DOCSLIB.ORG

Laser Marking Application

Total Page：16

File Type：pdf, Size：1020Kb

Download full-text PDF Read full-text
Laser Marking Application Laser Marking This is latest generation Laser marking system. It adopts the most advanced fiber laser and high-speed scanning galvanometer system in the world. Fiber laser marker uses air cooling. It has an overall small size, excellent beam quality, high reliability, long service life and maintenance free. This machine can be used in many fields with high requirements for deep marking with smoothness and fineness. Application It can be used for marking of translucent Plastic buttons, IC chips, Digital product Components, Precision machinery, Jewelry, Sanitary ware, Measuring and Cutting tools, Clocks and Eyeglasses, Electrical appliances, Electronic components, Hardware accessories, Hardware tools, Mobile communications components, Automobile and Motorcycle parts, Plastic products, Medical equipment, Building materials, Pipes and other High- precision products. Model Laser Marking Series Laser Source IPG Germany, Raycus/Max Photonics China Galvo Scanner Technology Sino – Galvo 2 2 2 Marking areas (selectable via SW) Area – 110x110 mm Optional Marking Area 200x200mm - 300x300mm Output Power 20W/30W/50W/100W Laser wavelength 1064nm 2 Beam Quality M <1.2 Laser Q switch Frequency 1 KHz – 400 Khz Engraving Depth ~ 2mm Machine Power Consumption 500W Minimum Line Weight 0.01mm Repetition Accuracy +/- 0.01mm Cooling System Air cooled Dimensions 560mmX470mmX650mm Power Requirement Single Phase AC220V Size of Host System 150mmX110mmX160mm Sample Pictures: Equipment Introduction: Laser Cutting and Engraving Machine is specially designed for Non Metal Processing. This Innovative Machine is apt for industrial and professional users. The plotter based cutting head is the best for cutting Acrylic, MDF for Signage Industry as well as Paper, Leather, Textile, Veneer and some of the Plastics. This is equipped with glass laser tube which has a very good control on laser beam resulting in best cutting quality. Laser cutting machine can fast cut 2mm small circles without deformation in acrylic. Technical Parameters: Laser Power 40W/80W/100W/150W/220W Processing area 500x700/900x600/1300x900/1600x1000/2500x1300 mm Max Running Speed 40/min Power Supply 0.1mm/m X/Y Location Precision AC220V±10% 50HZ X/Y Repeated Location Precision ±0.1mm Machine Gross Power ≤1250W Running Temperature 0°C-40°C Blowing System Lower Blowing System Formats CDR, BMP, PLT, JPEG, DXF, DST Applied Materials Acrylic, LGP, MDF, Plywood, Advertisement and Decoration Laser Jewelry Welding – Spot welding Equipment Introduction: Jewelry laser welding machine have very very fast developing speed recently years. Nearly all jewelry company have one even several sets laser welding machine in their workshop. With laser welding machine, we can weld jag than inlay diamond. also we can weld some small chain and many different jewelry product. Technical Parameters: Model SW-150 SW-200 Laser Type YAG Lamp pump pulsed YAG Lamp pump pulsed Max. output power 150W 200W Max. Pulse Energy 100J 120J Peak Power 6 KW 7 KW Pulse duration 0.1 -20ms 0.1 -20ms Pulse Frequency 0.1 – 100hz 0.1 – 100hz Focal diameter 0.1 – 2.0mm 0.1 – 2.0mm Cooling system Water cooling Water cooling Vision System 10x stereo microscope 10x stereo microscope Power supply AC 220V/ 50HZ AC 220V/ 50HZ Machine size 900x600x1100mm 900x600x1100mm Net weight 150Kg (After packing) 150Kg (After packing) Denim/Wood Laser Engraving machine Equipment Introduction: Co2 RF Laser Marking machine is integrated advanced Galvo laser marking technology with imported RF excited sealed CO2 laser and high speed optical scanners which has ensured it work continuously and stablely within long time work. Co2 RF laser marking machine is a kind of gas laser device, with large power and high E/O slow rate. The laser wavelength is 10.64μm, which belong to intermediate infrared. The accuracy of its marking on the surface of the work piece can be maximally ensured through the non-contact processing. Model Co2 Laser Marking Machine Laser Wavelength 1064nm Laser Power RECI W-2/95W Marking Area 300*300mm/600*600mm Marking Depth 0.05 ~ 1.2mm Marking speed ≤7000mm/s Min. Letter: 0.2mm (0.008") Cooling Method Water cooling chiller CW-5000 Denim/Wood Laser Engraving machine .
