DOCSLIB.ORG

Comfort Living with Beautiful House Plan from SCG Real House Figure with Geographic Model

Total Page：16

File Type：pdf, Size：1020Kb

Download full-text PDF Read full-text
Comfort Living with Beautiful House Plan from SCG Real House Figure with Geographic Model Comfort Living with Beautiful House Plan from SCG Real house figure with geographic model SCG Purlin and Clip Lock for Roman Tile Series SCG Flashing Sheet SCG Smartwood Fascia Board Cover all joints and connected areas of the roof with Choose the best woodwork quality for your house’s SCG Purlin and Clip Lock - groundbreaking standard no more concern to leakage problems. With high soffit and gable, with its strength and durability, and in tightening roman tiles. It is easy and convenient to flexibility and robust steel materials, it could flex into the factory-coated primer that allows you to apply use without having to drill the roof. The rustic-proof roof tiles’ curves perfectly with no damages and can paint over instantly. property is affirming throughout service life owing to be painted over with SCG Roofing Paint blending the SGC galvanized Purlin. sheet to the roof flawlessly. SCG Smartwood Wood Plank SCG Smartboard Suitable for the house’s external wall and gable, Use SCG Smartboard, either Squared Edge or Wood Grain tighten with SCG Self-drilling Screw and covered Series, as verandah ceilings with space lining installation. the external wall corner by SCG Smartwood Cement The product is resistant to water and moisture while providing Angle Hip End for External Angle. Use SCG Acrylic its beauty. Paint for Wood Plank to cover joints and nob marks for that final touch with refinement. Layout Plan Section - Elevation SCG Purlin and Roman Tile Clip Lock @ 1.00 m. B B C-shaped Steel Ridge 150 SCG Round Ridge - Brown SCG Round Ridge - Brown C-shaped Steel Rafter 100 @ 1.00 m. C-shaped Steel Post 150 SCG Purlin and Roman Tile Clip Lock @ 1.00 m. SCG Roman Tile - Brown, C-shaped Steel Ridge 150 with full ridge and accessories A B C A B C C-shaped Steel Rafter 100 @ 1.00 m. SCG Roman Tile - Brown, C-shaped Steel Post 150 with full ridge and accessories Top of Ridge Top of Ridge Beam Level Beam Level Top of Roof SCG Eaves Liner with 6” Top of Roof Metes and Bounds; 11.00 m. width Beam Level and 8” width x 4 m. Beam Level SCG Fascia Board with 6” length Soffit Line and 8” width x 4 m. length Open Garden Space SCG Smartwood SCG Roman Tile – Brown, Living Cement Angle Hip End Bedroom 1 Rm. 1st Floor Level Hall Living Rm. Dining Area 1st Floor Level Cleaning Area with full ridge system and accessories +0.40 Verandah Cleaning Area +0.40 F1 +0.30 - Ground Level Ground Level Bathroom F4 +0.30 C2 SCG Flashing Sheet, painted with SCG Roofing Paint for Roman Tiles A B C Kitchen Dining Area F2 +0.40 C1 F2 +0.40 C1 Section (A)-(A) Section (B)-(B) Garden Garden A A Top of Ridge Top of Ridge A A Beam Level Beam Level Bedroom 1 Living Room F2 +0.40 C1 F2 +0.40 C1 Top of Roof Top of Roof Beam Level Beam Level Open Space Bedroom 1 1st Floor Level 1st Floor Level F2 +0.40 C1 Hall +0.40 +0.40 F2 +0.40 C1 Ground Level Ground Level Soffit Line SCG Valley Trough Gutter North North Verandah A B C F3 +0.30 C3 Parking - +0.10 - Elevation 1 Elevation 2 Garden Top of Ridge Top of Ridge Beam Level Beam Level B B 1st Floor Plan Roof Plan Top of Roof Top of Roof Beam Level Beam Level Details Open A B Space Specification 1st Floor Level 1st Floor Level +0.40 +0.40 +2.70 Ceiling Height +2.70 Ceiling Height +2.70 Ceiling Height Floor Specification Ground Level Ground Level