International Conference on Mechanical Engineering and Electrical Systems (ICMES 2015) MATEC Web of Conferences Volume 40 (2016) Singapore 16 - 18 December 2015 Editors: Guanghsu A. Chang S. Arumuga Perumal Maode Ma Guojian Chen ISBN: 978-1-5108-1942-9 Printed from e-media with permission by: Curran Associates, Inc. 57 Morehouse Lane Red Hook, NY 12571 Some format issues inherent in the e-media version may also appear in this print version. This work is licensed under a Creative Commons Attribution license: http://creativecommons.org/licenses/by/2.0/ You are free to: Share – copy and redistribute the material in any medium or format. Adapt – remix, transform, and build upon the material for any purpose, even commercial. The licensor cannot revoke these freedoms as long as you follow the license terms. Under the following terms: You must give appropriate credit, provide a link to the license, and indicate if changes were made. You may do so in any reasonable manner, but not in any way that suggests the licensor endorses you or your use. The copyright is retained by the corresponding authors. Printed by Curran Associates, Inc. (2016) For additional information, please contact EDP Sciences – Web of Conferences at the address below. EDP Sciences – Web of Conferences 17, Avenue du Hoggar Parc d'Activité de Courtabœuf BP 112 F-91944 Les Ulis Cedex A France Phone: +33 (0) 1 69 18 75 75 Fax: +33 (0) 1 69 28 84 91 [email protected] Additional copies of this publication are available from: Curran Associates, Inc. 57 Morehouse Lane Red Hook, NY 12571 USA Phone: 845-758-0400 Fax: 845-758-2633 Email: [email protected] Web: www.proceedings.com TABLE OF CONTENTS DESIGN AND FABRICATION OF LOW COST THICK FILM PH SENSOR USING SILVER CHLORINATED REFERENCE ELECTRODES WITH INTEGRATED TEMPERATURE SENSOR......................1 Wiranto Goib, Idayanti Novrita, Tayubi Yuyu Rachmat, Batara Dimas Sukma MACHINABILITY STUDIES ON TURNING AL 6061ALLOY WITH 10% REINFORCEMENT OF B4C ON MMC........................................................................................................................................................................6 Srivathsan A., Srinivasa Perumal R., Vignesh A. A STUDY ON THE EFFECTS OF GEOMETRICAL PARAMETERS OF OVERLAY COATED LAYER ON THE THERMAL STRESS-STRAIN DISTRIBUTIONS OF CO-BASED SUPER- ALLOY DEPOSITED LAYER ON HOT-WORKING TOOL STEEL.......................................................................... 11 Guk Dae-Seon, Lee Ho-Jin, Ahn Dong-Gyu A STUDY ON THE EXPLORATION OF ELECTROSTATIC POWDER COATING MATERIALS SUITABLE FOR 3D SCANNING...................................................................................................................................... 15 Maeng Hee-young, Lee Myoungsang EXPERIMENT STUDY OF ELASTO-PLASTIC INTERACTIVE BUCKLING OF H-SECTION STEEL BEAM-COLUMNS................................................................................................................................................ 20 Deng Changgen, Zhang Chenhui, Feng Fan, Zhou Jiang REVIEW OF WIDE BAND-GAP SEMICONDUCTORS TECHNOLOGY ................................................................. 25 Jin Haiwei, Qin Li, Zhang Lan, Zeng Xinlin, Yang Rui SPECTRAL CHARACTERISTICS OF ACOUSTIC EMISSION OF ROCK BASED ON SINGULAR POINT OF HHT ANALYSIS ............................................................................................................................................. 30 Zhou Xiaoshan, Lu Xin, Liu Xiangxin NONLINEAR BENDING OF THE BLOCK SPHERICAL RETICULATED SHELLS WITH DAMAGE UNDER THE TRANSVERSE LOAD............................................................................................................. 34 Li Lei, He Sheng-dong, Hao Ji-ping THE MOTION PLANNING OF OVERHEAD CRANE BASED ON SUPPRESSING PAYLOAD RESIDUAL SWING............................................................................................................................................................ 38 Liu Hua-sen, Cheng Wen-min THE DESIGN OF REACTOR INTERNALS HOLD-DOWN SPRING......................................................................... 43 Guohong Xue, Ming Zhang, Linjun Xie, Ching Yu CFD ANALYSIS OF THE HYDRAULIC TURBINE DRAFT TUBE TO IMPROVE SYSTEM EFFICIENCY ...................................................................................................................................................................... 49 Chakrabarty Spandan, Sarkar Bikash Kr., Maity Subhendu DEVELOPMENT OF EXOSKELETONS AND APPLICATIONS ON REHABILITATION .................................... 55 Guan Xinyu, Ji Linhong, Wang Rencheng EXAMINING THE RELATIONSHIP BETWEEN FORCES DURING STEREOLITHOGRAPHY 3D PRINTING AND GEOMETRIC PARAMETERS OF THE MODEL ..................................................................... 60 Kovalenko Iaroslav, Garan Maryna, Shynkarenko Andrii, Zelený Petr, Šafka Jirí EFFECT OF SIDE WIND ON THE DIRECTIONAL STABILITY AND AERODYNAMICS OF A HYBRID BUOYANT AIRCRAFT .................................................................................................................................... 64 Haque Anwar U, Asrar Waqar, Omar Ashraf A, Sulaeman Erwin, Ali Mohamed J.S SAND PARTICLES IMPACT ON THE TRIBOLOGICAL BEHAVIOR OF SLIDING CONTACT........................ 69 Aldajah Saud, Alrawadeh Mohammed APPLICATION OF VALUE ENGINEERING TO REWORK REDUCTION IN SHIP BUILDING PROJECT ............................................................................................................................................................................ 74 Desai Tushar N. Dr., Prajapati S. R. Mr., Patel Hitesh R. Mr. THE SIMULATION AND ANALYSIS OF A U-SHAPED SLIDE VALVE BASED ON FLUENT ............................ 79 Pengcheng He MATHEMATICAL MODEL FOR THIN-WALLED CORRUGATED TUBE UNDER AXIAL COMPRESSION ................................................................................................................................................................. 83 Eyvazian Arameh SUPER-KNOCK SUPPRESSION USING SPLIT INJECTION IN A TURBO-CHARGED GDI ENGINE ............................................................................................................................................................................... 86 Lv Meng, Li Yun, Hu Xiaoming, Liu Yongchen, Chang Lv STATIC/DYNAMIC ANALYSIS AND OPTIMIZATION OF Z-AXIS STAND OF PCB CNC DRILLING MACHINE* ................................................................................................................................................... 89 Zhou Yanjun, