POWERHUB2 Power Distribution Module [96mm] 3.8in.
[79mm] 3.1in. [80mm] 3.1in.
[96mm] 3.75in.
[95mm] 3.75in. [95mm] 3.75in.
[99mm] 4in. [65mm] 2.6in. [108mm] 4.2in. [108mm]
[60mm] 2.4in.
[55mm] 2.2in. [85mm] 3.3in.
[60mm] 2.4in.
[43mm] 1.7in. [67mm] 2.6in.
Suzuki Boulevard C90
Shown with: Chrome DR1 Single-Intensity Lights Chrome DM Micro Single-Intensity Lights DOT Headlight Replacement Module
TwistedThrottle.com | 9 Model-specific mounting solutions for every bike in your garage.
Honda NC700X shown with Denali D4 lights on crashbar mounts and Denali D2 lights on fender mounts. KTM 690 SMC shown with Denali DR1 lights on fork tube mounts. BMW S1000RR shown with Denali DM Micro lights on fender mounts.
TwistedThrottle.com | 13 LED Light Kits /// Application and Mounting Guide Universal Fender Mount (DM)
// Compatible with DM lights // Fits all motorcycles with an M5 or M6 front fender mounting point // Lowest profile mounting option // Single axis of adjustability (up/down)
$17.99 SKU: LAH.00.10100 Universal Fender Mount (D2)
// Compatible with D2 lights // Fits all motorcycles with an M5 or M6 front fender mounting point // Lowest profile mounting option // Single axis of adjustability (up/down)
$26.99 SKU: LAH.00.10200 Engine Guard/Crashbar Mount
// Compatible with DM, D2, DX, D4, DR1 lights // Fits all engine guards and crashbars from 22mm to 29mm (7/8” to1 1/8”) // Includes rotatable mounting shelf
$74.99 SKU: LAH.00.10300.B Engine Guard/Frame Mount
// Compatible with DM, D2, DX, D4, DR1 lights // Fits all engine guards and frame tubes from 32mm to 38mm (1 1/4” to1 1/2”) // Includes rotatable mounting shelf // Available in Chrome
$77.99 SKU: LAH.00.10400.B Conventional Fork Tube Mount
// Compatible with DM, D2, DX, D4, DR1 lights // Fits all fork tubes from 39mm to 49mm (1 1/2” to1 7/8”) // Includes rotatable mounting shelf // Available in Chrome
$79.99 SKU: LAH.00.10600.B Inverted Fork Tube Mount
// Compatible with DM, D2, DX, D4, DR1 lights // Fits all fork tubes from 50mm to 60mm (2” to2 3/8”) // Includes rotatable mounting shelf
$79.99 SKU: LAH.00.10500.B Universal Offset Fairing Mount
// Compatible with DM, D2, DX, D4, DR1 lights // Fits all motorcycles with an M5, M6, or M8 fender or fairing mounting points // Three axis of adjustability ( front/back, left/right, up/down)
$49.99 SKU: LAH.00.10000 Bike Specific Fairing Mount
// Compatible with DM, D2, DX, D4, DR1 lights // Ideal mounting location for auxiliary driving lights // See application chart for your bike model // Two axis of adjustability (left/right, up/down)
$29.99-$69.99 Example Bike Specific Mounting Bracket Kit
Yamaha Super Teneree SKU: LAH.06.10000 Bike Specific Fairing Mount // Examples
BMW G650/F650 GS DUCATI Multistrada Yamaha Super Teneree SKU: LAH.07.10600 SKU: LAH.22.10000 SKU: LAH.06.10000
HONDA NC700 SUZUKI DL650 (gen 1) KTM 990 Adventure SKU: LAH.01.10000 SKU: LAH.05.10000 SKU: LAH.04.10000
TRIUMPH TIGER 800 KAWASAKI KLR 650 SUZUKI DL650 (gen 1) SKU: LAH.11.10000 SKU: LAH.08.10000 SKU: LAH.05.10100
BMW R1200GS BMW F800GS BMW R1200GS LC SKU: LAH.07.10300 SKU: LAH.07.10100 SKU: LAH.07.10400
BMW K1600 GT KAWASAKI Versys (gen 1) TRIUMPH TIGER 1200 SKU: LAH.07.10200 SKU: LAH.08.10100 SKU: LAH.11.10100
APPLICATION GUIDE BMW R1200GS LC 2013-2016
9. PowerHub2 Fuse/Ground Block
