MiDiv SCCA Time Trial Series /Track Event Tech Worksheet

Name: ______Email: ______SCCA Membership #: ______Phone: (______) ______- ______Car (Year, Make, Model): ______Car Color: ______VIN #: ______Car Number: ______Tech Inspector: ______Date Inspected: ____ / ____ / 2018 TECHNICAL AND SAFETY INSPECTION: TT/TE Participants are solely responsible for the safe condition of the vehicle to be driven to, at and from the event. Additional items may be included as deemed necessary by the inspector to verify the vehicle is in a safe operating condition. Items initialed below are considered passed or failed. Failed items need to be properly attended to before the vehicle will be allowed on track. On-site inspection at events is an additional basic safety and mechanical check. If your is deemed unsafe in the judgment of the event staff on the day of the event, your car will not be allowed on the track.

YES NO Appearance – Neat & clean. showing excessive damage, structural rust, or that do not bear the prescribed identification marks shall not be approved for competition. – 120 mph rated or better unless otherwise specified or controlled & not showing cord at any part of the . Brakes – Pedal operated, working directly on each wheel & in good working order. Rolling brake tests are prohibited. Body Panels – Securely mounted. skirts & hub caps removed. Exhaust System – Directed away from the body & terminates at or behind a point which is equidistant from the front & rear hubs. & Engine Compartment – Hood securely fastened. Battery securely mounted with positive terminal covered. return consistent & positive. Suspension & Steering – Suitable design & in good working order. Leakage & Caps – No visible fluid leaks. Monza (flip top) gas caps are prohibited. Lights – Brake lights operate properly. Seats – Securely mounted. If a folding seat, securely bolted or strapped in place. Passenger Seat – Securely mounted. If a folding seat, securely bolted or strapped in place. Seat Belts & Shoulder Harness – Complies with Sections 4. and 5. Mirrors – Provide driver visibility to the rear of both sides of the car. Driver Safety Equipment – Complies with Section 3. Helmet: Crash helmets approved by the Snell Foundation with Snell sticker 2010 or later Special Application SA2010/SAH2010, or SA2015/SAH2015, or by the SFI with a SFI Sticker SFI 31.1, or by the FIA standard 8860-2004 or later, or British Standards Institute BS6658-85 type A/FR. Transponder (TT ONLY)—Properly secured to car, charged and able to send/receive signal] FUEL Running alcohol or alcohol-blended fuels > 15% (i.e. E85)? If yes, what? ______Decal needed? ___Yes ___No

CAR NUMBERS / CLASS LETTERS /TT SPONSOR STICKERS Car Numbers: Both sides of car; front and rear #s recommended. At least 8” high, with a 1.5” stroke, on a contrasting background. No metallic/reflective. Distance between #s at least as wide as the stroke of the #s. TT Sponsor Stickers : Stickers for all Series sponsors are present according to guidelines. Contingency stickers are not required by the series.

Re-inspection required ______Tech Inspector Signature Date Owner/Driver Signature Date

Reason: ______

Approved ______Tech Inspector Signature Date Owner/Driver Signature Date

It is highly recommended that you check all fluid levels, brake friction parts, brake fluid condition, tires, studs, bearings and all wear parts of you vehicle before arriving at the event. If you feel you are not qualified to evaluate these items, please use a qualified technician. Per the SCCA Rules for Time Trials Events, Tech Inspectors may re-inspect a vehicle at any time. It is ultimately the responsibility of the entrant to keep their vehicle in safe working order.