Virtual International MAGMA User Meeting 2020 October 6-8, 2020, Aachen, Germany

AGENDA Virtual International MAGMA User Meeting 2020 October 6-8, 2020, Aachen, Germany

DAY 1 - Tuesday, October 6, 2020 LIVE SESSION 1 8.45am - 12.15pm (UTC+2)

WELCOME 8.45 - 9.00 WELCOME

Session Die Casting (HPDC) Session Steel Casting ¬ “Variotherm Temperature Control in High 9.00 - 9.30 ¬ “Material- and Process Development for Pressure Die Casting”, Dr. Frank Schmidt, Large Scale Steel Castings on Exam- KSM Castings Group ple of Low Temperature Applications for Oﬀ shore Components by Means of Thermophysical Modelling and Simula- tion”, Reinhold Hanus and Guido Tischler, voestalpine Linz ¬ “Optimization Strategies in HPDC”, Vander- 9.30 - 10.00 ¬ “Beneﬁ ts of Optimization approach in Pinar lei Zalamena, STIHL do Brazil Foundry”, Yücel Aydoğan, Pinar Foundry ¬ “A Practical Experience on Solving HPDC 10.00 - 10.30 ¬ “First Experience with Steel Castings Problems by Stress Analysis & MAGMA- and Magma”, John van Falier, Van Voorden ® SOFT ” Gary/Kuan Ying Chen, Gieterijen B.V. voestalpine China

Break/ Social Activity (Stream) 10.30 - 10.45 Break/ Social Activity (Stream)

¬ “Dimensional Stability of a Structural 10.45 - 11.15 Web Cast Casting through Pre-deﬂ ection of the Die” Steel Casting Dr. Ioan-Horian Stanescu, Volkswagen AG Special guest: Reinhold Hanus, voestalpine ¬ “How to Track Entrapped Air with MAGMA- 11.15 - 11.30 Join our live webcast disscusion and learn SOFT®”, Guido Dietrich, MAGMA Germany “Eﬃ cient Evaluation in the Result Perspec- tive” with Daniel Schmidt, MAGMA Germany 11.30 - 12.00 ¬ “Research and Application of Quantitative Web Cast Criteria for Shrinkage Cavity Defects of Steel Castings Based on MAGMASOFT®” Die Casting (HPDC) Han Tongtong, Erzhong (Deyang) Heavy Guido Dietrich - Q&A “Entrapped Air” Industrial Equipment Co.Ltd Join our live webcast disscusion and learn 12.00 - 12.15 ¬ “Don’t Panic! A Few Remarks on Hot about “Heat Treatment Simulation of Structural Tearing and Residual Stresses” Castings” with Heinz-Jürgen Gaspers, MAGMA Germany Jörg Zimmermann, MAGMA Germany Social Activity (Stream) 12:15 Social Activity (Stream) AGENDA Virtual International MAGMA User Meeting 2020 October 6-8, 2020, Aachen, Germany

DAY 1 - Tuesday, October 6, 2020 LIVE SESSION 2 2.45pm - 6.15pm (UTC+2)

WELCOME 2.45 - 3.00 WELCOME

Session Die Casting (HPDC) Session Steel Casting ¬ “Variotherm Temperature Control in High 3.00 - 3.30 ¬ “Material- and Process Development for Pressure Die Casting”, Dr. Frank Schmidt, Large Scale Steel Castings on Exam- KSM Castings Group ple of Low Temperature Applications for Oﬀ shore Components by Means of Thermophysical Modelling and Simula- tion”, Reinhold Hanus and Guido Tischler, voestalpine Linz ¬ “Optimization Strategies in HPDC”, Vander- 3.30 - 4.00 ¬ “Beneﬁ ts of Optimization Approach in Pinar lei Zalamena, STIHL do Brazil Foundry”, Yücel Aydoğan, Pinar Foundry ¬ “A Practical Experience on Solving HPDC 4.00 - 4.30 ¬ “First Experience with Steel Castings Problems by Stress Analysis & MAGMA- and Magma”, John van Falier, Van Voorden ® SOFT ” Gary/Kuan Ying Chen, Gieterijen B.V. voestalpine China

Break/ Social Activity (Stream) 4.30 - 4.45 Break/ Social Activity (Stream)