Load more

Recommended publications
  • Radius Manual
    500 Corporate Circle - Suite L Golden, CO 80401 Phone (303) 277-1188 Fax (303) 277-9669 Owner's Manual for EPILOG Radius Model 4000 Revision E, December 1998 Table Of Contents Title Page No. SECTION 1: GETTING STARTED.......................................................................... 5 UNPACKING YOUR MACHINE ........................................................................................... 5 CONNECTING POWER AND CONNECTING THE COMPUTER .................................. 5 CONNECTING THE EXHAUST ............................................................................................ 7 CONFIGURE YOUR COMPUTER ........................................................................................ 8 INSTALLING THE EPILOG RADIUS PRINT DRIVER .................................................................... 8 SECTION 2: SAFETY ............................................................................................. 10 LASER SAFETY ..................................................................................................................... 10 ELECTRICAL SAFETY. ....................................................................................................... 11 FIRE SAFETY. ........................................................................................................................ 11 SAFETY FEATURES AND REGULATORY COMPLIANCE.......................................... 12 SECTION 3: USING THE EPILOG RADIUS PRINT DRIVER .......................... 15 RESOLUTION........................................................................................................................
    [Show full text]
  • Fabication and Analysis of Cnc Laser Engraving on Different Materials
    © 2019 JETIR May 2019, Volume 6, Issue 5 www.jetir.org (ISSN-2349-5162) FABICATION AND ANALYSIS OF CNC LASER ENGRAVING ON DIFFERENT MATERIALS Sridutt H R1, Sachin M2, Pramod M3, Surendra M4, Bhaskar B Katti5, Chakrasali Chandrakumar6, 1,2,3,4 B E Students, Department of Mechanical Engineering, Proudhadevaraya Institute of Technology, Hosapete, 5, 6, Assistant Professor, Department of Mechanical Engineering, Proudhadevaraya Institute of Technology, Hosapete high power density results in fast heating, melting and fractional or complete vaporizing of the material. ABSTRACT There are mainly three types of laser machines: i) The CO2 laser which is best for cutting, boring, and Engraving is special art of carving of design on harden engraving, ii) The neodymium (Nd) and surface. It is advance and recent technology which uses the neodymium yttrium-aluminium-garnet (Nd:YAG) lasers. laser to imprint shapes and designs on materials what you The Nd:YAG laser is used for boring and engraving where needed to engrave. Basically it used for industrial very high power is needed. For welding operation CO2 and Nd/Nd: YAG laser both can be used [1]. In addition other applications like in schools, small scale business and micro jet laser is a water-jet guided laser is used to perform hobbyists. Laser engraver works on directing the High laser cutting functions while using the water jet to guide the Power Laser beam through optic on materials. In laser laser beam, through total internal reflection. The main engrave method two ways one is by cutting material and advantages of this type laser are that the water also removes other is without cutting by simply changing the color.
    [Show full text]
  • OSI Newsletter
    View this email in your browser Welcome to ePulse: Laser Measurement News, a review of new developments in laser beam measurements, beam diagnoscs, and beam profiling. Each issue contains industry news, product informaon, and technical ps to help you solve challenging laser measurement and spectral Subscribe analysis requirements. Please forward to interested colleagues or have them subscribe. Don't forget to see all our new product demos at SPIE Photonics West, Booth 1400, San Francisco, CA, Jan. 31 ‐ Feb. 2, 2017. By Mark S. Szorik, Pacific Northwest Regional Sales Manager, Ophir Photonics By Mark S. Szorik, Pacific Northwest Regional One of the most common Sales Manager, Ophir Photonics quesons I am asked is, "Why do I A laser profiling system can need a beam profiler and what characterize and idenfy which tools and methods do I need to variables affect product quality profile my beam?" All industries and waste. But many laser users require specialized tools to be have never evaluated the quality efficient and effecve. The laser of the beam beyond the inial industry is no different, having delivery. This leads to frequent evolved from wooden blocks, process adjustments to try to get burn paper, and photographic film back to "normal" and franc calls to powerful digital tools. Here are to outside laser services. Wouldn't the quesons you need to ask to it be beer to avoid these find the right profiling tools. problems and added expenses? Laser Profiling Laser Characterization Find out how others have put laser By Roei Yiah, Industrial Product Manager; measurement to work in their Moshe Danziger, Applicaon Engineer, and applicaons, from quality control to Shmulik Barzilay, Internaonal Sales Manager, Opmet (Ophir Photonics) medical devices to industrial materials processing.