5. SWITCH MOUNT (For Horizontal Perch Bolts) 9. POWERHUB 2 (Power Distribution Module) 6. BIKE SPECIFIC HORN MOUNT (FITS COMPACT HORN) ELC.00.30000...... $129.99
DM LED Light Kit
3. BIKE SPECIFIC DMDM FAIRING MOUNT (DM LIGHTS ONLY) 1. BIKE SPECIFIC FAIRING MOUNT D44 (FITS ALL LIGHTS) TT-DM...... $249.99
D2 LED Light Kit 5. Switch Mount (Flat) 7.7 HORHORNORN (So(SoundBombundBomb Compact)Comppapa
2. CRASHBAR MOUNT (FITS ALL LIGHTS)
MBK.00.10100 (Single) ...... $11.99 TT-D2...... $379.99 MBK.00.10200 (Double)...... $11.99 D2D2 DR1 LED Light Kit 6. Bike Specific Horn Mount 4. UNIVERSAL FENDER MOUNT DMDM (FITS DM & D2 LIGHTS)
TT-DR1...... $349.99 HMT.07.10400...... $18.99
DX LED Light Kit 7. SoundBomb Compact Horn 3. Bike Specific Fairing Mount
! Plug & Play Adapters Horn Harness...... DNL.ELC.10000 BMW Horn Connector...... DNL.WHS.10100 BMW GPS Power Tap...... DNL.WHS.10000 TT-DX...... $389.99 TT-SB.10000...... $49.99 LAH.DM.07.10000...... $39.99
D4 LED Light Kit 8. SoundBomb Mini Horn 4. Universal Fender Mount 2. Crash Bar Light Mount 1. Bike Specific Fairing Mount BE SEEN - BE HEARD - BE SAFE DENALI offers complete solutions specific to your vehicle so you can go farther, see more, and get home safe. To create the optimum lighting and visibility package mount long distance spot lights higher up for night time riding, mount smaller yet super bright wide angle lights lower down to increase day time visibility & night time fill, and add a ridiculously loud horn...of course. Choose among our 5 lights and 3 horns to create the perfect solution for your riding style. LAH.00.10100 (DM)...... $24.99 TT-D4...... $309.99 TT-SB.10200...... $29.99 LAH.00.10200 (D2)...... $39.99 LAH.00.10300...... $74.99 LAH.07.10400...... $62.99 BMW K1600GT/GTL APPLICATION GUIDE 2012-2016
9. PowerHub2 Fuse/Ground Block
3. SWITCH MOUNT (For Horizonal Perch Bolts)
ELC.00.30000...... $129.99
9. POWERHUB 2 DM LED Light Kit (Power Distribution Module) 2. BIKE SPECIFIC FAIRING MOUNT (FITS ALL LIGHTS) DR1
TT-DM...... $249.99
BIKE SPECIFIC 6. 5. Switch Mount (Flat) D2 LED Light Kit HORN MOUNT (FITS SPLIT HORN)
7. HORN (SoundBomb Split)
MBK.00.10100 (Single) ...... $11.99 MBK.00.10200 (Double)...... $11.99 TT-D2...... $379.99
3. CRASHBAR MOUNT 6. Bike Specific Horn Mount DR1 LED Light Kit (FITS ALL LIGHTS) D2
DM
1. BIKE SPECIFIC FENDER MOUNT (FITS ALL LIGHTS)
HMT.07.10500...... In Development TT-DR1...... $349.99
3. Crash Bar Light Mount 7. SoundBomb Compact Horn DX LED Light Kit
! Plug & Play Adapters Horn Harness...... DNL.ELC.10000 BMW Horn Connector...... DNL.WHS.10100 BMW GPS Power Tap...... DNL.WHS.10000 BE SEEN - BE HEARD - BE SAFE LAH.00.10300...... $74.99 TT-SB.10000...... $49.99 TT-DX...... $389.99
DENALI offers complete solutions specific to your vehicle so you can go further, see 1. Bike Specific Fender Mount 2. Bike Specific Fairing Mount 4. Universal Fender Mount 8. SoundBomb Mini Horn D4 LED Light Kit more, and get home safe. To create the optimum lighting and visibility package mount long distance spot lights higher up for night time riding, mount smaller yet super bright wide angle lights lower down to increase day time visibility & night time fill, and add a ridiculously loud horn...of course. Choose between our 5 lights and 3 horns to create the perfect solution for your riding style.
