Yocto Project Development Manual [ from the Yocto Project Website

Total Page:16

File Type:pdf, Size:1020Kb

Yocto Project Development Manual [ from the Yocto Project Website Scott Rifenbark, Intel Corporation <[email protected]> by Scott Rifenbark Copyright © 2010-2014 Linux Foundation Permission is granted to copy, distribute and/or modify this document under the terms of the Creative Commons Attribution-Share Alike 2.0 UK: England & Wales [http://creativecommons.org/licenses/by-sa/2.0/uk/] as published by Creative Commons. Note For the latest version of this manual associated with this Yocto Project release, see the Yocto Project Development Manual [http://www.yoctoproject.org/docs/1.7/dev-manual/dev-manual.html] from the Yocto Project website. Table of Contents 1. The Yocto Project Development Manual .................................................................................. 1 1.1. Introduction ................................................................................................................. 1 1.2. What This Manual Provides .......................................................................................... 1 1.3. What this Manual Does Not Provide ............................................................................. 1 1.4. Other Information ........................................................................................................ 2 2. Getting Started with the Yocto Project .................................................................................... 4 2.1. Introducing the Yocto Project ....................................................................................... 4 2.2. Getting Set Up ............................................................................................................ 4 2.3. Building Images ........................................................................................................... 7 2.4. Using Pre-Built Binaries and QEMU ............................................................................... 7 3. The Yocto Project Open Source Development Environment ...................................................... 9 3.1. Open Source Philosophy .............................................................................................. 9 3.2. Using the Yocto Project in a Team Environment ............................................................ 9 3.2.1. System Configurations ...................................................................................... 9 3.2.2. Source Control Management (SCM) ................................................................. 10 3.2.3. Autobuilders ................................................................................................... 11 3.2.4. Policies and Change Flow ................................................................................ 11 3.2.5. Summary ........................................................................................................ 12 3.3. Yocto Project Source Repositories ............................................................................... 12 3.4. Yocto Project Terms .................................................................................................... 14 3.5. Licensing ................................................................................................................... 17 3.6. Git ............................................................................................................................. 18 3.6.1. Repositories, Tags, and Branches .................................................................... 18 3.6.2. Basic Commands ............................................................................................ 19 3.7. Workflows .................................................................................................................. 20 3.8. Tracking Bugs ............................................................................................................ 22 3.9. How to Submit a Change ........................................................................................... 23 3.9.1. Using Scripts to Push a Change Upstream and Request a Pull ........................... 25 3.9.2. Using Email to Submit a Patch ........................................................................ 25 4. Common Development Models ............................................................................................. 27 4.1. System Development Workflow .................................................................................. 27 4.1.1. Developing a Board Support Package (BSP) ..................................................... 27 4.1.2. Modifying the Kernel ....................................................................................... 30 4.2. Application Development Workflow ............................................................................ 34 4.2.1. Workflow Using the ADT and Eclipse™ ............................................................ 34 4.2.2. Working Within Eclipse .................................................................................... 37 4.2.3. Workflow Using Stand-Alone Cross-Development Toolchains ............................. 45 4.3. Modifying Temporary Source Code ............................................................................. 46 4.3.1. Finding the Temporary Source Code ................................................................ 46 4.3.2. Using a Quilt Workflow .................................................................................... 47 4.3.3. Using a Git Workflow ...................................................................................... 48 4.4. Image Development Using Hob .................................................................................. 50 4.5. Using a Development Shell ........................................................................................ 50 5. Common Tasks ..................................................................................................................... 52 5.1. Understanding and Creating Layers ........................................................................... 52 5.1.1. Layers ............................................................................................................ 52 5.1.2. Creating Your Own Layer ................................................................................ 52 5.1.3. Best Practices to Follow When Creating Layers ................................................ 54 5.1.4. Enabling Your Layer ........................................................................................ 55 5.1.5. Using .bbappend Files ..................................................................................... 56 5.1.6. Prioritizing Your Layer ..................................................................................... 57 5.1.7. Managing Layers ............................................................................................ 58 5.1.8. Creating a General Layer Using the yocto-layer Script ..................................... 59 5.2. Customizing Images .................................................................................................. 60 5.2.1. Customizing Images Using local.conf ........................................................... 60 5.2.2. Customizing Images Using Custom IMAGE_FEATURES and EXTRA_IMAGE_FEATURES ............................................................................................ 61 5.2.3. Customizing Images Using Custom .bb Files .................................................... 61 5.2.4. Customizing Images Using Custom Package Groups ......................................... 62 5.3. Writing a New Recipe ................................................................................................ 62 5.3.1. Overview ........................................................................................................ 63 iii Yocto Project Development Manual 5.3.2. Locate a Base Recipe ..................................................................................... 63 5.3.3. Storing and Naming the Recipe ....................................................................... 64 5.3.4. Understanding Recipe Syntax .......................................................................... 65 5.3.5. Running a Build on the Recipe ........................................................................ 68 5.3.6. Fetching Code ................................................................................................. 69 5.3.7. Unpacking Code .............................................................................................. 70 5.3.8. Patching Code ................................................................................................ 71 5.3.9. Licensing ........................................................................................................ 71 5.3.10. Configuring the Recipe .................................................................................. 72 5.3.11. Compilation .................................................................................................. 73 5.3.12. Installing ....................................................................................................... 73 5.3.13. Enabling System Services ............................................................................. 74 5.3.14. Packaging ..................................................................................................... 75 5.3.15. Properly Versioning Pre-Release Recipes ........................................................ 76 5.3.16. Post-Installation Scripts ................................................................................