Slope 1:200 DETAIL F1 RC. slab finished with 12” x 12” skid-resistant ceramic tiles Slope 1:200 F2 RC. slab screed finished with parquet C B A F3 RC. Slab finished with 12” x 12” ceramic tiles F4 RC. Slab finished with 8” x 8” skid-resistant ceramic tiles Elevation 3 Elevation 4 A B Wall Specification WC. Details Plan 1 WC. Section (1) WC. Section (2) WC. Section (3) DETAIL SCG PRODUCT LISTS SCG Smartwood Wood Plank – Ivory, landscape overlapping installation with 6 inches width Detail Plan - Door Detail/Door Legend 1 and 4 meters length 1 SCG Roman Tile – Brown 421 Tiles 15 SCG Smartwood Fascia Board, size 20x400x1.60 cm. 17 Boards Tighten with SCG Self-drilling Screw, sealed the joint and nob marks by SCG Smartwood Size 50 x 120 x 0.5 cm. (167 sq.m.) 16 SCG Smartwood Wood Plank – Ivory, size 15x400x0.8 cm. 215 Boards Acrylic Paint Sealant 2 Brick wall with smooth cement cover, painted with acrylic paint 2 SCG Round Ridge 39 Tiles 17 SCG Self Drilling Screw for Wood Plank (1 box contains 250 screws) 7 Boxes 3 Brick wall with cement cover, finished with 8” x 8” ceramic wall tiles 3 SCG Round Hip End 47 Tiles 18 SCG Cement Angle Hip End (External Angle) 12 Blocks 4 SCG Smartboard Squared Edge Series with 8 mm. thick, size 120 x 240 cm. 4 SCG Round Ridge End 10 Tiles 19 SCG Cement Angle Hip End (Internal Angle) 4 Blocks No space lining installation, finished with wallpaper or acrylic paint Rail Double door in teak rail, with 5 mm glass panel Rail Single door in teak rail, with teak panel Rail PVC single door with fixed louver panel Rail Single door with water-resistant teak plywood rail and casement window 5 SCG Barge 35 Tiles 20 SCG Smartwood Acrylic Paint Sealant 4 Pipes Frame Rose wood frame 2”x4” Frame Rose wood frame 2”x4” Frame PVC frame 2”x4” Frame Rose wood frame 2”x4” Ceiling Specification Hinge Copper black oxide hinge 3”x4” (4 units/hinge) Hinge Copper black oxide hinge 3”x4” (3 units/hinge) Hinge Copper black oxide hinge 3”x4” (3 units/hinge) Hinge Copper black oxide hinge 3”x4” (3 units/hinge) 6 SCG Barge End 4 Tiles 21 SCG Acrylic Paint for Wood Plank – Ivory 1 Can Key Knob Key Knob Key Knob Key Knob DETAIL Handle Handle (to be selected during construction) Handle Handle (to be selected during construction) Handle Handle (to be selected during construction) Handle Handle (to be selected during construction) Bolt Copper black oxide bolt of 6” (top-bottom) Bolt Copper black oxide bolt of 6” (top-bottom) Bolt Copper black oxide bolt of 6” (top-bottom) Bolt Copper black oxide bolt of 6” (top-bottom) Skylight Skylight Skylight Skylight 1 SCG Smartboard 2-side Tapered Edge Series with 6 mm. thick, size 120 x 240 cm. 7 SCG Clip Lock for Roman Tile Series* 842 Pieces 22 SCG Smartboard Squared Edge Series, Size 120x240x0.8 cm. 25 Boards /�Clerestory /�Clerestory /�Clerestory /�Clerestory Details Plan - Window Detail/Window Legend Tighten with SCG Screw 25 mm., screed finished with SCG Smartboard Plaster Joint Compound 8 SCG Purlin * 66 Blocks 23 SCG Smartboard 2-side Tapered Edge Series, Size 120x280x0.6 cm. 26 Boards 2 SCG Smartboard Squared Edge Series with 4 mm. thick, size 120 x 240 cm., installed on SCG Self Drilling Purlin Screw T-Bat galvanized iron metal frame 9 (1 box contains 500 screws) 1 Box 24 SCG Smartboard Squared Edge Series, Size 120x240x0.4 cm. 7 Boards 3 SCG Smartboard Squared Edge Series with 4 mm. thick, size 120 x 240 cm., space lining SCG Ayara Self Drilling Tile Screw** installation 10 (1 box contains 500 screws) 1 Box 25 SCG Smartboard Wood Grain and Ventilated Wood Grain Series, 