LAH.00.10100 (DM)...... $24.99 version 06.30.16 LAH.07.10200...... $59.99 LAH.07.10800...... In Development LAH.00.10200 (D2)...... $39.99 TT-SB.10200...... $29.99 TT-D4...... $309.99
1 2 3 4 D2 LED light Pod Hinge Link Socket Head Screw 40° Optic DENALIMotorcycle Lighting & Electronics
Denali D2 LED Driving Lights 10° Optic Installed M3x20...... DIN 912 Dual Intensity Kit Contents Qty...... 2 Qty...... 2 Qty...... 2 Qty...... 2 TT-D2 Instruction Rev: 01 6 7 8 PLEASE READ BEFORE INSTALLING 5“U” Bracket Hinge Hex Head Screw Lock Nut (M6) Hex Head Screw TWISTED THROTTLE products should be installed by a qualified, experienced motorcycle technician. If you are unsure of your ability to properly install a product, please have the product installed by your local motorcycle dealer. TWISTED THROTTLE takes no responsibility for damages caused by improper installation. M8 through hole M6x35...... DIN 933 M6...... DIN 985 M8x16...... DIN 933 All screws, bolts, and nuts, including all replacement Qty...... 2 Qty...... 2 Qty...... 2 hardware provided by TWISTED THROTTLE should Qty...... 2 be tightened to the torque specified in the OEM maintenance manual for your motorcycle. If no torque specifications are provided in the OEM maintenance manual, the following torques may be 9 10 11 Dual Intensity 12 Lock Nut (M8) used: Plastic Nut Cap Wiring Harness Posi-Tap Connector
M5...... 3.5 ft-lbs (5 Nm) M6...... 7 ft-lbs (9.6 Nm) M8...... 13 ft-lbs (18 Nm)
All screws, bolts, and nuts should be checked after M8...... DIN 985 5 Amp Fuse driving the first 30 miles (50 km) to ensure that all Qty...... 2 Qty...... 1 Qty...... 2 are tightened to the proper torque. Qty...... 2
Medium strength liquid thread-locker (i.e., "Locktite") should be used to secure all screws, bolts, and nuts. 13 14 Distributed by: Allen Key Zip Tie Twisted Throttle LLC phone: 401.284.4200 570 Noose Neck Rd fax: 401.223.6955 Exeter, RI 02822 www.twistedthrottle.com
WARNING! – Only use the included wiring harness to wire Denali lights. Even though the plug may be similar to other wiring, Denali lights have unique circuitry that can easily be damaged by using wiring 2.5mm other than the included harness. Qty...... 4 Qty...... 1 Mounting Instructions DENALIMotorcycle Lighting & Electronics
3
1 2
6 7
5
8 1
9
10 3
2
Example Mounting Bracket
DENALI // D2 LED Dual Intensity Driving Lights // TT-D2.KIT Wiring Instructions DENALIMotorcycle Lighting & Electronics
Wiring Option One: Standard Dual Intensity (high and low)
Function: In this wiring configuration, Denali D2 lights will function perfectly in sync with your original headlight. The D2 low beam (40% intensity) will come on when your motorcycle is turned on, and the D2 high beam (100% intensity) will come on when you switch your high beams on. To turn the D2 light system off entirely, simply press the lighted on/off switch.