Recommended publications
  • UEFI Porting Update for ARM Platforms
    UEFI Porting Update for ARM Platforms What did we do since July? presented by Leif Lindholm UEFI tech lead Linaro Enterprise Group UEFI Plugfest – May 2014 Agenda Introduction Linux Support EDK2 Development SCT Platforms Tree Future Work The UEFI Forum www.uefi.org 2 Introduction Last year, Grant Likely presented an overview of the types of things we were planning to do. Since then, we have done various things... The UEFI Forum www.uefi.org 3 Linux Support The UEFI Forum www.uefi.org 4 Linux Support The big topic since the last Linaro Connect event has been Linux support: Runtime Services UEFI stub loader Co-existence of ACPI/FDT The UEFI Forum www.uefi.org 5 Runtime Services Runtime services support for both 32-bit and 64-bit ARM Not yet upstream, but aiming for Linux kernel v3.16 This included reworking of common code, since some functionality was already duplicated between x86/ia64 Main purpose is enabling GetVariable()/SetVariable() Enables bootloader installer to add boot entries, and update bootorder, from within Linux The UEFI Forum www.uefi.org 6 Linux UEFI stub loader The “stub loader” is the mechanism by which the Linux kernel can be loaded directly from UEFI, as a UEFI application Becoming the default mechanism on x86(/x64) platforms. Enables the use of more light-weight bootloaders, like gummiboot or rEFInd Not yet upstream, but aiming for 3.16 Majority of code shared between arm/arm64, and a fair bit shared with x86 The UEFI Forum www.uefi.org 7 ACPI vs. FDT A slightly contentious issue with existing ARM Linux developers
    [Show full text]
  • Embedded Linux Systems with the Yocto Project™
    OPEN SOURCE SOFTWARE DEVELOPMENT SERIES Embedded Linux Systems with the Yocto Project" FREE SAMPLE CHAPTER SHARE WITH OTHERS �f, � � � � Embedded Linux Systems with the Yocto ProjectTM This page intentionally left blank Embedded Linux Systems with the Yocto ProjectTM Rudolf J. Streif Boston • Columbus • Indianapolis • New York • San Francisco • Amsterdam • Cape Town Dubai • London • Madrid • Milan • Munich • Paris • Montreal • Toronto • Delhi • Mexico City São Paulo • Sidney • Hong Kong • Seoul • Singapore • Taipei • Tokyo Many of the designations used by manufacturers and sellers to distinguish their products are claimed as trademarks. Where those designations appear in this book, and the publisher was aware of a trademark claim, the designations have been printed with initial capital letters or in all capitals. The author and publisher have taken care in the preparation of this book, but make no expressed or implied warranty of any kind and assume no responsibility for errors or omissions. No liability is assumed for incidental or consequential damages in connection with or arising out of the use of the information or programs contained herein. For information about buying this title in bulk quantities, or for special sales opportunities (which may include electronic versions; custom cover designs; and content particular to your business, training goals, marketing focus, or branding interests), please contact our corporate sales depart- ment at [email protected] or (800) 382-3419. For government sales inquiries, please contact [email protected]. For questions about sales outside the U.S., please contact [email protected]. Visit us on the Web: informit.com Cataloging-in-Publication Data is on file with the Library of Congress.
