medals - first of 58 lots - 1914-15 Trio; to 1175 Pte. B. Bryant. WW I pair; to 60209 A.Cpl. E. Schofield. M.G.C. Midd'x R. With ribbon bar & BiM cap badge. (see next lot) Estimate: £20.00 - £30.00 Estimate: £40.00 - £60.00 Lot: 512 Lot: 502 WW I pair; to 5952 Pte. H.W. Taylor. 16-Lond. R. (6) Medals - second of 58 lots. WW II group. 39-45, Atlantic, Estimate: £25.00 - £40.00 Africa, Italy Stars, War & Defence Medals; to H.C. Bryant. R.N. (son of above) Estimate: £40.00 - £60.00 Lot: 513 Mons Star; to 4909 C.S.M. W. Potts. W.Yorks. R. Estimate: £30.00 - £50.00 Lot: 503 (5) MID. WW II group. 39-45, Africa, France & Germany Stars, War Medal, Territorial E.M.; to 1453385 Sjt. R. Corlett. R.A. Lot: 514 With cloth shoulder title. KSA with S.A. 1901 & 1902 clasps; to 6577 Pte. J. Jones. 3- Estimate: £90.00 - £120.00 K.R.R.C. Estimate: £50.00 - £80.00 Lot: 504 Mons Star Trio with 15th Aug-22nd Nov. 1914 clasp.; to 5925 Lot: 515 Pte. J.E. Harris. 19/Hrs. With ribbon bar & Services Rendered IGSM 1909 with Afghanistan N.W.F.
[Show full text]
Ballistic Helmets – Their Design, Materials, and Performance Against Traumatic Brain Injury
University of Nebraska - Lincoln DigitalCommons@University of Nebraska - Lincoln US Army Research U.S. Department of Defense 2013 Ballistic helmets – Their design, materials, and performance against traumatic brain injury S.G. Kulkarni Texas A&M University, [email protected] X.-L. Gao University of Texas at Dallas, [email protected] S.E. Horner U.S. Army, Fort Belvoir J.Q. Zheng U.S. Army, Fort Belvoir N.V. David Universiti Teknologi MARA Follow this and additional works at: https://digitalcommons.unl.edu/usarmyresearch Kulkarni, S.G.; Gao, X.-L.; Horner, S.E.; Zheng, J.Q.; and David, N.V., "Ballistic helmets – Their design, materials, and performance against traumatic brain injury" (2013). US Army Research. 201. https://digitalcommons.unl.edu/usarmyresearch/201 This Article is brought to you for free and open access by the U.S. Department of Defense at DigitalCommons@University of Nebraska - Lincoln. It has been accepted for inclusion in US Army Research by an authorized administrator of DigitalCommons@University of Nebraska - Lincoln. Composite Structures 101 (2013) 313–331 Contents lists available at SciVerse ScienceDirect Composite Structures journal homepage: www.elsevier.com/locate/compstruct Review Ballistic helmets – Their design, materials, and performance against traumatic brain injury ⇑ S.G. Kulkarni a, X.-L. Gao b, , S.E. Horner c, J.Q. Zheng c, N.V. David d a Department of Mechanical Engineering, Texas A&M University, College Station, TX 77843, United States b Department of Mechanical Engineering, University of Texas at Dallas, 800 West Campbell Road, Richardson, TX 75080-3021, United States c Program Executive Ofﬁce – SOLDIER, U.S.