70 Boards SCG Smartboard Wood Grain Series alternating with Ventilated Wood Grain Series, size SCG Eaves Filler Set for Roman Tile Series size 60x120x0.4 cm. 4 60 x 120 cm., space lining installation 11 (1 box contains 10 pieces) 12 Boxes Ground Level Ground Level Roof Specification 12 SCG Valley Trough Gutter 5 Blocks 27 SCG Screw 25 mm. (1 box contains 500 screws) 7 Boxes Rail Casement glass window in teak rail with 5 mm. glass panel Rail Casement glass window in teak rail with 5 mm. glass panel Rail Fixed louver window with internal window screen and ventilation set-up, clear glass with 5 mm thk 13 SCG Flashing Sheet 14 Sheets 28 SCG Smartboard Plaster Joint Compound (1 bag contains 25 kg.) 2 Bags Frame Rose wood frame 2”x4” Frame Rose wood frame 2”x4” Frame Rose wood frame 2”x4” - SCG Roman Tile – Brown, with full ridge system and accessories Hinge Copper black oxide hinge 3”x4” (2 units/hinge) Hinge Copper black oxide hinge 3”x4” (2 units/hinge) Hinge SCG Smartwood Fascia Board, Handle U-shaped copper black oxide handle of 4” Handle U-shaped copper black oxide handle of 4” Handle - Steel Roof Truss as specified in the plan 14 17 Boards Bolt Copper black oxide bolt of 4” (top-bottom) Bolt Copper black oxide bolt of 4” (top-bottom) Bolt size 15x400x1.60 cm. Skylight Skylight Skylight /�Clerestory /�Clerestory /�Clerestory Wooden louver for air ventilation ½”x2” *SCG Clip Lock for Roman Tile Series must be used with SCG Purlin only **Use to attach the hip end of the ridges.
Load more

Recommended publications
  • ROOF TILES Build Something Great™
    BORAL ROOF TILES Build something great™ Roof Tiles TECHNICAL INFORMATION GUIDE www.boral.com.au/rooftiles April 2015 Roof Tile Manual Contents Introduction 3 Concrete Roof Tiles 27 Foreword 4 Capri SA 28 Important 4 Contour NSW, VIC 29 Quality Control 4 Linea NSW 30 Specifications 4 Linea SA 31 Local Authorities 4 Linea VIC 32 Performance 4 Macquarie NSW, VIC 33 Safety 4 Slimline NSW, VIC 34 Terracotta 5 Striata SA 35 Concrete 5 Striata VIC 36 Roofing Terminology 6 Vogue NSW 37 Vogue SA 38 Design Considerations 11 Vogue VIC 39 Code Considerations 12 Standards 12 Accessories 41 Bushfire Attack Levels (BAL) 12 Terracotta Accessories 42 Wind Forces 12 Concrete Accessories 44 Terrain Categories 13 General Accessories 45 Basic Wind Regions 14 Installation Details 47 Fixing Tile Roofs in Cyclonic Regions 15 Preparation for Installation 48 Minimum Roof Pitch 15 Tile Set Out 48 Maximum Rafter Lengths 15 Counter Battens 51 Maximum Rafter Lengths - No Sarking 15 Valleys 52 Sarking 16 Fascia Height 52 Insulation 16 Barge Height 53 Ventilation 16 Anti-Ponding Boards 53 Performance Characteristics 17 Laying the Roof 53 Thermal Performance 18 Roof Tile Fixing Systems 54 Acoustic Performance 18 Sarking 55 Water Collection 18 Ridge Systems 56 Testing: AS 2049 - Roof Tiles 20 Ridge Installation 56 Testing: AS 2050 - Installation of Roof Tiles 20 Hip Details 58 Fire Resistance 21 Valley Boards 58 Sarking at Valleys 58 Terracotta Roof Tiles 23 Valley General 59 French 24 Barge/Gable Systems 59 Shingle 25 Roof and Flashings Details 61 Swiss 26 Bedding and Pointing 63 Roof Completion 63 Architectural Details 65 Frequently Asked Questions 76 Contacts and Further Information 80 2 April 2015 | BORAL ROOF TILES Introduction Roof Tile Manual Introduction Foreword Local Authorities This manual has been prepared to assist the builder, architect Fixing standards and product specifications contained in this leaflet and installer, to specify, detail, prepare and install Boral roof tiles.