    [Show full text]
  • Introduction to the Yocto Project / Openembedded-Core
    Embedded Recipes Conference - 2017 Introduction to the Yocto Project / OpenEmbedded-core Mylène Josserand Bootlin [email protected] embedded Linux and kernel engineering - Kernel, drivers and embedded Linux - Development, consulting, training and support - https://bootlin.com 1/1 Mylène Josserand I Embedded Linux engineer at Bootlin since 2016 I Embedded Linux expertise I Development, consulting and training around the Yocto Project I One of the authors of Bootlin’ Yocto Project / OpenEmbedded training materials. I Kernel contributor: audio driver, touchscreen, RTC and more to come! embedded Linux and kernel engineering - Kernel, drivers and embedded Linux - Development, consulting, training and support - https://bootlin.com 2/1 I Understand why we should use a build system I How the Yocto Project / OpenEmbedded core are structured I How we can use it I How we can update it to fit our needs I Give some good practices to start using the Yocto Project correctly I Allows to customize many things: it is easy to do things the wrong way I When you see a X, it means it is a good practice! Introduction I In this talk, we will: - Kernel, drivers and embedded Linux - Development, consulting, training and support - https://bootlin.com 3/1 I How the Yocto Project / OpenEmbedded core are structured I How we can use it I How we can update it to fit our needs I Give some good practices to start using the Yocto Project correctly I Allows to customize many things: it is easy to do things the wrong way I When you see a X, it means it is a good practice!
    [Show full text]
  • Hands-On Kernel Lab
    Hands-on Kernel Lab Based on the Yocto Project 1.4 release (dylan) April 2013 Tom Zanussi <[email protected]> Darren Hart <[email protected]> Introduction Welcome to the Yocto Project Hands-on Kernel Lab! During this session you will learn how to work effectively with the Linux kernel within the Yocto Project. The 'Hands-on Kernel Lab' is actually a series of labs that will cover the following topics: • Creating and using a traditional kernel recipe (lab1) • Using 'bitbake -c menuconfig' to modify the kernel configuration and replace the defconfig with the new configuration (lab1) • Adding a kernel module to the kernel source and configuring it as a built-in module by adding options to the kernel defconfig (lab1) • Creating and using a linux-yocto-based kernel (lab2) • Adding a kernel module to the kernel source and configuring it as a built-in module using linux-yocto 'config fragments' (lab2) • Using the linux-yocto kernel as an LTSI kernel (configuring in an item added by the LTSI kernel which is merged into linux-yocto) (lab2) • Using an arbitrary git-based kernel via the linux-yocto-custom kernel recipe (lab3) • Adding a kernel module to the kernel source of an arbitrary git-based kernel and configuring it as a loadable module using 'config fragments' (lab3) • Actually getting the module into the image and autoloading it on boot (lab3) • Using a local clone of an arbitrary git-based kernel via the linux-yocto- custom kernel recipe to demonstrate a typical development workflow (lab4) • Modifying the locally cloned custom
    [Show full text]
  • OS Selection for Dummies
    OS SELECTION HOW TO CHOOSE HOW TO CHOOSE Choosing your OS is the first step, so take the time to consider your choice fully. There are many parameters to take into account: l Is this a new project or the evolution of an existing product? l Using the same SW stack? Re-using existing code? l Is your team familiar with a particular OS? Ø Using an OS you are already comfortable with can help l What are the HW constraints of your system? Ø Some operating systems require more memory/processing power than others l Have no SW team? Not sure about the above? Ø Contact us so we can help you decide! Ø We can also introduce you to one of our many partners! 1 OS SELECTION OPEN SOURCE VS. COMMERCIAL OS Embedded OS BSP Provider $ Cost Open-Source OS Boundary Devices • Embedded Linux / Android Embedded Linux $0, included • Large pool of developers available with Board Purchase • Strong community • Royalty-free And / or partners 3rd Party - Commercial OS Partners • QNX / Win10 IoT / Green Hills $>0, depends on • Professional support requirements • Unique set of development tools 2 OS SELECTION OPEN SOURCE SELECTION OS SELECTION PROS CONS Embedded Linux Most powerful / optimized Complexity for newcomers solution, maintained by NXP • Build systems Ø Yocto / Buildroot Simpler solution, makefile- Not as flexible as Yocto Ø Everything built from scratch based, maintained by BD Desktop-like approach, Harder to customize, non- Package-based distribution easy-to-use atomic updates, no cross- • Ubuntu / Debian compilation SDK Apt install / update, millions • Packages installed from server of prebuilt packages available Android Millions of apps available, same number of developers, Resource-hungry, complex • AOSP-based (no GMS) development environment, BSP modifications (HAL) • APK applications IDE + debugging tools 3 SOFTWARE PARTNERS Boundary Devices has an industry-leading group of software partners.