[Show full text]
Advanced Combat Helmet Technical Assessment
Report No. DODIG-2013-079 Department of Defense InspectorMAY 29, 2013 General Advanced Combat Helmet Technical Assessment INTEGRITY EFFICIENCY ACCOUNTABILITY EXCELLENCE INTEGRITY EFFICIENCY ACCOUNTABILITY EXCELLENCE Mission Our mission is to provide independent, relevant, and timely oversight of the Department of Defense that: supports the warfighter; promotes accountability, integrity, and efficiency; advises the Secretary of Defense and Congress; and informs the public. Vision Our vision is to be a model oversight organization in the federal government by leading change, speaking truth, and promoting excellence; a diverse organization, working together as one professional team, recognized as leaders in our field. Fraud, Waste and Abuse HOTLINE 1.800.424.9098 • www.dodig.mil/hotline For more information about whistleblower protection, please see the inside back cover. Advanced Combat Helmet Technical Assessment Results in Brief May 29, 2013 Findings Continued Objective Procedures and Tables for Inspection by Attributes). In selecting the LAT RTP requirement of 4 percent AQL, Our objective was to assess the methods and technical DOT&E considered the government risk of accepting rationale in developing the Advanced Combat Helmet underperforming helmets, manufacturer risk of failing (ACH) testing protocols issued by the Office of the LAT with acceptable helmets, and historical LAT data. Director, Operational Test and Evaluation (DOT&E) to However, DOT&E did not consider selecting an AQL that determine whether the test protocols are appropriate was based on the safety criticality of the helmet. for the ACH. Specifically, our assessment focused on the First Article Testing (FAT) Resistance to Penetration C. In accordance with authorizing statutes, DOT&E has (RTP) requirement of at least 90 percent Probability the authority to establish test standards for personnel of no Penetration (P(nP)) with 90 percent Confidence protective equipment such as the ACH.
[Show full text]
Ffi-Rapport 16/02314
FFI-RAPPORT 16/02314 Influence of helmet on blast propagation into the brain literature survey - Jan Arild Teland Influence of helmet on blast propagation into the brain literature survey Jan Arild Teland Norwegian Defence Research Establishment (FFI) 19 December 2016 FFI-RAPPORT 16/02314 1 Keywords Hjelmer Sjokkbølger Hjerneskader FFI-rapport FFI-RAPPORT 16/02314 Project number 1325 ISBN P: ISBN 978-82-464-2846-8 E: ISBN 978-82-464-2847-5 Approved by Morten Huseby, Research Manager Jon Skjervold, Director 2 FFI-RAPPORT 16/02314 Summary It has been known for a long time that blast waves can cause brain damage to military personnel. However, only recently questions have been asked about how helmet use can influence the shock wave propagation into the brain. In this report we review the research that has been performed on this topic. This research has mostly been of experimental and numerical character. In any case, the results are very clear. Assuming that the helmet is padded so that shock waves can not freely propagate into the space between skull and helmet, it is beneficial for soldiers to use helmets. This will lead to a reduction of the pressure amplitude inside the brain, as well as having the advantage of also protecting against other threats. FFI-RAPPORT 16/02314 3 Sammendrag Det har vært velkjent i lengre tid at sjokkbølger fra eksplosjoner kan forårsake hjerneskade hos militært personell. Imidlertid er det først relativt nylig at det har blitt stilt spørsmål ved om bruk av hjelm kan ha en dempende eller eventuelt forsterkende effekt på trykkforplantningen inn i hjernen.
[Show full text]
Hełmy Oraz Okulary I Gogle Ochronne
www.special-ops.pl OD REDAKCJI PARTNERZY PUBLIKACJI ostatnich latach indywidualne osłony balistyczne rozpowszechniły się na tyle, że trudno sobie wyobrazić Wnowoczesną armię z żołnierzami ich pozbawionymi. Rozwój technologii sprawił, że stały się one lżejsze i bardziej wytrzymałe, niż na początku swojego istnienia, a także pozwolił na skonstruowanie osłon organów dotąd trudnych do osłonięcia, jak np. oczy. Współczesny konflikt zbrojny nierozerwalnie wiąże się ze stosowa- niem indywidualnych osłon balistycznych, które wydatnie zmniejszają odsetek zabitych i rannych żołnierzy, choć nie chronią przed każdym zagrożeniem na polu walki. Producenci wdrażają do produkcji coraz nowocześniejsze, lżejsze i skuteczniejsze osłony, a z drugiej strony – konstruowana jest amunicja o coraz większej zdolności raże- nia, w tym przebijania osłon. Wyścig miecza i tarczy, trwający od wieków, trwa nadal... W niniejszej publikacji postaramy się przybliżyć Czytelnikom problematykę związaną z indywidualnymi osłonami balistycznymi, takimi jak kamizelki zintegrowane, plate carriery, hełmy oraz okulary i gogle ochronne. Zaprezen- tujemy też kilka wybranych modeli reprezentatywnych dla poszczególnych grup. Nie jest to oczywiście wyczer- panie tematu – jest on tak obszerny, że materiału starczyłoby na kilka książek – ma ona przybliżyć Czytelnikom podstawowe zagadnienia związane z osłonami balistycznymi, jak choćby normy wytrzymałości, będące kluczo- wym parametrem przy dobieraniu osłon. SPIS TREŚCI REDAKCJA SPECIAL OPS Redakcja CZĘŚĆ . Magazyn Ludzi Akcji Michał Sitarski Adres redakcji [email protected] ul. Karczewska 18 Reklama hełmy - wstęp 4 04-112 Warszawa tel. 22 810 65 61 Agnieszka Szwed ops-core fast ballistic high cut 4 faks 22 810 27 42 [email protected] [email protected] Grafika hełm airframe 8 www.special-ops.pl hełm HBK Marcin Jarosz lekki hełm batlskin viper p revision military 5 Grupa MEDIUM Spółka z ograniczoną odpowiedzialnością S.K.A.
