Slalom poles & stubbies Slope marking & caution poles Barrier tape Drill bits Warranty Gate panels B-net 1 year on flex pole shaft, bases & hinge Race bibs C-net Radio chest pack

Warranty We are so confident in our product that we offer a 1 year warranty on all flex-pole shafts, bases and flexes. The past seasons this has resulted in less than 3% average warranty claim rate.

Weight BAW gates are about 10% lighter than many competitors’ gates using metal hinges. It may not sound like allot, but matters when one carries 20-30 gate bundles.

History BAW do not have as short history as one may think. It all originated in Östersund, Sweden. Liftbyggarna produced in the late 70's some of the very first flex plastic poles, that also where sold in North America. As Lift- byggarna decided to concentrate on lift building, US Reliable Racing Sup- ply (RRS) were given the permission NEW! MID Featherbase to continue with what today is Break- Offers less recistance during course pulling, A-Way slalom poles. And the first yet great performance. A great alternative for hinged poles ever to be used in a WC- those that feel the Featherbase can be tough event where BAW in Waterville Valley to pull out off the snow yet seek featherbase 1980. BAW was the official supplier of has in just a few years established itself as stay-put performance. the Nagano Olympics as well as the a major slalom pole supplier in Europe. WC-finals and World Championships Not at all surprising considering: Shafts now with even in Vail. Since 2000 all WC-events at greater durability Beaver Creek have been run with Featherbase ease BAW shafts have been among the most du- BAW gates, and the Vail/Beaver Creek The Featherbase used on Break-A-Way (BAW) rable on the market. Since Nov. 2013 a new world championship will again be run slalom poles generates massive time sav- Polycarbonate compound was taken in to use, with BAW gates in 2015. ings both in course setting as well as course and since warranty claims are less than half removal. In none favorable snow conditions of before. BAW Product range the savings will be even greater due to that We have worked hard to include only nothing stays put like the Featherbase. Not Now with greatly improved hinge. products with extreme durability and even in dry cold snow, and therefore greatly The BAW hinges have often been considered function. limits course maintenance. Time that can the poles weakness. No longer! Since a year Nothing ele is worthy the Break-A- better be spent on training and coaching, or back it has been improved, and warranty Way name!. running smooth competition events. claims have since almost disapeared! - A-pole A-pole B-pole B-pole C-pole C-pole #42738 31mm replacement shaft 172cm. #42738 31mm replacement shaft 163cm. #44380 27mm relacement shaft 137cm. #41731 27mm relacement shaft 137cm. #44376 25mm replacement #44354 31mm edge protector. #44354 31mm edge protector. #43044 27mm edge protector. #42869 25mm edge #10200, 31mm MID Featherbase flex pole, 172cm shaft. pole, #10200, 31mm MID Featherbase flex #42689, 31mm Featherbase flex pole, 172cm shaft. pole, #42689, 31mm Featherbase flex outside 31mm pole Polycarbonate 215cm long, with #PC215W, 30cm long hose mounted at bot a snug fit into same size holes that Featherbase should be mounted in to. tom allows 163cm shaft. pole, #42690, 27mm Featherbase flex 163cm shaft. pole, #10000, 27mm MID Featherbase flex 137cm shaft. pole, 27mm MID Featherbase flex #27Jr, 137cm shaft. pole, #10100, 25mm MID Featherbase flex #44083, 31mm Featherbase Lite static pole, 172cm shaft. #44083, 31mm Featherbase Lite static pole, 215cm. outside pole, #PC215, 31mm Polycarbonate 163cm shaft. #44452, 27mm Featherbase Lite static pole, #42170 flex.

The Break-A-Way collection offers the stopper. #41593 Pole full range of 31mm A-poles, 27mm B-poles, 27mm shorter C-poles, 25mm C-poles, as well as a range of options for outside poles. The com- ponents are easily interchangeable. #20000 MID Featherbase. #42641 Featherbase. #42827 Featherbase Lite. Featherbase #42827 #PC160, 31mm Polycarbonate outside pole, 160cm.