    [Show full text]
  • Yocto-Slides.Pdf
    Yocto Project and OpenEmbedded Training Yocto Project and OpenEmbedded Training © Copyright 2004-2021, Bootlin. Creative Commons BY-SA 3.0 license. Latest update: October 6, 2021. Document updates and sources: https://bootlin.com/doc/training/yocto Corrections, suggestions, contributions and translations are welcome! embedded Linux and kernel engineering Send them to [email protected] - Kernel, drivers and embedded Linux - Development, consulting, training and support - https://bootlin.com 1/296 Rights to copy © Copyright 2004-2021, Bootlin License: Creative Commons Attribution - Share Alike 3.0 https://creativecommons.org/licenses/by-sa/3.0/legalcode You are free: I to copy, distribute, display, and perform the work I to make derivative works I to make commercial use of the work Under the following conditions: I Attribution. You must give the original author credit. I Share Alike. If you alter, transform, or build upon this work, you may distribute the resulting work only under a license identical to this one. I For any reuse or distribution, you must make clear to others the license terms of this work. I Any of these conditions can be waived if you get permission from the copyright holder. Your fair use and other rights are in no way affected by the above. Document sources: https://github.com/bootlin/training-materials/ - Kernel, drivers and embedded Linux - Development, consulting, training and support - https://bootlin.com 2/296 Hyperlinks in the document There are many hyperlinks in the document I Regular hyperlinks: https://kernel.org/ I Kernel documentation links: dev-tools/kasan I Links to kernel source files and directories: drivers/input/ include/linux/fb.h I Links to the declarations, definitions and instances of kernel symbols (functions, types, data, structures): platform_get_irq() GFP_KERNEL struct file_operations - Kernel, drivers and embedded Linux - Development, consulting, training and support - https://bootlin.com 3/296 Company at a glance I Engineering company created in 2004, named ”Free Electrons” until Feb.
    [Show full text]
  • Why the Yocto Project for My Iot Project?
    Why the Yocto Project for my IoT Project? Drew Moseley Technical Solutions Architect Mender.io Session overview ● Motivation ● Challenges for Embedded, Linux and IoT developers ● Describe IoT workflow ● Overview of Yocto ● Benefits of Linux and Yocto for IoT about.me Drew Moseley Mender.io ○ 10 years in Embedded Linux/Yocto development. ○ Over-the-air updater for Embedded Linux ○ Longer than that in general Embedded Software. ○ Project Lead and Solutions Architect. ○ Open source (Apache License, v2) ○ Dual A/B rootfs layout (client) [email protected] https://twitter.com/drewmoseley ○ Remote deployment management (server) https://www.linkedin.com/in/drewmoseley/ https://twitter.com/mender_io ○ Under active development Motivation Embedded Projects increasingly use Linux: ● AspenCore/Linux.com1: Embedded Linux top 2 in current and planned use. Huge IoT market opportunity: ● Forbes2: $267B by 2020 Linux is a big player in IoT ● Nodes & Gateways3 - 17.18 Billion units by 2023 ● Inexpensive prototyping hardware - Raspberry Pi, Beaglebone, etc ● Readily available production hardware - Toradex, Variscite, Boundary Devices ● Wide selection of chipsets - NXP, TI, Microchip, Nvidia 1 https://www.linux.com/news/event/elce/2017/linux-and-open-source-move-embedded-says-survey 2 https://www.forbes.com/sites/louiscolumbus/2017/01/29/internet-of-things-market-to-reach-267b-by-2020 3 http://www.marketsandmarkets.com/PressReleases/iot-gateway.asp Challenges for Embedded Linux/IoT Developers Hardware variety Storage Media Software may be maintained in forks Cross development Initial device provisioning Getting Started Guide for Embedded/IoT Development 1. Buy Hardware1 1https://makezine.com/comparison/boards/ Getting Started Guide for Embedded/IoT Development 1. Buy Hardware1 2.
