SeaCure Custom Mouthpiece - Regulator Size Chart Feb 2014

For the most up to date information, visit our website, www.seacure1.com

SeaCure 1 – fits standard orifice regulators (size 1-1/8” x 1/2”)

APOLLO AQUA LUNG– older metal regulators, Conshelf 7 through 21 - snug ATOMIC – manufactured pre 2005 only and newer T3 Evolution, Iceberg & , VXT8, VXT Octo, VX4, VX80 CRESSI-SUB (Ellipse is a snug fit) DACOR - after 1992 IST (except Proline is a II) OCEAN MASTER PRO SUB (Avalon) SCUBA PRO (all models before the A700 including the S600 and the newer R095) SEAC SHERWOOD (most early models/Brut/Shadow/MagnumII/Oasis/pre 1992 Blizzard) SPARE AIR SUBGEAR TABATA/TUSA (not TUSA Imprix)

SeaCure 2 – fits intermediate size orifice regulators (size 1-3/16” x 5/8”)

AERIS AQUA LUNG newer, including Titan, Legend, Kronos ATOMIC – must measure or try on, pre 2005 use a I, newer,larger orifice a II BEUCHAT VS3, VS4, VS8, VX10 DACOR Viper + Eagle DIVE RITE, including O2ptima , but not the Jet Stream 4500 EPIC EDGE + HOG FORTE GENESIS HALCYON REBREATHER HOLLIS (except 500SE is a 4) Snorkels – SeaCure fits many removable INNERSPACE Megalodon rebreather mouthpiece snorkels on the market -newer models (but not MARES MR-12-II, III, IV or V) OCEAN EDGE Size 1 – Amico, Coral, Cressisub, Dacor, OCEAN Dive Buddy, Kapitol Reef, Netex, Oceanic, OCEANIC (cannot fit Zeta) Reef Buddy, SeaQuest ODYSSEY SCUBA MAX Size 2 – Chiaro, H2Odyssey, IDI, SCUBAPRO (models after 2010, including A700,C200,C300,G260,R195) Parkway, Pic, Technisub SEA ELITE SHERWOOD (Maximus,Oasis, 2/92 and newer Blizzard, SR1) Size 3 – AquaLung Impulse, SeaVision SPORASUB TIGULLIO TILOS XS SCUBA (previously IDI, Osprey is a I)

SeaCure 3 – same diameter as a size I with double retention ribbing

AQUA LUNG older plastic regulators including Micra (these regulators do not have the conventional retention lip on the mouthpiece orifice common to all other regulators and therefore no other SeaCure model should be used) AQUATEC

NEW – SPECIALTY SIZES

SeaCure 4 (size 1 5/16” x 11/16”) – fits , Hollis 500SE and Zeagle regulators and many , including Golem Shrimp BOV, Hollis Prism, ISC Megladon, Kiss Gem, Poseidon and Titan

SeaCure 5 (size 1 7/16” x 13/16”) – fits POSEIDON regulators

NOTE – If not sure of the correct size, simply measure the orifice of the regulator or rebreather (outside edge, top to bottom and side to side), or try it on.