#PC160W, 31mm Polycarbonate outside pole 160cm long, with 30cm long hose mounted at bottom allows a snug fit into same size holes that Featherbase should be mounted in to. practical pockets andpencilholder. 3 Includes size. radio to adjustable #RCP10 Robust Radio ChestPack

#42691, 60cm Slalom Stubbie with Featherbase Lite.

#44036, 60cm replacement Stubbie shaft. ing tape. #42500 ing tape. #42501 , 30mmeasur , 15mmeasur printable pocket lid. custom with additional #RPC10b

#42844, 40cm Stubbie with Featherbase Lite. like RCP10 - -

#42828, 40cm replacement Stubbie shaft.

#42825, Comp. Flex Stubbie 50mm x 42cm with Featherbase Lite. 25cm, green orPink. #44084 Brushmarker

#42866, Comp. Stubbie no Flex, 50mm x 42cm with Featherbase Lite. BAWF90D Caution panel 95x115cm. Individually digital printed with any info customer desires. No minimums.

#HT1000 reel in plastic with two connector shanks for two different rewinding gears.

BAWF90D

#HT300 300cm durable Cable real in #44054b, Poly- metal. Holds 270m of 25mm barrier tape. fence hook with 50mm metal ring for barrier tape mounting. #41831 25mm 90m long orange bar- #PC160, Poly- rier tape. fence pole 31mm 160cm, red or blue. #41833 50mm 90m long orange bar- rier tape. #33010012, 30m long signal lints on 12mm rope, with red, blue and yellow PVC flags.

Prices excluding 25% VAT and freight cost.

#50040078, 200m 10mm Polyethylene UV stabilized rope available in red, blue and yellow/black.

#JON Snow Shaper in Dural-alu- minum. After many requests we finally decided to develop a range of spe- cial Kids playground items. Since before we already offer low Speed- fences. Now we have added different turn- ing aids as well as a kids entrence arch. All of these can be digitally custom printed with almost any print design.

#FUN10 Kids lift entrence arch 120x140x- 30cm, with foam core and Cordura bottom reenforcement. Can be mounted on PB80 or PC80W poles. , 60cm long 32mm Polycarbinate polewith 30cm Polycarbinate , 60cm long 32mm polewith 30cm Polycarbinate , 80cm long 32mm , 40cm Snowboard Stubbie with Featherbase Lite. Lite. Stubbie with Featherbase , 40cm Snowboard , 60cm long 32mm Polycarbinate pole. pole. , 60cm long 32mm Polycarbinate pole. , 80cm long 32mm Polycarbinate #42844 #PC60W hose. #PC60 #PC80W hose. #PC80

#FUN30 Kids stump turning A selection of poles to mount #FUN20 Kids figure turning aid o30x45cm with foam core. FUNSKI items on. From inexpen- aid 60x100x10cm with foam Can be mounted on PB60 or sive PC60 & PC80, to PC60W & core. Can be mounted on PC60W poles or a Snow- PC80W that won’t come undone PB60 or PC60W poles or a board Stubbie. as easily. To Snowboard Stubbie Snowboard Stubbie. that offers additional flex. #41695 Launch pads. These should be part of every serious start arrangement in order to avoid ski pole holes, stuck ski poles, and maintain consitent starting conditions throughout the event, regardless of snow conditions. Heavy duty 33x33cm rubber construc- tion with anti slip borrom surface that does not require icing down to stay put. .

Milwaukee M18 FUEL Compact extremely Heavy duty drill driver with brushless motor, overload protection, power indicator, 1850 rpm 70 Nm, 2 Li-ion 18V 4A batteries and charger, metal chuck and 3 year warranty. Long lasting batteries that retains strength also in cold temperature.

Metal drill bits High qualíty double hard metal points with triangular shank. 50cm length.

#41265, 19mm drill bit for 15mm Fiberglass poles.

#SLO32, 32mm drill bit for Polyfence poles.