    [Show full text]
  • RTI TLS Support Release Notes
    RTI TLS Support Release Notes Version 6.1.0 © 2021 Real-Time Innovations, Inc. All rights reserved. Printed in U.S.A. First printing. April 2021. Trademarks RTI, Real-Time Innovations, Connext, NDDS, the RTI logo, 1RTI and the phrase, “Your Systems. Work- ing as one,” are registered trademarks, trademarks or service marks of Real-Time Innovations, Inc. All other trademarks belong to their respective owners. Copy and Use Restrictions No part of this publication may be reproduced, stored in a retrieval system, or transmitted in any form (including electronic, mechanical, photocopy, and facsimile) without the prior written permission of Real- Time Innovations, Inc. The software described in this document is furnished under and subject to the RTI software license agreement. The software may be used or copied only under the terms of the license agree- ment. This is an independent publication and is neither affiliated with, nor authorized, sponsored, or approved by, Microsoft Corporation. The security features of this product include software developed by the OpenSSL Project for use in the OpenSSL Toolkit (http://www.openssl.org/). This product includes cryptographic software written by Eric Young ([email protected]). This product includes software written by Tim Hudson ([email protected]). Technical Support Real-Time Innovations, Inc. 232 E. Java Drive Sunnyvale, CA 94089 Phone: (408) 990-7444 Email: [email protected] Website: https://support.rti.com/ Contents Chapter 1 Supported Platforms 1 Chapter 2 Compatibility 3 Chapter 3 What's New in 6.1.0 3.1 Added Platforms 4 3.2 Removed Platforms 4 3.3 Updated OpenSSL Version 5 3.4 Target OpenSSL Bundles Distributed as .rtipkg Files 5 3.5 Changes to OpenSSL Static Library Names 5 Chapter 4 What's Fixed in 6.1.0 4.1 Still reachable memory leaks 6 4.2 No way to configure TLS 1.3 ciphers 6 Chapter 5 Known Issues 5.1 Possible Valgrind still-reachable leaks when loading dynamic libraries 7 iii Chapter 1 Supported Platforms This release of RTI® TLS Support is supported on the platforms in Table 1.1 Supported Platforms.
    [Show full text]
  • Linux Kernel Parameters
    LINUX KERNEL PARAMETERS LINUX KERNEL PARAMETERS Dip your toe into the mysterious heart of your Linux machine, with Andrew Conway and the magic of Linux kernel parameters. he dark days when new computer hardware should test it using a venerable utility called often required compiling your own kernel memtest86+. Many distros include it as an option at Tare now firmly in Linux’s past (though those the boot prompt, or you can put a distro such as were fun days). But the fact that Linux – meaning GPartedLive on a USB stick and select the the kernel itself – is free software means that you can memtest86+ option. The test will tell you if you’ve got still delve deep into its innards and tweak it to your bad memory and exactly where it is bad. In our case, heart’s content. the bad patch was reported as 2056.0MB to In an ideal world, the user would never need to think 2176.0MB. The solution was to restart the laptop, and about the kernel, but there are cases where it’s useful. when the bootloader began, switch to its command In fact, it becomes a line and set the necessity when memmap kernel hardware is faulty, “In an ideal world the user would parameter with such as with bad never need to think about the memmap=256M$2048M memory, or if it is This instructs the shipped with buggy kernel, but sometimes we have to.” kernel not to use the firmware that tells lies 256MB of memory about capabilities such as CPU speed or temperature.