How to Wire: (1) Attach the positive and negative ring terminals to the battery.
(2) Identify the white wire (switched power) . Use one posi-tap connector to tap the white wire into the motorcycles low beam headlight wire. If your bike has a dual filament bulb (H4, Hs1) you will need to tap into any switched 12 volt power source. For example, your motorcycles running light wire or dash light wire are a switched 12 volt power source.
(3) Identify the blue wire (100% intensity trigger). Use one posi-tap connector to tap the blue wire into the high beam headlight wire of your motorcycle.
(4) Connect the D2 Lights and mount the switch. Check to make sure they are functioning properly. Make sure all wires and switch are properly routed from the battery to the lights avoiding hot surfaces, sharp objects, and moving parts.
Note: Universal and bike specific mounting kits are available at twisted throttle.com. Additional wiring options are possible. Visit twistedthrottle.com/denalid2 to view an installation tutorial.
Wiring Diagram (Dual Intensity) Note: This drawing is not to scale. Components are enlarged for illustrative purposes only. 100% Intensity Trigger Wire Motorcycle Headlight High Beam Wire Posi -Tap
Switched 12 volt Power Wire Motorcycle Running Light Wire Posi -Tap ( or any switched 12 volt power source)
F M
Lighted on/off Button
M F M F D2 Light Negative (Ground) Controller Box
M F Positive M F 5 D2 Light AMP
BATTERY
DENALI // D2 LED Dual Intensity Driving Lights // TT-D2 WARNING! – If mounting the lights to the front fender, forks, or fairing, turn the handlebars fully left and right and fully compress & uncompress the suspension to ensure the wires will not bind and have enough slack for your motorcycle to operate properly. Wiring Instructions DENALIMotorcycle Lighting & Electronics Wiring Option Two: Full Intensity (no low beam)
Function: In this wiring configuration, Denali D2 lights will function at 100% intensity (high beam) independent of your motorcycles original headlight. The integrated switch will allow you to turn your D2 lights on and off at 100% intensity only.
How to Wire: (1) Attach the positive and negative ring terminals to the battery.
(2) Identify the white wire (switched power) and the blue wire (100% intensity trigger).
(3) Twist the exposed ends of the two wires together, then fasten both wires through the small end of one posi-tap connector. Tap the combined blue and white wire into the motorcycles low beam headlight wire or any switched 12 volt power wire (a rear running light wire or dash light wire would also work)
(4) Connect the D2 Lights and mount the switch. Check to make sure they are functioning properly. Make sure all wires and switch are properly routed from the battery to the lights avoiding hot surfaces, sharp objects, and moving parts. If mounting the lights to the front fender, forks, or fairing, turn the handlebars fully left and right and fully compress & uncompress the suspension to ensure the wires will not bind and have enough slack for your motorcycle to operate properly.
Note: Universal and bike specific mounting kits are available at twisted throttle.com. Additional wiring options are possible. Visit twistedthrottle.com/denalid2 to view an installation tutorial.
Wiring Diagram (Full Intensity) Note: This drawing is not to scale. Components are enlarged for illustrative purposes only. 100% Intensity Trigger Wire
Switched 12 volt Power Wire Motorcycle Headlight Low beam Wire Posi -Tap (or any switched 12 volt power source)
F M
Lighted on/off Button
M F M F D2 Light Negative (Ground) Controller Box
M F Positive M F 5 D2 Light AMP
BATTERY
DENALI // D2 LED Dual Intensity Driving Lights // TT-D2 WARNING! – If mounting the lights to the front fender, forks, or fairing, turn the handlebars fully left and right and fully compress & uncompress the suspension to ensure the wires will not bind and have enough slack for your motorcycle to operate properly.