    [Show full text]
  • Laser Engraving Tips and Tricks for Glassware
    Laser Engraving Tips and Tricks for Glassware By Mike Dean, vice-president of sales and marketing, Epilog Laser Engraving on glass and crystal can produce stunning results. From engraving the names of the bride and groom on wedding champagne flutes to etching a company logo on a set of beer mugs and beyond, glass etching and engraving creates a sense of sophistication and beauty that is very popular among consumers. CO2 laser engraving equipment generally offers a quicker and more convenient alternative to traditional glass engraving techniques, such as sandblasting, which necessitates the creation of a template prior to starting the project. While engraved and etched glassware is in huge demand, depending on the type and lead content, glass is typically a very delicate material to work with. But don’t let the delicacy of the material dissuade you from glass engraving and etching – just keep the following tips and tricks in mind when working with glass and crystal and you’ll produce the results that keep customers coming back for more. Glassware Options First, you might find it easier to work with “everyday” glassware as opposed to crystal. Crystal contains a greater amount of lead, which retains heat very well (too well for a laser!). When you use a CO2 laser to engrave glass, the surface is heated as the laser beam blasts away delicate glass particles. If the glass is unable to cool down adequately, as is sometimes the case with crystal, the markings expand in size, which can produce a distorted look. Avoid a Second Pass Prior to running any glass engraving job, it's very important to test your speed and power settings on the type of glass you'll be using.
    [Show full text]
  • Acrylic-Processing-Guide.Pdf
    Laser Processing Guide working with acrylic www.troteclaser.com www.trotec-materials.com Acrylic is becoming an increasingly popular manufacturing material used across many industries for a wide range of products such as signs, displays and trophies, to name a few. It is highly versatile, durable, aesthetically pleasing, and processes well with a laser. For many, acrylic is a convenient and affordable alternative to glass because it’s largely impact-resistant and weighs about half as much, but still offers a high level of clarity. A laser is a highly effective and efficient way to cut, mark or engrave acrylic. Including general processing instructions and pointers, time-saving tricks and troubleshooting advice, the following guide was designed to help new laser users as well as intermediate users improve their acrylic processing technique and results. With a little practice and a few pointers, you will be able to use your laser to create perfectly polished acrylic edges, engrave intricate details, and produce precise cuts and contours. Getting 01 Started Engraving Processing Techniques and 02 Recommended Settings Cutting Processing Techniques and 03 Recommended Settings Common 05 Mistakes Trouble 06 Shooting Getting Started Acrylic materials come in a wide range of color, texture, and finish combinations. There are three main types of acrylic: Cell Cast Acrylic that is cast into shapes • Laser engraving appears frosted • Laser cutting easy Continuous Cast Acrylic that is continuously casted into sheets using a sheet shape molded on an assembly line • Laser engraving appears frosted • Laser cutting easy Extruded • Laser engraving is translucent, making it difficult to see • Can be easily cut with a laser using lower power settings.
    [Show full text]
  • Techniques in Laser Cutting and Engraving Leather
    Where the Laser Meets the Leather: Techniques in Laser Cutting and Engraving Leather SARAH PIKE If you had ever told me that, as an artist trained in traditional figurative painting who works in stone lithography, I would end up running a laser cutting business, I wouldn't have believed you. But it was through my printmaking discipline and sensibilities that I came to work with laser cutting. And today I draw great satisfaction in helping artists—primarily bookbinders—bridge the gap between handcraft and new technologies. In this article I will share a variety of laser cutting and engraving techniques for working with leather and parchment. A Look at What's Possible Laser cutters, which vaporize material using a pulsating That said, the question I most often get is, “Can you cut beam of light, perform three main tasks: they cut, line metal?” The answer is no: a fiber laser is needed for engrave, and area engrave. When the laser cuts or line laser cutting metal. Due to their size and cost, fiber engraves, it follows the path of the line; when it area lasers are more often found at businesses that service engraves it moves back and forth like an ink-jet printer. industrial companies. Note that in this context, engraving refers to the partial removal of material that can be performed at multiple While I'll try to be as specific as possible, so many depths (fig. 1). variables come into play that it's difficult to give universal guidelines. Laser cutter settings can vary greatly depending on how the leather was processed, the dye used, what part of the skin is being used, and the life of the animal.