#SLO35, 35mm drill bits for B- net poles and screw bases.

#SLO38, 38mm drill bits for screw bases on glacier ice, and Featherbase.

#SLO41, 41mm drill bit optimal for Featherbase gates.

#SLO41/24, 41mm drill bit with 24cm stopper to be used in ski domes with drilling restricti ons. #BAWL50 Brush marker carrying case. With zip-openings in both ends. Att aches in pant belt. Holds at least 20 markers.

OrangeFox metallic #QClip80 pole strap, plastic drill bits. Heavy duty 80cm red The first drill bit of its kind. 8mm elastic cord with Extremly light weight and shaped quickclip look. to maximize upward snow & ice #BAWL40 transport. Pole carrying Incorporates two rotatable penta- harness. Holds at gon hard metal points that can be least 25 gates. rotated 5 times to obtane optimal Saves the back sharpness. and makes set- Can also be exchanged for new ting courses on ones. your own easy. Length 50cm, with triangular shank.

OF45mm for Featherbase, #BAWL60 Stubbies carry- OF41mm for Featherbase, ing case. Holds at least 30 Stubbies. OF38mm,

OF35mm for B-net poles,

OF32mm for C-net poles, B-net mounting. B-net is a safety net and must be mounted according to FIS- recommendations that in the event of a competition will be controlled and approved by a TD. B-net can have poles mounted every 1m, 1.5m or 2m , and be in #42876 B-net sliding hook with quick re- rows of one, two or three net parallel to one another depending lease lever. on the speed and terrain. In the case of parallel B-net they must be placed 2.5m apart so that the first net can lay back flat with- #SPA2x20, 50x50mm B-net 2m high and out elevating the skier way up or over the next B-net. 20m long knotless polypropylene lightweight yet extremely durable and UV-resistant. Available in red and blue.

#SPA1.5x20, 50x50mm B-net 1.5m high and 20m long knotless polypropylene lightweight yet extremely durable and UV-resistant. If the speed requires several B-net, but the ter- Available in red and blue. rain offers only room for one, then A-net is the only solution.

#PC35/250 B-net pole for 2m high net. #PC35/200 B-net pole for 1.5m high net. Several B-net in a row most overlap one another, with the lower one behind the upper one, and be tied together so that there is no chance that the skier can pass in-between the two B-nets. B-net can be arranged in many ways, not limited to examples below. However, these are the most common alternatives. This page illustrates how the different alternatives also effect the total price.

Where the two nets should be tied together Alternative A. 20m B-net with 2m pole spacing = 11 poles, each with 2 hooks (1 net + 11 poles + 22 hooks)

Alternative B. 20m B-net with 2m pole spacing without end poles and 1m hanging ends. 10 poles, each with 2 hooks (1 net + 10 poles + 20 hooks)

Mounting of B-net Since the poles offer some elasticity, this elasticity can be used to generate the tension needed to keep the B- Alternative C. net stretched. Start by using the proper 35mm drill bit 20m B-net with 1.5m pole spacing = 14 poles, each with 2 hooks (1 net and drilling the first B-net pole hole at a 10-20 degree + 14 poles + 28 hooks) angle away from the net. Then the rest of the poles straight up and at such a distance from the previous pole that the fence is all stretched out. And finally end with again drilling the hole for the last B-net pole at a 10-20 degree angle away from the net to generate a pulling tension outwards at both ends of the B-net.

