LENGTH MEASURING MACHINE GENERAL CATALOG E-PEAK15 - Origin of KANON Mark - The KANON mark is a symbol of technology of Nakamura Mfg. Co., Ltd., which was established at the time of foundation. Kanon is a Latin word that means“Standard.” We selected this word because we think that our products on which the KANON mark is printed must be“KANON” of all measuring equipment, namely the best model product. Note that the specifications may be changed without prior notice. Dealer 4-4, Ohi 4-chome, Shinagawa-ku, Tokyo 140-0014, Japan TEL: +81-3-3775-1527 FAX: +81-3-3775-1732 E-MAIL: [email protected] URL: http://www.bestool-kanon.co.jp/english/ 2016.2-3000 LENGTH MEASURING MACHINE GENERAL CATALOG INDEX Digital caliper holding E-PEAK digital caliper E-PEAK 2 Min and Max measured value E-PITA (flat-head digital caliper) ／ PITA (flat-head vernier caliper) 3 E-PEAK Flat-head caliper ULJ (judgment) 4 Adequate for narrow space where the display is hard to see 5 PLUS10 REGISTERED AS UTILITY MODEL (Japan) Large-size digital caliper, dial caliper EMA ／ DMK-J 6 E-RX ／ E-RZ 7 E-RM-J 8 Caliper for measuring E-RX-J ／ RM-DX 9 circular hole pitch RM（ⅠⅠ） ／ RM-S 10 E-RM60B ／ E-RM30DX 11 E-RM（ⅠⅠ） ／ E-RM-S ／ special-purpose gage block 12 E-DP-J ／ E-DP2J (extra thin) 13 Digital depth gauge Overall length E-TH (E-thin hole) ／ E-RD (cave) 14 E-LSDM ／ LSDM 15 E-PEAK15 ESDM ／ SDM 16 Depth gage BSDM ／ BSD-P 17 SD-P ／ TH (thin hole) 18 KSM-FF ／ SM 19 Popular vernier caliper M ／ M60P 20 Caliper with curre jaw E-RA (E-curre jaw) ／ RA (curre jaw) 21 Maximum values and minimum values are automatically stored. Caliper for narrow space E-ROBA ／ ROBA 22 Long jaw caliper E-LSM ／ LSM 23 Inside caliper E-ICM-J ／ E-ICM ／ ICM 24 For measuring inner diameter, the maximum value (Max) mode Digital blade caliper E-BL 25 is convenient! Digital wide caliper E-WK 25 Digital point vernier caliper E-PK 26 99.98 ● On former vernier calipers, ● The maximum value of inner Digital pipe caliper E-PM 26 users search the maximum 100.00 diameter is automatically value as a numerical value. stored in an E-PEAK vernier Digital neck caliper E-NK 26 99.98 caliper. Flange caliper FCM (for inspection) ／ FBM (for working) 27 Short leg caliper SBM 28 Inspection instrument SNAP GAGE 28 Vernier caliper SCM ／ SCML 29 Digital scale ES-B ／ TES 30 For measuring outer diameter at a dark location, the minimum Digital height gage EHK30J 31 value (Min) mode is convenient! Reading at hand Printer TPK-3 32 Lathe turning (Posture for reading caliper is hard.) Scriber Scriber ／ Rotating scriber 32 Height gage SHT-3 ／ SHT-1 33 Measurement at the back of processing machine One-axis measuring machine (straight line) 34 (difficult to see the display) X-600 ／ X-1000 Convenient in such cases! Vision measuring machine EXLON-y 35 100.18 Coordinate measuring machine ⅠⅠⅠ 36 Measurement of EXLON-Z 453 100.00 ● The minimum value of outer width of large groove 100.22 BESTOOL-KANON Kanon About vernier calipers 37・38 diameter is automatically stored in an E-PEAK vernier caliper. Japanese Industrial Standards JIS About vernier calipers 39・40 SM・M type ／ KSM type ／ SCM type 41・42 Parts list ■ E-PEAK：Specifications (Unit : mm) type ／ type ／ type 43・44 SDM SHT-3 SHT-1 Model Measuring length Resolution Instrumental error Overall length Power supply Weight A B C D E F G H E-PEAK15 150 241 170g 234 16 76 40 14 30 7 3.8 ±0.02 SR44 E-PEAK20 190g 284 16 76 40 14 30 7 3.8 200 0.01 291 1 piece E-PEAK30 300 ±0.03 396 280g 388 16 103 64 14 47 8 4.8 ←"ONLY ONE": Products with this red mark are BESTOOL-KANON completely original products. For special size or special specification products from products listed in this catalog, we accept request of estimate and order. Contact our company or your dealers, 1 2 LENGTH MEASURING MACHINE GENERAL CATALOG INDEX Digital caliper holding E-PEAK digital caliper E-PEAK 2 Min and Max measured value E-PITA (flat-head digital caliper) ／ PITA (flat-head vernier caliper) 3 E-PEAK Flat-head caliper ULJ (judgment) 4 Adequate for narrow space where the display is hard to see 5 PLUS10 REGISTERED AS UTILITY MODEL (Japan) Large-size digital caliper, dial caliper EMA ／ DMK-J 6 E-RX ／ E-RZ 7 E-RM-J 8 Caliper for measuring E-RX-J ／ RM-DX 9 circular hole pitch