    [Show full text]
  • Handbook for Engravers
    marking cutting engraving Handbook for Engravers www.troteclaser.com Tips & Tricks for working with the laser marking cutting engraving Contents 3 Introduction 26 Other tips and tricks 3 What can a laser do? 26 Computer hardware 4 Laser sources and available options 26 Select the correct focus lens 4 CO2 and fiber lasers 28 Exhaust system 4 flexx function 29 The correct throttle setting for your 5 From concept to finished workpiece application 6 How does the laser work? 30 The Trotec table concept - the right 6 Process: Vector interface table for every application 6 Process: Raster engraving 32 JobControl® 8 How to create a file for the laser 32 Material database 8 Import Trotec color palette 32 Exporting a parameter file 34 Importing a parameter file 9 Materials 36 Password protected materials 10 Overview of materials for laser processing 36 JobControl® functions, which make laser 12 Acrylic and plexiglass® processing even easier 12 Delrin 37 How do I find the perfect laser parameters? 13 Delrin 37 Engraving 14 Natural rubber 38 Cutting 16 Wood 17 Plastics 39 Shortcuts – key combinations 18 Laminates 39 JobControl® 19 Leather 40 CorelDraw® 20 Metal 40 Align and arrange objects 21 Paper & cardboard 40 Text 23 Stone 40 F-keys 24 Textiles 41 Finishing 41 Lens cleaning 42 General cleaning Handbook for engravers Contents 2 marking cutting engraving Introduction What can a laser do? With an advanced laser engraver, you can process a variety of different materials. Wood, glass, leather, acrylic, natural rubber or stone are just a few of the wide range of materials used in applica- tions, such as signs, stamps, promotional items and many more.
    [Show full text]
  • Study and Development of a Didactic Engraving System Using a Low Powered Laser Diode
    Study and development of a didactic engraving system using a low powered laser diode António Jorge Reis Lordelo Paulos Dissertation Supervisors: Prof. Manuel Rodrigues Quintas Eng.º Jorge Manuel de Matos Reis Engineering Faculty of the University of Porto Master’s Degree in Mechanical Engineering September 2014 Study and development of a didactic engraving system using a low powered laser diode ii Study and development of a didactic engraving system using a low powered laser diode Abstract Laser engravers may be used in a didactic environment for the augmentation of certain activities. Whether it is for training involving motion control systems or for use as a tool in the context of other disciplines, a laser engraving and/or cutting machine is desired. Thus, the present dissertation reports about the study and development of such a system. The main objective is to develop a laser engraving system for didactic purposes. The engraver is meant to use a low powered diode laser device for engraving and/or cutting soft materials. Firstly, a preliminary study of diode laser fundamentals, as well as laser engraving and cutting technologies, was carried out. This allowed acquiring basic knowledge about the device to be used and which sort of configurations are most common for the axes of motion of laser engraving and cutting machines. Furthermore, it served as a basis for the definition of a concept for a working prototype. As such, the project specification ensued to establish the requirements and characteristics to meet in the development of the prototype. Safety, usability and maintenance issues were considered and the technical aspects that may characterise the prototype were addressed.
    [Show full text]
  • Lasercuttingenamel Article
    Erin Turner1, Matthew Carl2, Marcus L. Young2, and James Thurman1 1College of Visual Arts and Design, University of North Texas, Denton, Texas 2Department of Materials Science and Engineering, University of North Texas, Denton, Texas Snag Technical Article Laser Engraved Enamel Many of my pieces involve enameling as a surface treatment for color and texture; however incorporating fine lines often involves delicate Cloisonne, Sgraffito or a myriad of other techniques that never quite fit with my needs. That is until I discovered Arthur Hash’s beautiful enameled brooches, which involved a laser cutter and Adobe Illustrator. The laser, guided by the drawing in Illustrator, is able to burn a crisp line across the surface of the enamel with high heat, essentially over firing it similar to leaving a piece in the kiln for too long. In order to get started with this technique you must have an understanding of some principles. Ross Kowalski has already started us on the path to lasers with his SNAG technical article “A Laser in your Studio” . Please consult his article for more in depth information of laser cutter use. Safety ● The laser cutter burns at a high temperature and can cause great damage to you and the machine if you are not familiar with its use. Please consult the manual for more information. ● Laser cutting glass is tricky. You need to lay 1-2 WET paper towels over the surface of the glass in order to keep the laser from bouncing back and damaging the machine. This is very important. ○ If the paper towel is not touching the surface in all areas it may affect the line that it cuts causing a blurred line.