    [Show full text]
  • Typical Details Plain Tile
    Typical Details Plain Tile Eaves Top edge abutment Underlay Trussed Code 4 lead flashing to top course tiles 267 x 165mm Plain tile rafter extend 150mm min. 38 x 25mm s.w. batten for rafters at max. 600 c/c Cross-flow eaves ventilator Over-fascia ventilator Insulation Tilting fillet Wall plate 38 x 25mm Batten Underlay Tiled Valley Verge Batten Valley Tile Mortar bedding 267x247mm tile and half Adjacent tiles cut to rake of valley The Russell Plain Tile has the appearance of a traditional clay tile but the strength and economy of a concrete tile. It is available in ten smooth finish Batten colours and four Heritage Range colours. A two Trussed rafter tone granular option is also available. Additional underlay, 1m wide Underlay carried across cavity strip. Laid down centre of valley Features and Benefits Tile Specification 267 x 165mm Plain Tile laid face down or undercloak Traditional size cross Ridge (Bedded) cambered double lap tile. Continuous mortar edge bedding Side Abutment Allows for flexibility in roof 165 267 Tile slip in solid design. bedding at butt joint The vertical surface is to be 75mm minimum cover Provide the appearance of covered with Russell Plain Code 4 Lead Cover flashing clay tiles. Tiles laid to a maximum gauge of 115mm. Each tile must be Code 3 Lead soaker Ideal for both pitched and twice nailed using 38 x vertical roofing 2.65mm aluminium alloy nails 100mm minimum as per fixing specification. Batten Underlay overlapped at ridge minimum 150mm Underlay Battens at max. 267 x 247mm Trussed rafter 100mm gauge Tile-and-a-half Trussed rafter RUSSELL Roof Tiles Nicolson Way, Wellington Road, Burton-on-Trent, Staffordshire, DE14 2AW Tel: 01283 517070 Fax: 01283 516290 www.russellrooftiles.co.uk Plain Tile Technical Data Technical Data NO.
    [Show full text]
  • Cma 30 Step-By-Step Roofing Guide
    CMA 30 STEP-BY-STEP ROOFING GUIDE Published by the Concrete Manufacturers Association Block D, Lone Creek Waterfall Office Park Bekker Road, Midrand PO Box 168 Halfway House 1685, Gauteng Telephone (011) 805 6742 Fax (011) 315 4683 Email [email protected] Website www.cma.org.za Contents Introduction 2 Stage 1 Erection Of Trusses 3 Step 1 Fixing Wall Plates 4 Step 2 Marking Out Truss Spacing 5 Step 3 Positioning Trusses at Gable Walls 6/7 Step 4 Positioning Next Two Trusses 8 Step 5 Fixing of Diagonal Cross Bracing 9 Step 6 Positioning Remaining Trusses 10 Step 7 Alignment of Trusses 11/12 Step 8 Fixing Permanent Bracing 13/14 Step 9 Anchoring of Trusses 15 Stage 2 Laying Of Underlay 16 Step 10 Fixing of Underlay 17/18 Step 11 Underlay at Eaves 19 Stage 3 Fixing of Tiling Battens 20 Step 12 Fixing of Plaster Battens 21 Step 13 Cutting of Rafter Ends 22 Step 14 Fixing of Tilting Batten 23 Step 15 Fixing of Top Batten 24 Step 16 Spacing of Battens 25 Step 17 Marking of Batten Spacing 26 Step 18 Fixing of Battens 27 Step 19 Establishing Verge Overhang 28 Step 20 Cutting of Batten Ends 29 Step 21 Fixing Verge Counter Battens 30 Step 22 Cutting of Tilting Batten 31 Stage 4 Fixing Of Roof Tiles 32 Step 23 Alignment of Tiles 33 Step 24 Fixing Requirements of Tiles 34 Step 25 Fixing of Rake Tiles 35/36 Step 26 Setting out of Ridge Tiles 37 Step 27 Placing DPC under Ridge Tiles 38 Step 28 Mixing of Bedding Mortar 39 Step 29 Fixing and Finishing of Ridge Tiles 40 Step 30 Fixing Agrément Approval Plate to Roof Eaves 41 1 Introduction “Affordable Concrete Roofing System” South Africa faces a housing shortage of massive proportions, and although many different schemes and developments of low cost housing have been attempted, the backlog does not diminish.