Alternative D. 20m B-net with 1.5m pole spacing without end poles and 0.75m hanging ends. 13 poles, each with 2 hooks (1 net + 13 poles + 26 hooks)

This same technique works very well on C-net as well 120cm high Polyfence. 50m roll PF1.2 L50 With sewn in tunnel every 2.5m. 5m P1.2+L05 7,5m P1.2+L7.5 P1.2+FG. Poly- 10m P1.2+L10 fence 1.2m high with sewn 15m P1.2+L15 20m P1.2+L20 tunnels and Fiberglass poles With 160cm Polycarbonate poles every 2.5m inside sew tunnels. C-net or so called “Crowd 5m P1.2+PC,L05 7,5m P1.2+PC,L7.5 control fencing” is not primar- C-net with 1x1cm mesh in UV- 10m P1.2+PC,L10 ily used in order to stop high stabelized high tenecity Polyethyl- 15m P1.2+PC,L15 speed skiers from crashing 20m P1.2+PC,L20 into objects and hurt them- ene, availabe in 1.2, 0.6 and 0.3m With 162cm Fiberglass poles selves. But to keep areas nice height. every 2.5m inside sew tunnels. and tidy looking at the same High visability fence that ski poles 5m P1.2+FG,L05 time as one directs people/ 7,5m P1.2+FG,L7.5 crowds to where one wants and boot buckles won’t catch on. 10m P1.2+FG,L10 them to be or go. Examples Therefore Ideal for lift lines. 15m P1.2+FG,L15 20m P1.2+FG,L20 are lift lines, competition start or finish areas or kids areas. We offer a variety of different C-net to fit most needs 60cm high Polyfence. with different heights, 50m roll PF0.6 L50 colors and mesh count. With sewn in tunnel every 2.5m. 5m P0.6+L05 10m P0.6+L10 Recycle broken slalom 20m P0.6+L20 With 95cm Polycarbonate poles pole sh-afts every 2.5m inside sew tunnels. Our C-net with sewn tunnels 5m P0.6+PC,L05 makes it possible to cut re- 10m P0.6+PC,L10 mains of broken old slalom 20m P0.6+PC,L20 pole shafts down to size to With 95cm Fiberglass poles be reused as C-net fence every 2.5m inside sew tunnels. poles. The uncomplicated 5m P0.6+FG,L05 mounting procedure makes 10m P0.6+FG,L10 20m P0.6+FG,L20 it easy for anybody to slide P0.6+FG. Polyfence 0.6m high with in and secure the poles in to the sewn fence tunnels. sewn tunnels and Fiberglass poles

30cm high Polyfence. 50m roll PF0.3 L50 With sewn in tunnel every 2.5m. 10m P0.3+L10 15m P0.3+L15 20m P0.3+L20 With 160cm Polycarbonate poles every 2.5m inside sew tunnels. P0.3+PC. Poly- 10m P0.3+PC,L10 15m P0.3+PC,L15 fence 0.3m 20m P0.3+PC,L20 high with sewn With 162cm Fiberglass poles tunnels and PC every 2.5m inside sew tunnels. poles. 10m P0.3+FG,L10 15m P0.3+FG,L15 20m P0.3+FG,L20 SNOWFENCE is a high vis- ablity allround C-fence that allows wind and 120cm high Snowfence. 50m roll S1.2 L50 snow to pass through. C- With sewn in tunnel every 2.5m. net with 6x3cm mesh in 5m S1.2+L05 7,5m S1.2+L7.5 UV- stabelized high tenec- 10m S1.2+L10 ity Polyethylene, availabe 15m S1.2+L15 20m S1.2+L20 in 1.2 and 0.6m height, on S1.2+PC,L05. 5m long With 160cm Polycarbonate poles roll, with sewn tunnels Snowfence 1.2m high with every 2.5m inside sew tunnels. sewn tunnels and with PC poles. 5m S1.2+PC,L05 and with mounted PC or 7,5m S1.2+PC,L7.5 Fiberglass poles. 10m S1.2+PC,L10 15m S1.2+PC,L15 20m S1.2+PC,L20 With 162cm Fiberglass poles every 2.5m inside sew tunnels. We offer a range of fence Fiberglass (FG) and Polycarbonate (PC) poles and 5m S1.2+FG,L05 hooks to mount C-net on. Either to insert poles in to the sewn net tunnels, or 7,5m S1.2+FG,L7.5 10m S1.2+FG,L10 with hooks. With hooks, C-net on roll can be mounted on to fence poles with 15m S1.2+FG,L15 spacing of choice. Fiberglass poles are stiffer, slightly heavier with less bulk 20m S1.2+FG,L20 and require 19mm drill bit. PC poles are more elastic and lighter and require 32mm drill bit.