    [Show full text]
  • Optimization and Characterization of a Laser Engraving System for Carbon-Based
    Optimization and Characterization of a Laser Engraving System for Carbon-Based Electronic Devices A thesis presented to the faculty of the Russ College of Engineering and Technology of Ohio University In partial fulfillment of the requirements for the degree Master of Science Tianyi Cai May 2019 © 2019 Tianyi Cai. All Rights Reserved. 2 This thesis titled Optimization and Characterization of a Laser Engraving System for Carbon-Based Electronic Devices by TIANYI CAI has been approved for the School of Electrical Engineering and Computer Science and the Russ College of Engineering and Technology by Savas Kaya Professor of Electrical Engineering and Computer Science Dennis Irwin Dean, Russ College of Engineering and Technology 3 ABSTRACT CAI TIANYI, M.S., May 2019, Electrical Engineering Optimization and Characterization of a Laser Engraving System for Carbon-Based Electronic Devices Director of Thesis: Savas Kaya Flexible electronics has become a burgeoning research field, and it has shown high potential in the industrial field due to its material and functional flexibility, as well as its low cost and environmentally-friendly features. Predominantly additive printing- based technologies have been utilized to fabricate flexible electronics on various substrates. Direct laser-writing is an alternative approach that can selectively modify the surface of a layer to form lasting chemical or physical changes that can further lower cost and expand fabrication toolsets for high-resolution flexible devices. The first part of this thesis methodically explores a low-cost compact laser scribing or engraving tool that carbonizes the surface of polyimide polymer (Kapton®), paper, and wood layers that turned into conductive upon irradiation.
    [Show full text]
  • ULS User Guide
    User Guide www.ulsinc.com ©2008 Universal Systems, Inc. All Rights Reserved. The Universal Laser Systems logo and name, and VersaLASER are registered trade- marks, and High Power Density Focusing Optics, Quick Change, Rapid Reconfiguration, SuperSpeed are trademarks of Universal Laser Systems, Inc. All other company and product names are trademarks or registered trademarks of their respective companies. Universal’s laser systems are protected under one or more of U.S. Patents: 5,051,558; 5,661,746; 5,754,575; 5,867,517; 5,881,087; 5,894,493; 5,901,167; 5,982,803; 6,181,719; 6,313,433; 6,342,687; 6,423,925; 6,424,670; 6,983,001; 7,060,934. Other U.S. and international patents pending. The VersaLASER system has been awarded U.S. Design Patent No. D517,474 for the unique design of its external cabinet, which also functions as a Class 1 laser safety enclosure. 2 Thank you for choosing Universal Laser Systems®. We appreciate innovative customers like you who have made Universal Laser Systems an integral part of their business. Universal Laser Systems is committed to providing the highest level of customer satisfaction and support. To ensure your satisfaction, we urge you to read the documentation contained within the Reference Guide and User Guide CD. Since 1988, Universal Laser Systems has been committed to continually improving our technology and customer-driven laser solutions. Your satisfaction is very important to us and we welcome your feedback. Tell us about your experience with Universal Laser Systems and our systems at [email protected] Should you have any questions during your installation, please contact your local representative or Universal Laser Systems’ Customer Service Team at 480-609-0297 (USA), +43 1 402 22 50 (Austria), +81 (45) 224-2270 (Japan) or e-mail us at [email protected].
    [Show full text]
  • Speedmarker Series Laser Marking Systems Created for Automation Created for Automation
    SpeedMarker Series Laser marking systems Created for automation Created for Automation The use of the laser markers of the SpeedMarker series leads to enormous productivity, supports automation processes and inspires by the simple handling - both in data preparation and in daily work. By marking dynamic data and endless possibilities with AdvancedScripting, the SpeedMarker series is exactly the right choice for machine manufacturers, toolmakers, engravers and job shoppers. Individual components as well as large batch sizes are marked with a laser class 2 system for complete traceability, brand communication or with functional markings. This saves time and reduces your unit and running costs. The efficient production of permanent markings on almost all metals and, with the MOPA option, on many plastics is guaranteed. By infinity we mean the design of direct component markings, logos, designs, dynamic data (barcodes, serial numbers, etc.), photos as well as readable 1-point fonts and smallest geometries. Trotec’s laser markers meet the highest quality requirements in terms of legibility and durability of the markings - enabling compliance with the most stringent guidelines such as UID, UDI, etc. The laser cells have a robust design, are designed for longevity and comply with laser class 2. SpeedMarker 300 Desktop laser for small components SpeedMarker 700 Precise marking with minimum space requirement The laser processing cells also offer maximum flexibility in The product line is 100% developed and manufactured in terms of size and number of components. Especially with Austria and Germany and sold through 18 sales subsidiaries, SpeedMarker 1300, SpeedMarker 1350 and SpeedMarker increasing profitability for customers in more than 90 1600, individual large or heavy components can be handled countries.
    [Show full text]