    [Show full text]
  • Instant Roof Nui Overview
    Instant Roof Nui Overview Features Please see tutorials under Instant Roof for more information. Instant Roof Nui does everything the Instant Roof Pro does with added features as follows: SU 7 through SU 2014 Access methods from Instant Roof Nui Toolbar As a Skethup Extension, it can be loaded or unloaded as needed. Full Roof Framing members or eaves only. (Conventional wood framed – no structural components such as steel, trusses,..) Add Roof Framing to roofs made by other methods or to other sloped faces Create Hips, Rafters, and Beams with decorative end profiles from lines and/or faces. Corbels for flat soffits Cornice Mouldings for flat soffits. Choose from preset profiles or create your own. (V2.0) Beam Ends at Gables and Dutch Gables Optional Underside of Roof (ceiling) Greek Returns and Queen Returns at Gables Bird Blocks : Add angled or plumb (eave rafter tails only. Not for full roof framing) More preset roof slopes or use angles for slopes Roof styles : Choose from many preset or create custom user style library including custom style images Dutch Gable Styles : Choose from many preset styles or create custom user style library including custom style images Roof Detail Styles: Choose from many preset or create custom user style library including custom style images: Choose from many predefined Beam, Hip, and Rafter end profiles . Align Material Textures on Eaves, Rafters, Beams, Hips, Roofing Gutters : Choose from predefined gutter profiles Additional Roof Material options : Roman tile, Flat tiles or Shingles, Variable width standing seams… Mission tile bird stops and Ridge Closures Variegated color roof tiles and Shingles Reapply Change or Delete Materials as a separate operation from roof or roof detail creation .
    [Show full text]
  • Concrete Roof Tiles Section 07321 - 1 Addendum No
    Concrete Roof Tiles Section 07321 - 1 Addendum No. 1 SECTION 07321 CONCRETE ROOF TILES PART 1 - GENERAL 1.1 RELATED DOCUMENTS A. Drawings and general provisions of the Contract, including General and Supplementary Conditions and Division 01 Specification Sections, apply to this Section. 1.2 SUMMARY A. Section Includes: 1. Concrete Roof Tiles. 2. Underlayment. B. Related Sections: 1. Division 06 Section "Rough Carpentry" for wood framing. 2. Division 07 Section "Sheet Metal Flashing and Trim" for flashings. 1.3 DEFINITION A. Roofing Terminology: See ASTM D 1079, glossaries in TRI/WSRCA's "Concrete and Clay Roof Tile Design Criteria Installation Manual for Moderate Climate Regions," and NRCA's "The NRCA Roofing and Waterproofing Manual" for definitions of terms related to roofing work in this Section. 1.4 SUBMITTALS A. Product Data: For each type of product indicated. B. Samples for Verification: For the following products, of sizes indicated, to verify color selected: 1. Concrete Roof Tile: Full size. 2. Accessory Tile: Full size, each type. 3. Fastenings: Wire-tie system components: 12 inches long. Concrete Roof Tiles Section 07321 - 2 Addendum No. 1 C. Qualification Data: For qualified Installer. D. Product Test Reports: Based on evaluation of comprehensive tests performed by manufacturer and witnessed by a qualified testing agency, for concrete roof tiles. E. Research/Evaluation Reports: For each type of concrete roof tile required, from the ICC. F. Maintenance Data: For each type of concrete roof tile to include in maintenance manuals. G. Warranties: Sample of special warranties. H. Maintenance Material: Furnish 50 square feet of extra materials that match products installed and that are packaged with protective covering for storage and identified with labels describing contents.
    [Show full text]
  • CHAPTER 15 ROOF ASSEMBLIES and ROOFTOP STRUCTURES SECTION 1501 GENERAL 1501.1 Scope
    CHAPTER 15 ROOF ASSEMBLIES AND ROOFTOP STRUCTURES SECTION 1501 GENERAL 1501.1 Scope. The provisions of this chapter shall govern the design, materials, construction and quality of roof assemblies, and rooftop structures. SECTION 1502 DEFINITIONS 1502.1 General. The following words and terms shall, for the purposes of this chapter and as used elsewhere in this code, have the meanings shown herein. BUILT-UP ROOF COVERING. Two or more layers of felt cemented together and surfaced with a cap sheet, mineral aggregate, smooth coating or similar surfacing material. INTERLAYMENT. A layer of felt or nonbituminous saturated felt not less than 18 inches (457 mm) wide, shingled between each course of a wood-shake roof covering. MECHANICAL EQUIPMENT SCREEN. A partially enclosed rooftop structure used to aesthetically conceal heating, ventilating and air conditioning (HVAC) electrical or mechanical equipment from view. METAL ROOF PANEL. An interlocking metal sheet <->having a minimum installed weather exposure of 3 square feet (.279 m2) per sheet. METAL ROOF SHINGLE. An interlocking metal sheet having an installed weather exposure less than 3 square feet (.279 m2) per sheet. MODIFIED BITUMEN ROOF COVERING. One or more layers of polymer-modified asphalt sheets. The sheet materials shall be fully adhered or mechanically attached to the substrate or held in place with an approved ballast layer. PENTHOUSE. An enclosed, unoccupied structure above the roof of a building, other than a tank, tower, spire, dome cupola or bulkhead, occupying not more than one-third of the roof area. POSITIVE ROOF DRAINAGE. The drainage condition in which consideration has been made for all loading deflections of the roof deck, and additional slope has been provided to ensure drainage of the roof within 48 hours of precipitation.