[Show full text]
Military Advanced Combat Helmet MACH 1 + Ops-Core
Military Advanced Combat Helmet MACH 3 + Ops-Core The MACH range is aimed at the Military and Police special tactical units and close protection teams, Intelligent Armour have upgraded our standard Military Advanced Combat Helmet MACH 3 and added Ops- Core 2010 ACH-ARC Kit & Ops-Core VAS Shroud to enhance compatibility with all NVG and communication systems. The Military Advanced Combat Helmet MACH 3 + Ops- Core has been developed to aid overall movement, the MACH 3 Helmet is ideal for vehicle crews and for Special Forces. MACH 3, Lightweight Ballistic Crew Helmet The Military Advanced Combat Helmet MACH 3 only weighs 1060g in size large, this is a great reduction in overall weight compared to other ballistic crew helmets at NIJ IIIA protection. The MACH Range of Ballistic Helmets This new range of helmets are based on the original PASGT design being reduced in size to produce the MACH I, II & III styles of helmet. The three different styles produce three distinctly Ballistic Helmets which can be selected according to the end users specific needs and operational requirements. Improved harness system with six points of adjustment The new improved harness system secured with only four bolts to ensure maximum ballistic integrity. The MACH 3 Ballistic Helmet head harness is fully adjustable and includes leather covered front padding, nylon covered rear padding and a net mesh crown pad retainer. Our harness retention system allows for six points of adjustment on the harness and two inside the edges of the combat helmet to adjust further for a more comfortable head fit.
[Show full text]
Investigation of Primary Blast Injury and Protection Using Sagittal and Transverse Finite Element Head Models
Investigation of Primary Blast Injury and Protection using Sagittal and Transverse Finite Element Head Models by: Dilaver Singh A thesis presented to the University of Waterloo in fulfillment of the thesis requirement for the degree of Master of Applied Science in Mechanical Engineering Waterloo, Ontario, Canada, 2015 © Dilaver Singh 2015 Author’s Declaration I hereby declare that I am the sole author of this thesis. This is a true copy of the thesis, including any required final revisions, as accepted by my examiners I understand that my thesis may be made electronically available to the public. ii Abstract The prevalence of blast related mild traumatic brain injury (mTBI) in recent military conflicts, attributed in part to an increased exposure to improvised explosive devices (IEDs), requires further understanding to develop methods to mitigate the effects of primary blast exposure. Although general blast injury has been studied extensively since the 1950’s, many aspects of mTBI remain unclear, including specific injury mechanisms and injury criteria. The purpose of this work was to develop finite element models to investigate primary blast injury to the head in the loading regimes relevant to mTBI, to use the models to determine the response of the brain tissue, and ultimately to investigate the effectiveness of helmets on response mitigation. Since blast is inherently a wave dominated phenomena, finite element models require relatively small elements to resolve complex pressure wave transmission and reflections in order to accurately predict tissue response. Furthermore, mesh continuity between the tissue structures is necessary to ensure accurate wave transmission. The computational limitations present in analyzing a full three dimensional blast head model led to the development of sagittal and transverse planar models, which provide a fully coupled analysis with the required mesh resolution while remaining computationally feasible.
[Show full text]
Hybridized Thermoplastic Aramids: Enabling Material Technology for Future Force Headgear
HYBRIDIZED THERMOPLASTIC ARAMIDS: ENABLING MATERIAL TECHNOLOGY FOR FUTURE FORCE HEADGEAR S.M. Walsh*, B.R. Scott, D.M. Spagnuolo, and J.P. Wolbert U.S. Army Research Laboratory Weapons & Materials Research Directorate Aberdeen Proving Ground, Maryland, 21005-5069 ABSTRACT uses improved strength (Riewald et al., 1991; Yang, 1993) aramid fibers (Kevlar K129, KM2 and Twaron are U.S. Army ballistic helmet manufacturing has not all higher performance para aramids), but still uses changed significantly in nearly 30 years. Advances in thermoset phenolic matrix materials and molding U.S. helmet technology have been largely in shell design, processes that are more than 60 years old. improved aramid fibers, and helmet liner and suspension systems. The Army is currently replacing its first There are new helmet efforts on the horizon, as well as composite ballistic helmet, Personnel Armor System opportunities to introduce materials and process Ground Troops (PASGT), with the Advanced Combat improvements to the current ACH helmet. The Future Helmet (ACH). ACH has undergone ballistic testing and Force Warrior (FFW) Program, for example, demands a system analysis with improvements to weapons and body helmet that is lighter than the current ACH helmet system. armor interfacing issues. Still, ACH uses some of the FFW is the precursor to the Ground Soldier System same materials (butyl rubber toughened phenolic resin (GSS). FFW weight reduction requirements are driven with aramid fabric reinforcements) and the same process largely by the desire to accommodate head-borne technology as its 30 year old PASGT predecessor. The electronic devices without exceeding a total headgear current research effort has focused on identifying and weight of about 5.5 lbs.
[Show full text]
Public Auction
PPuubblliicc AAuuccttiioonn 228899 FFrriiddaayy,, 2200th JJuullyy 22001122 will be held on Level 3, Status International House, 262 Castlereagh Street, Sydney MEDALS & MILITARIA Lots 10001 – 12497, commencing at 12:00 noon Viewing at Status International premises: 262 Castlereagh Street, Sydney Monday - Wednesday 16th – 18th July 2011 9.00am – 4.45 pm Thursday 19th July 2011 9.00 am - 12:00 noon Friday 20th July 2011 9.00 am - 12.00 noon Limited viewing on Thursday & Friday (auction days), preference will be given to clients from outside Sydney. Proprietor: Militaria Describers: IT Administrator: Stewart Wright Paddy O’Brien Frank Zheng Ben Smith Business Manager: Stewart Wright Catalogue Production: Robert Morello Tseng Chiung-yao Office Administrator: Auctioneer: Despatch/Shipping: Sabine Wincote Mervyn Baily John Webber Carl Veen Status International : PO Box A2176, Sydney South, NSW 1235. AUSTRALIA : +61 (0)2 9267 4525 FAX: +61 (0)2 9267 6124 Email : [email protected] web: www.statusint.com The I S Wright Group I S Wright I S Wright I S Wright I S Wright Shop 23 Adelaide Arcade 208 Sturt St 241 Lonsdale St 262 Castlereagh St Rundle Mall BALLARAT MELBOURNE SYDNEY ADELAIDE, SA 5000 VIC 3350 VIC 3000 NSW 2000 Ph: 08 8223 7603 Ph: 03 5332 3856 Ph: 03 9650 2345 Ph: 02 9264 7555 Fax: 08 8223-2129 Fax: 03 5331-6426 Fax: 03 9654 8825 Fax: 02 9264 2656 Grant Morton Ben Smith David Carr Paddy O’Brien [email protected] [email protected] [email protected] [email protected] IMPORTANT NOTICES ROOM BIDDERS: Please note the venue for this auction is Level 3, Status International House, 262 Castlereagh St, Sydney Most lots in this auction are sold on behalf of private vendors & as such are exempt from GST.