¬ “Dimensional Stability of a Structural 4.45 - 5.15 Web Cast Casting through Pre-deﬂ ection of the Die” Steel Casting Dr. Ioan-Horian Stanescu, Volkswagen AG Special guest: Reinhold Hanus, voestalpine ¬ “How to Track Entrapped Air with MAGMA- 5.15 - 5.30 Join our live webcast disscusion and learn SOFT®”, Guido Dietrich, MAGMA Germany “Eﬃ cient Evaluation in the Result Perspec- tive” with Daniel Schmidt, MAGMA Germany 5.30 - 6.00 ¬ “Research and Application of Quantitative Web Cast Criteria for Shrinkage Cavity Defects of Steel Castings Based on MAGMASOFT®” Die Casting (HPDC) Han Tongtong, Erzhong (Deyang) Heavy Guido Dietrich - Q&A “Entrapped Air” Industrial Equipment Co.Ltd Join our live webcast disscusion and learn 6.00 - 6.15 ¬ “Don’t Panic! A Few Remarks on Hot about “Heat Treatment Simulation of Structural Tearing and Residual Stresses” Castings” with Heinz-Jürgen Gaspers, MAGMA Germany Jörg Zimmermann, MAGMA Germany Social Activity (Stream) 6:15 Social Activity (Stream) AGENDA Virtual International MAGMA User Meeting 2020 October 6-8, 2020, Aachen, Germany

DAY 2 - Wednesday, October 7, 2020 LIVE SESSION 1 8.45am - 12.15pm (UTC+2) WELCOME 8.45 - 9.00 WELCOME

Session Cast Iron Session Continuous Casting

¬ “Introduction and Global Roll-out of 9.00 - 9.30 ¬ Experimental Validation of Continuous MAGMASOFT® at Continental”, Casting Simulations, Thien Dang, Trimet Christoph Keil, Continental Teves

¬ “Optimization of Green Sand Thermophys- 9.30 - 10.00 ¬ Simulation-based Analysis for Optimiza- ical Properties for Simulation of Cast Iron tion of Casting Process in AA-7075, Sia- Processes”, Andreas Cziegler, ÖGI mak Raﬁ ezadeh, AMAG casting GmbH

¬ “Using Simulation to Improve CGI Cylinder 10.00 - 10.30 ¬ Stress Calculation with MAGMA CC, Erik Head Quality”, João Guilherme Kress Hardt, Hepp, MAGMA Germany Tupy Brazil

Break/ Social Activity (Stream) 10.30 - 10.45 Break/ Social Activity (Stream) ¬ “Simulating Core Gas Defects”, Mathias 10.45 - 11.15 Bodenburg, MAGMA GmbH Web Cast Continuous Casting ¬ “Tips & Tricks” 11.15 - 11.30 Special guest: Andrew McFarlane, AMETEX Mathias Bodenburg, MAGMA Germany

11.30 - 12.00 ¬ First Set Up of DC Casting Project, Web Cast David Jelinek, MAGMA Czech Republic Cast Iron 12.00 - 12.15 ¬ Tips and Tricks, Constantino Krafthöfer, MAGMA Germany

Social Activity (Stream) 12:15 Social Activity (Stream) AGENDA Virtual International MAGMA User Meeting 2020 October 6-8, 2020, Aachen, Germany

DAY 2 - Wednesday, October 7, 2020 LIVE SESSION 2 2.45pm - 6.15pm (UTC+2) WELCOME 2.45 - 3.00 WELCOME

Session Cast Iron Session Continuous Casting

¬ “Introduction and Global Roll-out of 3.00 - 3.30 ¬ Experimental Validation of Continuous MAGMASOFT® at Continental”, Casting Simulations, Thien Dang, Trimet Christoph Keil, Continental Teves

¬ “Optimization of Green Sand Thermophys- 3.30 - 4.00 ¬ Simulation-based Analysis for Optimiza- ical Properties for Simulation of Cast Iron tion of Casting Process in AA-7075, Sia- Processes”, Andreas Cziegler, ÖGI mak Raﬁ ezadeh, AMAG casting GmbH

¬ “Using Simulation to Improve CGI Cylinder 4.00 - 4.30 ¬ Stress Calculation with MAGMA CC, Erik Head Quality”, João Guilherme Kress Hardt, Hepp, MAGMA Germany Tupy Brazil

