Audi Video Interface Manual

Audi Video Interface Manual

High-Definition Link for Audi Manual car-solutions.com www.car-solutions.com [email protected] Contents • Cautions_____________________________________________________________ 3 • Dimension & Exterior_________________________________________________ 4 • Components & Optional parts_________________________________________ 5 • Full Installation Diagram______________________________________________ 6 • CAN wires information(exceptions____________________________________) 7 • HDMI Connection Diagram____________________________________________ 8 • Navigation Connection Diagram(Type A & B) ___________________________ 9 • Compatibility Chart for Navigation(GPS) box models ___________________ 10 • LVDS Connection Diagram___________________________________________ 11 • Body Connector specifications_______________________________________ 12 • Car Compatibility Chart______________________________________________ 13 • Activation by original buttons of Audi _________________________________ 14 • DIP Switch Settings_________________________________________________ 15 • Settings 1. Enter into the setting menu____________________________________ 16 2. HDMI mode settings___________________________________________ 17 3. NAVI mode settings____________________________________________ 17 4. Rear view camera settings_____________________________________ 18 5. AV1(Front view camera) settings________________________________ 18 6. Automatic activation function(AV1) _____________________________ 19 7. AV2 settings__________________________________________________ 19 8. System settings_______________________________________________ 20 9. System information____________________________________________ 20 10. Informationcar-solutions.com of Dip switch settings ______________________________ 21 www.car-solutions.com [email protected] Cautions • You should check the names and colors of each wires exactly, before you connect the wires. ex) CAN HIGH: White wires / CAN LOW: Blue wires • The ‘POWER / CAN Cable’ should always be connected last and be disconnected first. • The 'Mode Switch' is an optional part to change modes forcibly without CAN-BUS. Generally, the CAN-BUS wires are connected for changing modes by original buttons. • When the reverse gear is not detected by CAN-BUS, the 'REVERSE 12V IN wire’ should be spliced with 12V power of reverse light. HDMI device-related • HDMI mode accepts general-screen resolution of HDMI devices. If screen size of HDMI does not fit on the monitor, should adjust screen size & position in 'settings mode'. • Generally, '5V 1A Power output(5V USB POWER)' is a standard voltage for charging smartphone. If you need higher voltage than 5V, you should add a separate power supply. Navigation(GPS) box-related • When you connect the power wires(B+, ACC) to the navigation(GPS) box, the 'ACC (12V) OUT' wire supported by device should be spliced with an ACC wire of navigation box. • After installation is done, select an applicable navigation(GPS) box model in the 'Navigation model selection menu' of setting car-solutions.commode. • The navigation box should be powered off before unplugging the HDMI cable. 