60cm high Snowfence. 50m roll S0.6 L50 #44054 Polyfence hook. With sewn in tunnel every 2.5m. 5m S0.6+L05 10m S0.6+L10 20m S0.6+L20

With 95cm Polycarbonate poles every 2.5m inside sew tunnels. 5m S0.6+PC,L05 10m S0.6+PC,L10

, 162cm long 15mm blue Fiberglass pole. With steel pole. blue Fiberglass , 162cm long 15mm 20m S0.6+PC,L20 , 95cm long 15mm Fiberglass pole, blue. With steel blue. pole, , 95cm long 15mm Fiberglass , 162cm long 15mm blue Fiberglass pole. With steel pole. , 162cm long 15mm blue Fiberglass , 95cm long 15mm blue Fiberglass pole, pole, , 95cm long 15mm blue Fiberglass With 95cm Fiberglass poles PC95, 95cm long 32mm PC-pole, red or blue. or blue. red PC95, 95cm long 32mm PC-pole, or blue. red PC160, 160cm long 32mm PC-pole, FGS162H mounted hooks. point and permanently FGS162 point. FGS95H mounted hooks. point and permanent FGS95 With steel point. every 2.5m inside sew tunnels. 5m S0.6+FG,L05 10m S0.6+FG,L10 20m S0.6+FG,L20

C-net with 12x12cm mesh in UV- stabelized high tenacity Polyeth- ylene, availabe in 1.2m height, on C1.2,L25 COARSFENCE 120cm high Coarsefence. roll, with sewn tunnels, and with mounted on fi- 25m roll C1.2 L25 mounted PC or Fiberglass poles. berglass poles with hooks. Backside

Our newly developed Partially of printed banner materials. Digitally Printed Polyfence Printed sections can be placed combines Polyfence 2.5m seg- next to one another, or spaced Partly 50% digital printed fence with sewn in tun- ments with equally 2.5m long apart. Facing the same way, or nels every 2.5m. 10m PP1.2+L10 segments of banner material in oposit directions. 20m PP1.2+L20 that has been digitally printed Partly 50% digitally printed fence with sewn in from both sides, with back side The result is a from both sides tunnel and 160cm Polycarbonate poles every 2.5m. 10m PP1.2+PC,L10 mirrored. Half of the 2.5m great looking, yet very practical 20m PP1.2+PC,L20 segments consists of Polyfence fence. Partly 50% digitally printed fence with sewn in and the remaining segments tunnel and 162cm Fiberglass poles every 2.5m. 10m PP1.2+FG,L10 20m PP1.2+FG,L20

EVENTFENCE 0.6m high with sewn in tunnel Screen printing charges: EVENTFENCE 1.2m high with sewn in tunnel every 2.5m every 2.5m. 5m E0.6+L05 Start cost for less than 10 im- 10m E1.2+L10 10m E0.6+L10 prints: 20m E1.2+L20 EVENTFENCE 0.6m high with sewn in tunnel EVENTFENCE 1.2m high with sewn in tunnel and 160cm Polycarbonate poles every 2.5m. Start cost for more than 10 im- and 160cm Polycarbonate poles every 2.5m. 5m E0.6+PC,L05 prints: 10m E1.2+PC,L10 10m E6.0+PC,L10 20m E1.2+PC,L20 EVENTFENCE 0.6m high with sewn in tunnel Printing cost for prints up to 1.7m EVENTFENCE 1.2m high with sewn in tunnel and 162cm Fiberglass poles every 2.5m. long: and 162cm Fiberglass poles every 2.5m. 5m E0.6+FG,L05 10m E1.2+FG,L10 10m E0.6+FG,L10 Printing cost for prints up tp 2.5m 20m E1.2+FG,L20 long: Digitally printed ban- grommets every 1m. sizes. ners are offerd in any Contact your local length, up to 1.45m We offer banner BAW hight, in durable fence out of Polycar- representative for mesh fabric with bonate poles, in a price offer. metal number of colors and Orange Fluorescent top. Fluorescent Orange top. Fluorescent Orange top. Fluorescent Orange top. Fluorescent Orange top. Fluorescent Orange top. Fluorescent Orange top. Fluorescent Orange .