[Show full text]
Characterization and Modification of Helmet Padding System to Improve Shockwave Dissipation Katelyn Howay Clemson University, [email protected]
Clemson University TigerPrints All Theses Theses 5-2010 Characterization and Modification of Helmet Padding System to Improve Shockwave Dissipation Katelyn Howay Clemson University, [email protected] Follow this and additional works at: https://tigerprints.clemson.edu/all_theses Part of the Materials Science and Engineering Commons Recommended Citation Howay, Katelyn, "Characterization and Modification of Helmet Padding System to Improve Shockwave Dissipation" (2010). All Theses. 849. https://tigerprints.clemson.edu/all_theses/849 This Thesis is brought to you for free and open access by the Theses at TigerPrints. It has been accepted for inclusion in All Theses by an authorized administrator of TigerPrints. For more information, please contact [email protected]. CHARACTERIZATION AND MODIFICATION OF HELMET PADDING SYSTEM TO IMPROVE SHOCKWAVE DISSIPATION A Thesis Presented to the Graduate School of Clemson University In Partial Fulfillment of the Requirements of the Degree Master of Science Polymer and Fiber Science by Katelyn Breanne Howay May 2010 Accepted by: Dr. Philip Brown, Committee Chair Dr. Vincent Blouin Dr. Christine Cole ABSTRACT Currently soldiers are being exposed a much higher number of improvised explosive devices (IEDs) and the resulting shockwaves. These shockwaves can cause traumatic brain injuries (TBIs) even without the occurrence of ballistic impact. The focus of this research was to reduce the amount of shockwaves soldiers are exposed to by inserting fibers and woven fabrics into a foam padding system. These fibers and fabrics facilitate the dissipation of the shockwave energy before it is able to penetrate the padding and cause TBIs. The sound velocity of high-performance fibers, commodity fibers and woven fabric was measured using a Dynamic Modulus Tester.
[Show full text]
RAF Stories: Headgear
LARGE PRINT GUIDE Please return to the box for other visitors. RAF Stories: Headgear Labels start at the top left of the display wall. Founding partner RAF Stories: Headgear The headdresses displayed here represent a snapshot of those worn by members of the Royal Air Force and its associated organisations over the first 100 years of its history. They can have a practical purpose, protecting the wearer from physical or environmental threats and they can also identify and define the organisation, status, role and even religion of the wearer. In the RAF a head covering is worn at all times apart from when indoors and in aircraft operating areas. A headdress is also always worn when saluting. Officer’s Service Dress Cap 1954 Pattern An officer’s Service Dress cap of 2018 is very similar to the cap introduced with the blue grey uniform in the closing months of 1919. This 1954 Pattern cap displays the St Edward’s Crown which marked the coronation of Queen Elizabeth II the year before. 77/U/1413 5 Other Ranks’ Field Service Cap 1943 Pattern As an economy measure in 1943, black plastic buttons and badges replaced the brass examples previously found on the 1936 Pattern cap. 77/U/870 6 Princess Mary’s RAF Nursing Service, Service Dress Hat 1950s In the 1950s, in tropical countries, the blue grey service dress and black hat of the Princess Mary’s RAF Nursing Service was replaced with an all-white uniform including a white felt hat. 68/U/634 7 Other Ranks’ Service Dress Cap 1996 Pattern In 1996 the Other Ranks uniform underwent a number of subtle changes which included the replacement of the metal cap badge with an embroidered version.
[Show full text]
2015 Ops-Core Catalog.Pdf
® PRODUCT CATALOG SCALABLE HELMET SYSTEMS AND COMPONENTS Advanced Head Protection and Situational Awareness for the Elite Warrior PROTECTING THE ELITE WARRIOR TRUE SYSTEM LEVEL PERFORMANCE Designed to seamlessly integrate, our comprehensive suite of scalable head protection helmet systems and components provide the warfighter with true system level performance. We continually strive to advance performance and protection capabilities of both new products and existing battle proven designs. And, we’re dedicated to getting these products in the hands of the warfighter as quickly and easily as possible. From fielding the lightest integrated helmets in the world to providing holistic headborne systems, our focus and dedication remains the same— protecting the elite warrior. INTEGRATED OPEN COMPREHENSIVE INNOVATIVE MODULAR DESIGN ARCHITECTURE CAPABILITIES PRODUCTS » Ops-Core® continues its tradition of enabling the » To provide maximum flexibility and forward » Today’s warfighter is faced with a diverse and » Our expert design team collaborates with end- user to concentrate on their operations by offering compatibility, our helmets are designed to easily ever changing set of mission requirements to be users to deliver high quality solutions that often helmet systems with performance enhancing integrate and work with both Ops-Core and carried out in some of the harshest environments exceed expectations and program requirements. components that can be assembled quickly other third party components. No longer is the on earth. This requires their equipment to be We use each development opportunity to set a and easily. In order for different combinations soldier limited to one company’s solutions or a equally advanced and capable of providing new bar that pushes performance limits to the of components to work together and achieve particular set of equipment.
[Show full text]