Break/ Social Activity (Stream) 4.30 - 4.45 Break/ Social Activity (Stream) ¬ “Simulating Core Gas Defects”, Mathias 4.45 - 5.15 Bodenburg, MAGMA GmbH Web Cast Continuous Casting ¬ “Tips & Tricks” 5.15 - 5.30 Mathias Bodenburg, MAGMA Germany Special guest: Andrew McFarlane, AMETEX

5.30 - 6.00 ¬ First Set Up of DC Casting Project, Web Cast David Jelinek, MAGMA Czech Republic

Cast Iron 6.00 - 6.15 ¬ Tips and Tricks, Constantino Krafthöfer, MAGMA Germany

Social Activity (Stream) 6:15 Social Activity (Stream) AGENDA Virtual International MAGMA User Meeting 2020 October 6-8, 2020, Aachen, Germany

DAY 3 - Thursday, October 8, 2020 LIVE SESSION 1 8.45am - 12.15pm (UTC+2) WELCOME 8.45 - 9.00 WELCOME

Session Non-Ferrous Applications Session Core Making Processes

¬ “Life Cyle of Sand Cores”, 9.00 - 9.30 ¬ “Life Cyle of Sand Cores”, Jesper Thorborg, MAGMA Germany Jesper Thorborg, MAGMA Germany

¬ “Microporosity Analysis in Steel and Alumi- ¬ “Virtual Core Shooting Machine - What 9.30 - 10.00 num Castings”, is Behind the Process”, Gabriel Moraes, MAGMA Brasil Lubos Pavlak, MAGMA Germany

¬ “Utilization of MAGMA Thermal Analysis 10.00 - 10.30 ¬ “Cycle Time Reduction”, Using MAGMAnonferrous”, Mauricio Velazquez, MAGMA USA Petr Kotas, MAGMA Czech Republic

Break/ Social Activity (Stream) 10.30 - 10.45 Break/ Social Activity (Stream)

¬ “Using the MAGMASOFT® Module 10.45 - 11.15 MAGMAlpdc”, Simon Olive, MAXIMA Web Cast

¬ “Binder Degredation”, Constantino 11.15 - 11.30 Core Making Processes Krafthöfer, MAGMA Germany

11.30 - 12.00 ¬ “Core in Core”, Janez Pristavec, Exoterm Web Cast Non-Ferrous Application 12.00 - 12.15 ¬ “Reliable Prediction of Core Box Wear”, Ingo Wagner, MAGMA Germany

Social Activity (Stream) 12:15 Social Activity (Stream) AGENDA Virtual International MAGMA User Meeting 2020 October 6-8, 2020, Aachen, Germany

DAY 3 - Thursday, October 8, 2020 LIVE SESSION 2 2.45pm - 6.15pm (UTC+2) WELCOME

2.45 - 3.00 WELCOME

Session Non-Ferrous Applications Session Core Making Processes

¬ “Life Cyle of Sand Cores”, 3.00 - 3.30 ¬ “Life Cyle of Sand Cores”, Jesper Thorborg, MAGMA Germany Jesper Thorborg, MAGMA Germany

¬ “Microporosity Analysis in Steel and Alumi- 3.30 - 4.00 ¬ “Virtual Core Shooting Machine - What num Castings”, is Behind the Process”, Gabriel Moraes, MAGMA Brasil Lubos Pavlak, MAGMA Germany

¬ “Utilization of MAGMA Thermal Analysis 4.00 - 4.30 ¬ “Cycle Time Reduction”, Using MAGMAnonferrous”, Mauricio Velazquez, MAGMA USA Petr Kotas, MAGMA Czech Republic

Break/ Social Activity (Stream) 4.30 - 4.45 Break/ Social Activity (Stream)

¬ “Using the MAGMASOFT® Module 4.45 - 5.15 MAGMAlpdc”, Simon Olive, MAXIMA Web Cast “Binder Degredation”, Constantino ¬ 5.15 - 5.30 Core Making Processes Krafthöfer, MAGMA Germany

5.30 - 6.00 ¬ “Core in Core”, Janez Pristavec, Exoterm Web Cast

Non-Ferrous Application 6.00 - 6.15 ¬ “Reliable Prediction of Core Box Wear”, Ingo Wagner, MAGMA Germany

Social Activity (Stream) 6:15 Social Activity (Stream)