    [Show full text]
  • ROOF TILES Build Something Great™ ROOF TILES TECHNICAL INFORMATION GUIDE
    BORAL ROOF TILES Build something great™ ROOF TILES TECHNICAL INFORMATION GUIDE December 2017 Roof Tile Manual Contents Introduction 3 Concrete Roof Tiles 31 Foreword 4 Capri SA 32 Important 4 Contour NSW, VIC 33 Quality Control 4 Linea NSW, QLD 34 Specifications 4 Linea SA 35 Local Authorities 4 Linea VIC 36 Performance 4 Macquarie NSW, VIC, QLD 37 Safety 4 Slimline NSW, VIC, QLD 38 Designer Ceramic + Terracotta 5 Striata SA 39 Concrete 5 Striata VIC 40 Roofing Terminology 6 Vogue NSW, QLD 41 Vogue SA 42 Design Considerations 11 Vogue VIC 43 Code Considerations 12 Standards 12 Accessories 45 Bushfire Attack Levels (BAL) 12 Terracotta Accessories 46 Wind Forces 12 Designer Ceramic Accessories 48 Terrain Categories 13 Concrete Accessories 49 Basic Wind Regions 14 General Accessories 50 Fixing Tile Roofs in Cyclonic Regions 15 Installation Details 51 Minimum Roof Pitch 15 Preparation for Installation 52 Maximum Rafter Lengths 15 Tile Set Out 52 Maximum Rafter Lengths - No Sarking 15 Counter Battens 55 Sarking 16 Valleys 56 Insulation 16 Fascia Height 56 Ventilation 16 Barge Height 57 Performance Characteristics 17 Anti-Ponding Boards 57 Thermal Performance 18 Laying the Roof 57 Acoustic Performance 18 Roof Tile Fixing Systems 58 Water Collection 18 Sarking 59 Testing: AS 2049 - Roof Tiles 20 Ridge Systems 60 Testing: AS 2050 - Installation of Roof Tiles 20 Ridge Installation 60 Fire Resistance 21 Hip Details 63 Valley Boards 63 Terracotta Roof Tiles 23 Sarking at Valleys 63 French 24 Valley General 64 Swiss 25 Barge/Gable Systems 64 Designer Ceramic Roof Tiles 27 Roof and Flashings Details 66 Artline 28 Bedding and Pointing 68 Shingle 29 Roof Completion 68 Wave 30 Architectural Details 69 Frequently Asked Questions 85 Contacts and Further Information 88 2 December 2017 | BORAL ROOF TILES Introduction Roof Tile Manual Introduction Foreword Local Authorities This manual has been prepared to assist the builder, architect Fixing standards and product specifications contained in this leaflet and installer, to specify, detail, prepare and install Boral roof tiles.
    [Show full text]
  • Assembly Instructions Were Created to Help Both the Private Individual and the Professional
    Assembly 2019 | Roof Tiles Plannja Royal, Plannja Regent and instructions Plannja Regal plus flashings and fittings Table of contents Some words of advice .......................................................................... 4 General preparations, roofing ................................................................ 7 Installing Plannja Royal and Plannja Regent ........................................ 15 Installing Plannja Regal ..................................................................... 31 Installing Plannja Flashings & Fittings ................................................... 41 Some words of advice Plannja’s assembly instructions were created to help both the private individual and the professional. In order to make it easier for everyone to immediately find the instructions and the help they need, we have di- vided the assembly instructions into distinct sections. The first chapter – General preparations, roofing – is -ex tremely important for those who have never laid a roof before. Don’t forget to stay calm and think through every step before you get to grips with the actual assembly. Good preparation and a methodical approach are the key to a perfect result. The assembly instructions must be fol- lowed for our warranty to be valid. Plannja is Europe’s leading manufacturer of thin sheet building materials. Our wide range of products means that we can provide product systems and total thin sheet solutions for almost any building project. Roof components Chimney fittings. Specially adapted to the chimney by your local roofer. Stink pipe End cover Gable flashing Drip cap Downpipe Sill 4 – Some words of advice Roof ladder Valley gutter Ridge Ridge tile Roofing sheet End cover gable flashing Ridge, eaves or snow guard Gutter Headwall flash- Sill Ladder hook Headwalling flashing Some words of advice – 5 General preparations Roofing General preparations, roofing – 7 SHEET METAL ROOF When taking delivery of roofing sheet As far as possible, store Plannja construction panel- ling indoors.