.

31mm Green 215cm slope marking PC pole with 30cm Orange Fluorescent top. top. Fluorescent PC pole with 30cm Orange 215cm slope marking 31mm Green PC pole with 80cm. . 215cm slope marking 31mm Green 31mm Red 215cm slope marking PC pole with 30cm. 215cm slope marking 31mm Red PC pole with 80cm. 215cm slope marking 31mm Red 31mm Black 215cm slope marking PC pole with 30cm. 31mm Black 215cm slope marking PC pole with 80cm 31mm Black 215cm slope marking 31mm Blue 215cm slope marking PC pole with 30cm. 31mm Blue 215cm slope marking PC pole with 80cm. 31mm Blue 215cm slope marking 31mm Fluorescent Yellow/Black/Orange 215cm caution pole. 215cm caution pole. Yellow/Black/Orange 31mm Fluorescent 31mm Fluorescent Yellow/Black 215cm caution PC pole Yellow/Black 31mm Fluorescent 31mm Red or Blue 215cm PC pole 31mm Red #PC215FYOR #PC215FYOR #PC215FY #215OR30GR #215OR30RD #215OR30BL #215OR30BK #215OR80GR #215OR80RD #215OR80BL #215OR80BK #PC215 Extremely durable polycarbonate slope marking poles! slope marking polycarbonate Extremely durable GS training gate panels. This has been our top seller for many years now. Avail- able in a range of stock fabric colors so that ones course can be found among the many others on glaciers or other training areas with many runs side-by-side. With elastic mounting loops.

BXR99 - 75x50cm, can be screen printed from one side.

BXR299D - New 75x50cm in a light weight all digital printed mesh fabric with ink penetration to backside with about 80% intensity of front side Digitally printed gate panels print. Back side will appear as mirror image of front.

FIS homologated gate panels BXR297D GS, SG & DH. Incorporates sewn in gate tunnel tubing hindering pan- el to bunch up and get stuck Beyond-X offers a comprehensive range of on pole in case of skier get- gate panels for different purposes: ting stuck with arm or underneath panel. Easily mounted with double Bunjy • FIS-homologated GS, SG & DH gate panel. cords. • GS training gate panels. FIS-approved in primarily • SkiX and Snowboard gate panels. blue or red colors only.

• Caution, Information, Advertising, Start BXR97 - 75x50cm, can be screen and/or Finish gate panels in different siz- printed from one side. es. BXR97DD - 75x50cm, double layer fabric that is all digitally printed from These are offered in a variety of digital both sides of panel. (multicolor) or screen printed (single print BXR297D - New 75x50cm in a light color) versions, in single or double sided weight all digital printed mesh fabric panel prints. with ink penetration to backside with about 80% intensity of front side In-house sewing and printing capacity print. Back side will appear as mirror image of front. makes us flexible, fast and extremely re- sponsive. Contact local sales rep. for price quotation. SkiX & Snowboard SL gate panels. Larger sloping gate panels with Bunjy cord mounting to poles.

BXR100 - 100x80x40cm, can be screen printed from one side.

BXR100DD - 100x80x40cm, double layer fabric that is all digi- BXR100 Red tally printed from both sides of panel. Fluorescent colors BXR200D - New 100x80x22cm design in a light weight all digital printed mesh fabric with ink penetration to backside with about 80% intensity of front side print. Back side will appear as mirror im- BXR100 Blue age of front. Available standard gate panel fabric colors.