RM（ⅠⅠ） ／ RM-S 10 E-RM60B ／ E-RM30DX 11 E-RM（ⅠⅠ） ／ E-RM-S ／ special-purpose gage block 12 E-DP-J ／ E-DP2J (extra thin) 13 Digital depth gauge Overall length E-TH (E-thin hole) ／ E-RD (cave) 14 E-LSDM ／ LSDM 15 E-PEAK15 ESDM ／ SDM 16 Depth gage BSDM ／ BSD-P 17 SD-P ／ TH (thin hole) 18 KSM-FF ／ SM 19 Popular vernier caliper M ／ M60P 20 Caliper with curre jaw E-RA (E-curre jaw) ／ RA (curre jaw) 21 Maximum values and minimum values are automatically stored. Caliper for narrow space E-ROBA ／ ROBA 22 Long jaw caliper E-LSM ／ LSM 23 Inside caliper E-ICM-J ／ E-ICM ／ ICM 24 For measuring inner diameter, the maximum value (Max) mode Digital blade caliper E-BL 25 is convenient! Digital wide caliper E-WK 25 Digital point vernier caliper E-PK 26 99.98 ● On former vernier calipers, ● The maximum value of inner Digital pipe caliper E-PM 26 users search the maximum 100.00 diameter is automatically value as a numerical value. stored in an E-PEAK vernier Digital neck caliper E-NK 26 99.98 caliper. Flange caliper FCM (for inspection) ／ FBM (for working) 27 Short leg caliper SBM 28 Inspection instrument SNAP GAGE 28 Vernier caliper SCM ／ SCML 29 Digital scale ES-B ／ TES 30 For measuring outer diameter at a dark location, the minimum Digital height gage EHK30J 31 value (Min) mode is convenient! Reading at hand Printer TPK-3 32 Lathe turning (Posture for reading caliper is hard.) Scriber Scriber ／ Rotating scriber 32 Height gage SHT-3 ／ SHT-1 33 Measurement at the back of processing machine One-axis measuring machine (straight line) 34 (difficult to see the display) X-600 ／ X-1000 Convenient in such cases! Vision measuring machine EXLON-y 35 100.18 Coordinate measuring machine ⅠⅠⅠ 36 Measurement of EXLON-Z 453 100.00 ● The minimum value of outer width of large groove 100.22 BESTOOL-KANON Kanon About vernier calipers 37・38 diameter is automatically stored in an E-PEAK vernier caliper. Japanese Industrial Standards JIS About vernier calipers 39・40 SM・M type ／ KSM type ／ SCM type 41・42 Parts list ■ E-PEAK：Specifications (Unit : mm) type ／ type ／ type 43・44 SDM SHT-3 SHT-1 Model Measuring length Resolution Instrumental error Overall length Power supply Weight A B C D E F G H E-PEAK15 150 241 170g 234 16 76 40 14 30 7 3.8 ±0.02 SR44 E-PEAK20 190g 284 16 76 40 14 30 7 3.8 200 0.01 291 1 piece E-PEAK30 300 ±0.03 396 280g 388 16 103 64 14 47 8 4.8 ←"ONLY ONE": Products with this red mark are BESTOOL-KANON completely original products. For special size or special specification products from products listed in this catalog, we accept request of estimate and order. Contact our company or your dealers, 1 2 Pass/fail judgment function is added to Epoch-making flat-head caliper E-PITA／PITA ULJ Judgement flat-head caliper. 21st century version of standard caliper! Flat-head vernier caliper series JUDGEMENT With“Flat head”, measurement can be conducted easily from any corners. With "Judgment function", instantaneous sorting of accepted products and rejected products is available. E-PITA15 Overall length Overall length ● Complete renewal of design and various types ULJ15 of size provide a wider range of use! ■ E-PITA ： Specifications (Unit : mm) Model Measuring length Resolution Instrumental error Overall length Power supply Weight A B C D E F G H E-PITA10 100 191 160g 184 16 76 40 14 30 7 3.8 Measurement of Measurement of Measurement E-PITA15 150 ±0.02 241 170g 234 16 76 40 14 30 7 3.8 SR44 internal dimension external dimension of depth E-PITA20 200 0.01 291 190g 284 16 76 40 14 30 7 3.8 1 piece E-PITA30 300 ±0.03 396 280g 388 16 103 64 14 47 8 4.8 E-PITA40 400 ±0.05 496 400g 488 16 103 64 14 47 8 ＊E-PITA40 is not equipped with any depth bar. ■ E-PITA ： Metric / Inch model Specifications (Unit : mm) Model Measuring length Resolution Instrumental error Overall length Power supply Weight A B C D E F G H E-PITA150×6″ 150mm×6″ 0.01mm 241 170g 234 16 76 40 14 30 7 3.8 ±0.02 SR44 × E-PITA200×8″ 200mm×8″ 291 1 piece 190g 284 16 76 40 14 30 7 3.8 E-PITA300×12″300mm×12″ 0.0005″ ±0.03 396 280g 388 16 103 64 14 47 8 4.8 ● For sorting accepted parts and rejected parts from a large quantity of parts or the like, the working time can In addition to normal measurement, be largely reduced relative to former products.