    [Show full text]
  • Easy Loft Installation Guide
    A• Dolwnotaatytemspt two woorkrokn thse ajoisftse themselves, this can be dangerous and you could cause substantial damage to the ceiling of the room below should your footing slip. You should use a plank INSTALLATION of wood to slide over the joists that you can lean/stand on to support your weight. • If you do not have a good light source in the loft space, you should arrange for a lighting solution to INSTRUCTIONS be introduced. This could be either a temporary solution in the form of using an extension lead to run a cable through the loft to hang a light from one of the beams or you could even choose to fix a light permanently. Do not rely solely on using torchlight – use a torch in conjunction with another fixed light source. 1. OSntceepin l1 oft, remove product 2. Statretinpg f2 rom the eaves, ensure 3. WShtenpthe3 insulation has 4. ISnstuelapte a4 nd draft proof the loft from packaging and shake to the wall plate is covered and reached the tops of the joists, hatch sit back and enjoy the work towards the centre of the speed its recovery to nominal extra heat saving is achieved savings of a more energy thickness loft by unrolling the product – . by “cross layering” (at right efficient home see note below regarding . adequate ventilation. angles to the joists). The Lay EasyLoft between the Government advises that loft joists to achieve a depth of insulation should be a 100mm – EasyLoft can be minimum depth of 270mm used in conjunction with (including joist insulation). existing insulation.
    [Show full text]
  • Roof Tiling Standards Guide Roof Tiling Standards Guide FEBRUARY 2013 Contents
    BORAL ROOFING Build something great™ Roof Tiling Standards Guide Roof Tiling Standards Guide FEBRUARY 2013 Contents 1.0 Introduction 3 1.1 Standards 2.0 Fixing Recommendations 4 2.1 First Course 2.1.1 First Course Set Out 2.1.2 Concrete Tiles - NSW 2.1.3 Terracotta Tiles - NSW 2.1.4 Concrete Tiles - Vic 2.1.5 Terracotta Tiles – Vic 2.2 Standard Set Out – Concrete Tiles, NSW & Vic 2.3 Standard Set Out – Terracotta Tiles 3.0 Battening 5 3.1 General 3.2 Counter Battens 3.3 Bellcast Battens/Tilting Batten 3.4 Recommended Batten Sizes and Types 3.5 Batten sizes and Rafter Spacings (mm) 3.5.1 Batten Sizes and Rafter Spacing Table 3.5.2 Metal Battens 3.5.3 Acceptable Batten Nails Table 4.0 Sarking 7 4.1 General 4.2 Bushfire Attack Levels (BAL) 4.3 Typical roofing details requiring sarking: 4.4 Eaves 4.5 Anti-ponding board 4.6 Valleys 4.6.1 Valleys Detail 4.7 Hips 4.8 Sarking and Pitch Requirement 4.9 Sarking Important Notes 5.0 Tile Nailing and Other Fastening Materials 10 5.1 Concrete Tiles (Minimum Fixing) 5.2 Terracotta Tiles (Minimum fixing) 5.3 Fixing cut courses 6.0 Laying the Roof 10 6.1 Receipt of Tiles 6.2 Tile Profiles and Bond Pattern 6.3 Loading 6.4 Blending 6.4.1 Loading and Blending Detail 6.4.2 Visual inspection 6.5 Laying and Securing Tiles 6.6 Fixing Recommendations 6.6.1 Fixing Recommendations Table 7.0 Valleys 13 7.1 General 8.0 Bedding and Pointing 13 8.1 Bedding Mortar Mix 8.2 Good Mixing Practice: 8.3 Pointing Mortar 9.0 Ridge Systems 15 9.1 General 9.2 Bedding 9.3 Pointing 10.0 Barge/Gable Systems 16 10.1 General 10.2 Bedding and Pointing Gables 10.3 Barge Rolls 11.0 Steep Pitch Work 17 12.0 Minimum Pitch 17 12.1 Minimum Roof Pitch Table 13.0 High Winds/Terrain Categories 18 14.0 Party and/or Fire Wall Treatment 18 15.0 Roof and Job Completion 18 15.1 Pallets 2 1.0 Introduction Boral Montoro Pty.
    [Show full text]
  • TRADITIONAL BONDING GUTTER CODE: HDL BG Installation Recommendations
    TRADITIONAL BONDING GUTTER CODE: HDL BG Installation Recommendations Positioning Typical Installation Detail The Bonding Gutter® should be placed to allow the slate or tile bond to be maintained and by using either a replacement tile and a half wider Bonding Gutter Typical Tile HDL BG slate if possible. Where the tile nibs may interfere with the Bonding Roof Covering Typical Slate Gutter profile, they should be removed. It is recommended that a Mortar Bed Joint Slate/Tile Battens Roof Covering mechanical fix be provided to replace them. Preparation The Bonding Gutter is designed to fix directly over the tiling or slating battens of both new and adjacent roofs. Any battens and underlay on Underlay the adjacent roof should be checked for condition and if necessary renewed back to the nearest appropriate rafter, any deflective nails should be replaced. Party Wall Fixing Before installing the Bonding Gutter, mark the centre line of its intended position onto the roof and then remove the slates or tiles for cutting. With the slates or tiles removed, install the Bonding Gutter to the established centre line between the old and new roof, commencing at the eaves. Allowing for a 50mm overhang of the Bonding Gutter into the rainwater gutter and fix the Bonding Gutter with nails of acceptable quality through the outer flanges into the battens on both sides and at Fire Break Installation 500mm centres maximum. The last section of the Bonding Gutter should When creating a fire break installation, e.g. at a party be fitted as close to the ridge as possible whilst avoiding any deflection wall, the battens should be cut to allow a smooth to the section laid flat on the battens.
    [Show full text]
  • Terracotta Roofing in Etruria, Corfu and Sicily, a Bacchiad Family Enterprise Nancy A
    Etruscan Studies Journal of the Etruscan Foundation Volume 9 Article 18 2002 Commerce in Exile: Terracotta Roofing in Etruria, Corfu and Sicily, a Bacchiad Family Enterprise Nancy A. Winter Follow this and additional works at: https://scholarworks.umass.edu/etruscan_studies Recommended Citation Winter, Nancy A. (2002) "Commerce in Exile: Terracotta Roofing in Etruria, Corfu and Sicily, a Bacchiad Family Enterprise," Etruscan Studies: Vol. 9 , Article 18. Available at: https://scholarworks.umass.edu/etruscan_studies/vol9/iss1/18 This Article is brought to you for free and open access by ScholarWorks@UMass Amherst. It has been accepted for inclusion in Etruscan Studies by an authorized editor of ScholarWorks@UMass Amherst. For more information, please contact [email protected]. CoMMerce iN ExiLe: Terracotta RoofiNg iN Etruria, Corfu aNd SiciLy, a Bacchiad FaMiLy ENterprise by Nancy A. Winter ollowiNg the appearaNce of terracotta roof tiles iN Greece oN the TeMple of Apollo at CoriNth iN the secoNd quarter of the 7th ceNtury BC (fig. 1), 1 the techNology spread to Italy, where tiles are fouNd iN coNtexts datable to the third aNd fourth quarters of that ceN - F 2 tury at Poggio Civitate (Murlo) aNd Acquarossa iN Etruria. At Poggio Civitate, tiled roofs occur oN a workshop kNowN as the Southeast BuildiNg (figs. 2-3) aNd oN a doMestic structure kNowN as the Lower BuildiNg; at Acquarossa, the earliest tiled roofs are all oN doMestic archi - tecture. 3 The saMe basic tile forMs as occur oN the early CoriNthiaN roof, i.e. flat paN tiles aNd coNvex cover tiles, are used, with adjustMeNts iN scale aNd desigN (sMaller size, separate paN aNd cover eleMeNts) probably iNteNded to speed productioN, reduce costs, aNd ease haNdliNg.
    [Show full text]