    [Show full text]
  • A Timeline for Embedded Linux
    A timeline for embedded Linux Chris Simmonds 2net Ltd. 30th April 2014 Chris Simmonds (2net Ltd.) A timeline for embedded Linux 30th April 2014 1 / 26 License These slides are available under a Creative Commons Attribution-ShareAlike 3.0 license. You can read the full text of the license here http://creativecommons.org/licenses/by-sa/3.0/legalcode You are free to • copy, distribute, display, and perform the work • make derivative works • make commercial use of the work Under the following conditions • Attribution: you must give the original author credit • Share Alike: if you alter, transform, or build upon this work, you may distribute the resulting work only under a license identical to this one (i.e. include this page exactly as it is) • For any reuse or distribution, you must make clear to others the license terms of this work The orginals are at http://2net.co.uk/slides/ Chris Simmonds (2net Ltd.) A timeline for embedded Linux 30th April 2014 2 / 26 About Chris Simmonds • Consultant and trainer • Working with embedded Linux since 1999 • Android since 2009 • Speaker at many conferences and workshops "Looking after the Inner Penguin" blog at http://2net.co.uk/ https://uk.linkedin.com/in/chrisdsimmonds/ https://google.com/+chrissimmonds Chris Simmonds (2net Ltd.) A timeline for embedded Linux 30th April 2014 3 / 26 The early days: 1995 to 1999 • By 1995 Linux was already attracting attention beyond desktop and server • It just needed a few more steps to make it a real contender... Chris Simmonds (2net Ltd.) A timeline for embedded Linux
    [Show full text]
  • Instituto Tecnológico De Costa Rica Escuela De Ingenier´Ia En
    Instituto Tecnol´ogicode Costa Rica Escuela de Ingenier´ıaen Electr´onica Improvement of small satellite's software design with build system and continuous integration tools para optar por el t´ıtulode Ingeniero en Electr´onicacon ´enfasisen sistemas empotrados con el grado acad´emicode Maestr´ıa Allan Granados [email protected] Cartago, Diciembre, 2015 2 Contents 1 Introduction 8 1.1 Previous work focus on small satellites . .9 1.2 Problem statement . 11 1.3 Proposed solution . 13 1.3.1 Proposed development . 13 2 Software development approaches for small satellites 15 2.1 Software methodologies used for satellites design . 15 2.2 Small satellite design and structure . 17 2.3 Central computation system in satellites. Homogeneous and Het- erogeneous systems . 18 2.4 Different approach on software development for small satellites . 20 2.4.1 Software development: Monolithic approach . 20 2.4.2 Software development: Development by component . 21 2.5 Open Source tools on the design and implementation of software satellite . 23 3 Integration of build system for small satellite missions 24 3.1 Build systems as an improvement on the design methodology . 24 3.1.1 Yocto build system . 29 4 Development platforms 32 4.1 Beagleboard XM . 32 4.2 Pandaboard . 35 4.3 Beaglebone . 38 5 Design and implementation of the construction system 41 5.1 Construction System . 41 5.1.1 The hardware independent layer: meta-tecSat . 42 5.1.2 The hardware dependent later: meta-tecSat-target . 43 5.1.3 Integration of the dependent and independent hardware layers in the construction system . 44 5.1.4 Adding a new recipe to a layer .
    [Show full text]
  • Designing Ostree Based Embedded Linux Systems with the Yocto Project
    Yocto Project Summit 2021 Designing OSTree based embedded Linux systems with the Yocto Project Sergio Prado Toradex $ WHOAMI ✗ Designing and developing embedded software for 25+ years. ✗ Software Team Lead at Toradex (https://www.toradex.com/). ✗ Consultant/trainer at Embedded Labworks (e-labworks.com/en). ✗ Open source software contributor, including Buildroot, Yocto Project and the Linux kernel. ✗ Sometimes write technical stuff at https://embeddedbits.org/. ✗ Social networks: Twitter: @sergioprado Linkedin: https://linkedin.com/in/sprado AGENDA 1. Introduction to OSTree 2. Booting and running an OSTree-based system 3. Building an OSTree-based system with meta-updater 4. Remote updates with OSTree-based systems WHAT IS OSTREE? ✗ OStree, also known as libostree, provides a "git-like" model for committing and downloading bootable filesystem trees (rootfs). ✗ It’s like Git, in a sense that it stores checksum'ed files (SHA256) in a content-addressed object-store. ✗ It’s different from Git, because files are checked out via hard links, and they are immutable (read-only) to prevent corruption. ✗ Designed and currently maintained by Colin Walters (GNOME, OpenShift, RedHat CoreOS developer) A FEW OSTREE USERS ✗ Linux distributions: ✗ GNOME Continuous, Gnome OS ✗ Fedora CoreOS, Fedora Silverblue, Fedora IoT ✗ Endless OS ✗ Linux microPlatform ✗ TorizonCore ✗ Package management systems: ✗ rpm-ostree ✗ flatpak OSTREE IN A NUTSHELL ✗ A Git-like content-addressed object store, where we can store individual files or full filesystem trees. ✗ Provides a mechanism to commit and checkout branches (or "refs"). ✗ Manages bootloader configuration via The Boot Loader Specification, a standard on how different operating systems can cooperatively manage a boot loader configuration (GRUB and U-Boot supported).
    [Show full text]