BAWF250D - New 150x145cm design in a light weight all digital printed mesh fabric Info gate panels. with ink penetration to backside with about Larger size information gate panels with elastic BXR100DD Printed 80% intensity of front side print. Back side mounting pools in all 4 tunnel openings. Ideal will appear as mirror image of front. for info., advertising or caution messages. These BAWF270D - New 130x95cm design in a light gate panels all incorporate a sewn in fiberglass weight all digital printed mesh fabric with ink pole along the upper edge of the panel. penetration to backside with about 80% inten- sity of front side print. Back side will appear as mirror image of front.

BXR200D BAWF90D - 95x115cm, single layer all digital Screen printed gate panels printed gate panel, with none printed back side.

BAWF90DD - 95x115cm, double layer fabric that is all digitally printed from both sides of panel. Both sides will show print design in readable way.

BAWF290D - New 95x115cm design in a light weight all digital printed mesh fabric with ink penetration to backside with about 80% inten- sity of front side print. Back side will appear as mirror image of front.

BAWF90D BAWF96DD - Start/Finish gate panel 70x170cm, double layer fabric that is all digi- tally printed from both sides of panel. Both sides will show print design in readable way.

BAWF296D - New Start/Finish gate panel 70x170cm design in a light weight all digital printed mesh fabric with ink penetration to backside with about 80% intensity of front side print. Back side will appear as mirror im- age of front.

BAWF96DD Alpine stretch bibs are available in 5 differ- ent sizes including FIS size Men’s and Ladies’ race bibs, Kid’s size, a larger Multisport size and the largest Sailing size race bib. They are all produced in high quality very elastic 4-way stretch fabric. Digital printing process allows virtually unlimited number of colors and no order minimums.

This type of race bibs are now spilling over in to a number of other sports. We have even developed a long sleeve race bib for special requirements.

BXR119 Long sleeve stretch bib

BXR108 Snowboard stretch bib

BXR93 Men’s size stretch bib

Men’s size alpine stretch bibs are also Adult students often reject using immensely popular as kids ski school a vest. Then a stretch arm band vests. Helping the ski instructors to keep track of their group. Cool de- BXR130 can be a better solution. Stretch arm band signs and bright colors increases the ski schools attraction. BXR95 Kid’s size BXR94 BXR93 BXR121 stretch bib Ladie’s size Men’s size Sailing size stretch bib stretch bib BXR93 BXR120 stretch bib Men’s size Multisport size stretch bib stretch bib

Race bibs can be used in many dif- ferent ways. Some larger ski clubs need bibs to keep track of their young athletes during training sessions. In the nearby example they have used their club race suit print design in a number of color- ation alternatives to separate one Contact local sales rep. group from another. for price quotation. Race bibs of various types, has become a specialty of our factory. With both sewing as well as screen and digital printing inhouse, almost anything is possible. We have been an active part in changing the world from white bibs with a sponsor logo and digits, to all designed race bibs. The athletes wearing or bibs are fast, and so are we!

BXR104 BXR103 BXR102 Kids size SkiX bib Ladie’s size FIS SkiX bib Men’s size FIS SkiX bib

SkiX race bibs made to FIS specifications for WC- events. Available in FIS men’s and ladies’ sizes as well as kid’s size.

BXR107. Kid’s BXR109 BXR106. Kid’s BXR105 size SkiX bib XS size SkiX bib Men’s size SkiX bib Ladie’s size SkiX bib

Our most popular SkiX race bibs. Commonly used for ski school classes and therefore also offering an ex- tra small kids size. Other popular use is for race crew where the digital printing process allows many alter- native prints with no minimum order requirements. band colors edge Available

BXR105 BXR91 BXR91 Men’s size SkiX bib Stewards bib size XL Stewards bib size L

Stewards bibs greatly enhances the professional ap- Contact info: peal of an event. They make it easy to see who is do- ing what? And they present an additional opportunity to sell in a sponsor. We offer a special Stewards bib available in two sizes or the BXR105 SkiX bib for this purpose.