Press Release 1 / 4 Vector Congress: Industry experts discuss the future of automotive electronics Stuttgart, GERMANY, 2016-12-20 – The Vector Congress, which has taken place every two years since 2002, is the recognized platform for the latest practice-oriented technical information organized by and for developers of automotive electronics. The 8th event took place in Stuttgart, Germany, on November 29 and 30, and was attended by more than 350 participants each day. Through expert presentations by international guest speakers and Vector specialists, they found out about the latest trends and challenges in the fields of ADAS, AUTOSAR Adaptive, Automotive Ethernet, Car2x/V2X, E/E architecture, safety and security, etc. At the accompanying exhibition, Vector specialists demonstrated current products and concrete solutions. The intensive exchange of experience amongst industry experts was a key part of the success of the event. In their presentations, the speakers – who were renowned experts from Baselabs, BMW, Bosch, CSM, CSI, Daimler, Hella, Magna Powertrain, Opel, Porsche, Volkswagen, ZF/TRW and Vector – discussed relevant technical issues faced within the industry, as well as concrete solutions and examples. Professor Eric Sax from the Karlsruhe Institute of Technology (KIT) opened the event with a keynote speech entitled “Harry, bring the car round”. In his presentation, he outlined the current problems of increasingly complex E/E and control device development, and how these require rethinking in the development process. AUTOSAR Adaptive, Cyber Security and Big Data are issues that the industry needs to keep under control, in addition to autonomous driving. New applications, such as autonomous driving, vehicle-to-X applications, and increased vehicle networking, are the main motivation for a new AUTOSAR standard, as Simon Fürst from BMW and Dr. Marcel Wille from Volkswagen demonstrated. In lieu of the static approach of the AUTOSAR Classic Platform, increasingly powerful algorithms demand dynamic system configurability. “Volkswagen will introduce centralized architecture which focuses on the update and upgrade capability of customer applications. As a general software framework, AUTOSAR Adaptive is one of the key elements of this architecture,” said Dr. Marcel Wille. Security is a – if not the – key aspect in terms of networked cars. Against this backdrop, Lorenz Slansky from Daimler tried to answer the question, “Is car IT security standardized?” On the one hand, standardization needs more time, and does not necessarily result in a higher level of security. On the other hand, the implementation of standardized processes leads to sophisticated technologies, reduced effort and expenditure, better complexity management, and the continuous improvement of security processes. Press Release 2 / 4 Dr. Matthias Traub from BMW discussed changes in the development of E/E architecture. He went into detail about the challenges of advanced digitalization, and spoke about the integration of more effective IT/CE technologies, the consistent reuse of software, and the use of security components to protect network functions. Robert Faure used the example of Renault to describe how a modern E/E architecture design can be implemented against this backdrop. For this, the Vector E/E engineering tool PREEvision is used, and supports key application areas for the manufacturer. In this context, Faure Concurrent Engineering named communication protocols such as Ethernet and CAN FD, Standards such as ISO 26262 and AUTOSAR, and explained the criteria that led to the selection of these tools. For ADAS and on the road to autonomous driving, reliable recognition of the vehicle environment plays a crucial role. Holger Löbel of Baselabs demonstrated a way of creating a complete workflow for sensor data infusion in pilot and series development. In addition, in the future, users will only have to configure their data fusion systems, as opposed to programming them. The 9th Vector Congress in 2018 will be the next opportunity for exchanging experiences with industry experts. If you do not want to wait that long, “Vector Technology Days” will take place in Fall 2017 near Stuttgart – a two-day event on the subject of future-oriented hands-on technology, with an extensive exhibition, workshops and presentations. For more information, all presentation slides and further videos go to: www.vector.com/veco-16 Figure 1: “Volkswagen will introduce centralized architecture which focuses on the update and upgrade capability of customer applications,” said Dr. Marcel Wille from Volkswagen. Image rights: Vector Informatik GmbH Press Release 3 / 4 Figure 2: The intensive exchange of experience amongst industry experts strongly contributed to the success of the 8th Vector Congress. Image rights: Vector Informatik GmbH You can find this and other press releases on our website at: www.vector.com/press International Press Contacts: Vector Informatik, Germany Vector Austria Stuttgart Vienna Mrs. Heike Schmidt Mr. Uwe Gerlinger Phone: +49 711 80670-5356 Phone: +43 1 90160 10 Fax: +49 711 80670-585356 Fax: +43 1 90160 9910 E-mail: [email protected] E-mail: [email protected] Vector CANtech, North America Vector Scandinavia, Sweden Detroit Gothenburg Mrs. Angela Ferrero Mr. Jan Schüldt Phone: +1 248 504 6447 Phone: +46 31 764 76-05 Fax: +1 248 449 9704 Fax. +46 31 764 76-19 E-mail: [email protected] E-mail: [email protected] Vector Japan Vector Korea Tokyo Seoul Mr. Shinsuke Yokoyama Mr. Yongseong Kim Phone: +81 3 5769 7825 Phone: +82 70 8655 3320 Fax: +81 3 5898 6975 Fax: +82 2 807 0601 E-mail: [email protected] E-mail: [email protected] Vector France Vector India Paris Pune Mr. Jean-Philippe Dehaene Mr. Pushkar Sonar Phone: +33 1 4 231 4015 Phone: +91 20 6634 6625 Fax: +33 1 4 231 4009 Fax: +91 20 6634 6699 E-mail: [email protected] E-mail: [email protected] Press Release 4 / 4 Vector Great Britain Vector China Birmingham Shanghai Mr. Simon Davies Ms. Zita Ye Phone: +44 121 788-7921 Phone: +86 21 6432 5353 113 E-mail: [email protected] Fax: +86 21 6432 5308 E-mail: [email protected] Vector Italia Vector Brazil Milan Sao Paulo Mr. Christoph Dallmayr Mats Larsson Phone: +39 02 678171-14 Phone: +55 11 5180 4550 Fax: +39 02 678171-35 Fax: +55 11 5181 7013 E-mail: [email protected] E-mail: [email protected] About the Vector Group (Revised: December 2016): Vector Informatik is the leading manufacturer of software tools and embedded components for the development of electronic systems and their networking with many different systems from CAN to Automotive Ethernet. Vector has been a partner of automotive manufacturers and suppliers and related industries since 1988. Vector tools and services provide engineers with the decisive advantage to make a challenging and highly complex subject area as simple and manageable as possible. Vector employees work on electronic innovations for the automotive industry every day. Worldwide customers in the automotive, commercial vehicles, aerospace, transportation, and control technology industries rely on the solutions and products of the independent Vector Group for the development of technologies for future mobility. Vector worldwide currently employs more than 1,700 people with sales of EUR 332 million in 2015. With its headquarter in Germany (Stuttgart), Vector has subsidiaries in the USA, Japan, France, Great Britain, Italy, Austria, Sweden, South Korea, India, China, and Brazil. .