3 www.car-solutions.com [email protected] ⓐ ⓑ ⓒ ⓓ ⓔ Exterior ⓐ DIP SWITCH ⓑ AV IN / OUT ⓒ TOUCH IN ⓓ MODE ⓔ POWER / CAN ⓕ HDMI IN ⓖ 5V USB POWER ⓗ NAVI IN ⓘ UART I/F ⓙ LVDS OUT ⓕ ⓖ ⓗ ⓘ ⓙ car-solutions.com www.car-solutions.com [email protected] 4 Components Power / CAN Cable LVDS Cable LVDS PCB HDMI Cable AV IN / OUT Cable 5-pin Micro USB Cable Optional Parts(sold separately) Optional Parts(purchased separately) TTA 24-Pin to HDMI Gender Touch-IN Cable Mode Switch iNAVI CUBE LCD Cable HDMI Cable HDMI extender (For iNAVI CUBE) car-solutions.com(Male to Male) (For stick type HDMI device) 5 www.car-solutions.com [email protected] Touch screen panel Full Installation Diagram GND Input MMI DATA Pin Specification B+ Power Input 1 5 9 13 10 ※ Optional External Devices Mode GND Output 12V ACC Power Touch IN Cable Switch Output (Navigation Power) (Installation Type A) (optional) 4 8 12 16 RV-CAM Video Input External Rear View 12V Power Output & GND Output(RV-CAM Power) Camera Reverse Signal Detection(optional) MON CAN wires (Some vehicles should be connected the 'MON CAN wires'.) MMI 3G Plus & MMI 3G Head Unit Original Main-Harness AUDI MMI(Green) DIP S/W Setting Power / CAN Pin # 10 = MMI DATA(Yellow / White) Cable or (Light Green) NAVI Audio Input PAS CAN HIGH & LOW <A4, A5, A6, A7, A8, Q5, Q7> Audio(AUX) Output of Navigation Box 1 2 3 4 5 Audio Output Auxiliary(AUX) PAS CAN H(White) * 20-Pin Connector of Climate controller Input of the car Pin # 4 = CAN HIGH(Orange / Blue) or (Orange / Light Green) Pin # 5 = CAN LOW(Orange / Brown) PAS CAN L(Blue) * Some vehicles should be connected the CAN wires at the other place. (Please refer to next page.) HDMI USB HDMI HDMI FV-CAM Video Input MMI 3G & 3G+ Head Unit(OEM) (AV1) External Front View Camera HDMI HDMI LVDS IN / OUT Connection LVDS IN / OUT car-solutions.comHDMI AV-Input(AV2) PCB AV device (ex: DTV Box, Divx) 6 www.car-solutions.com HDMI Device Navigation Box [email protected] CAN wires information(exceptions) < 2010, 2011 Audi A4 > < 2012~ Audi Q3 > Climate Controller – 20-Pin Connector Climate Controller – 16-pin Connector 1 4 5 9 19 20 10 18 9 12 13 16 POWER / CAN Cable POWER / CAN Cable PAS CAN L PAS CAN L PAS CAN H Pin # 4 = PAS CAN HIGH(Orange / Light Green) PAS CAN H Pin # 12 = PAS CAN LOW(Orange / Brown) AUDI MMI Pin # 5 = PAS CAN LOW(Orange / Brown) AUDI MMI Pin # 13 = PAS CAN HIGH(Orange / Light Green) MON CAN L MON CAN L MON CAN H MON CAN H ACC(12V) OUT Pin # 8 = MON CAN LOW(Orange / Brown) ACC(12V) OUT Pin # 2 = MON CAN HIGH(Orange / Black) GROUND GROUND GROUND Pin # 18 = MON CAN HIGH(Orange / Blue) GROUND Pin # 3 = MON CAN LOW(Orange / Brown) BAT + BAT + Gateway+BEM Module(on the left of the glovebox) – 20-Pin Connector LWR Steuergerät Module(on the glovebox) – 26-Pin Connector 1 11 8 10 1 2 3 13 18 car-solutions.com20 • Normally, general models of Audi should be just connected the ‘PAS CAN High, Low wires’ at the climate controller. • But, some models have different CAN-BUS data. Please refer to above pictures and connect the CAN wires. 7 www.car-solutions.com [email protected] HDMI Connection Diagram HDMI Device HDMI Device HDMI IN 5V USB NAVI IN UART I/F LVDS OUT HDMI IN 5V USB NAVI IN UART I/F LVDS OUT POWER POWER HDMI USB HDMI USB HDMI HDMI (5V-1A Power output for HDMI Device) (5V-1A Power output for HDMI Device) (Male) (Female) (HDMI Extender) (HDMI Cable) ‘Stick Type’ HDMI Devices ‘Dongle & Adapter’ Type HDMI Devices car-solutions.com 8 www.car-solutions.com [email protected] Navigation Connection Diagram(Type A) Navigation Connection Diagram(Type B) Navigation(GPS) Box Navigation(GPS) Box HDMI IN 5V USB NAVI IN UART I/F LVDS OUT HDMI IN 5V USB NAVI IN UART I/F LVDS OUT POWER POWER TOUCH IN HDMI HDMI Touch screen panel HDMI Touch screen panel Gender (TTA 24-pin to HDMI) LCD Cable (Touch panel cable) LCD HDMI (TTA 24-pin to TTA 24-pin) Cable car-solutions.com iNAVI - CUBE iMERCURY – Class Settop 9 www.car-solutions.com [email protected] Compatibility Chart for Navigation(GPS) box models – Korea Market Installation Model Country Dip S/W Required Parts (Navigation) Type CUBE(Light) South Korea Type A - iNAVI Gender CUBE LCD Touch-IN (TTA 24-pin HDMI Cable OFF(↑): 1, 2, 3, 4 Cable(iNAVI) Cable to HDMI) (Male to Male) Class Settop South Korea Type B - iMERCURY ON(↓): 1, 2, 3 HDMI Cable OFF(↑): 4, 5 (HDMI to HDMI) • The device supports navigation(GPS)car-solutions.com box models equipped with 'Digital video output'. • It does not support the 'RGB video'. 10 www.car-solutions.com [email protected] LVDS Connection Diagram LVDS Connection HDMI IN 5V USB NAVI IN UART I/F LVDS OUT POWER MMI 3G Plus & 3G Head Unit HDMI • 'Genuine(OEM) LVDS connector' should be connected to 'LVDS IN / OUT PCB'. • ‘Provided LVDS connector' should be connected to the head unit instead to the genuine connector. Genuine Monitor(OEM) LCD Cable (Provided LVDS Cable) LVDS IN / OUT HDMI car-solutions.comPCB (OEM LVDS Cable) 11 www.car-solutions.com [email protected] Body Connector specifications POWER / CAN MODE TOUCH-IN AV IN / OUT DIP SWITCH 1 2 3 4 5 6 7 8 9 10 11 1 2 3 4 5 6 7 8 9 10 1 2 1 2 3 4 12 13 14 15 16 17 18 19 20 21 22 Length: 100 cm Length: 20 cm REAR CAMERA REAR NAVI AUD IN R AUD NAVI NAVI AUD IN L IN AUD NAVI AUDIO OUT R AUDIO AUDIO OUT L AUDIO AV2 IN R AV2 AV2 IN V AV2 IN L AV2 AV1 IN V AV1 ACC(12V) OUTACC(12V) MON CANH MON MON CANL MON REVERSE 12V IN 12V REVERSE PAS CAN H CANPAS PAS CAN L CANPAS AUDI MMI AUDI GROUND GROUND REAR 12V REAR GROUND BAT + BAT IR OUT IR Length: 150 cm Length: 150 cm 1 BATTERY POWER INPUT 1 RV-CAM VIDEO INPUT 12 GND(RV-CAM VIDEO) 2 GND INPUT 2 RV-CAM POWER OUT 13 GND OUTPUT(RV-CAM) 3 GND OUTPUT 3 REVERSE DETECTION 14 IR OUT 4 ACC(12V) POWER OUTPUT 4 NAVI AUX INPUT R 15 GND(NAVI AUX IN R) 5 MONITOR CAN HIGH 5 NAVI AUX INPUT L 16 GND(NAVI AUX IN L) 6 MONITOR CAN LOW 6 AUDIO OUTPUT R 17 GND(AUDIO OUT R) 7 AUDI MMI(Only for AUDI) 7 AUDIO OUTPUT L 18 GND(AUDIO OUT L) 8 - 8 AV1 VIDEO INPUT 19 GND(AV1 VIDEO IN) 9 PAS CAN HIGH PUSH SWITCH TOUCH-IN 9 AV2 VIDEO INPUT 20 GND(AV2 VIDEO IN) 10 PAS CAN LOW CABLE 10 AV2 AUDIO INPUT R 21 GND(AV2 AUDIO IN R) car-solutions.com11 AV2 AUDIO INPUT L 22 GND(AV2 AUDIO IN L) • The colors of each wires can be changed under manufacturer’s circumstance. 12 www.car-solutions.com [email protected] Car Compatibility Chart Production Car Models Specific Models Year A4 2010 - B8 A5 2009 - 8T A6 2010 - 2011 C6(MMI 3G) A6 2011 - C7 The device is used in combination with Audi MMI(Multi Media Interface) A7 2010 - 4G system.

View Full Text

Details

  • File Type
    pdf
  • Upload Time
    -
  • Content Languages
    English
  • Upload User
    Anonymous/Not logged-in
  • File Pages
    21 Page
  • File Size
    -

Download

Channel Download Status
Express Download Enable

Copyright

We respect the copyrights and intellectual property rights of all users. All uploaded documents are either original works of the uploader or authorized works of the rightful owners.

  • Not to be reproduced or distributed without explicit permission.
  • Not used for commercial purposes outside of approved use cases.
  • Not used to infringe on the rights of the original creators.
  • If you believe any content infringes your copyright, please contact us immediately.

Support

For help with questions, suggestions, or problems, please contact us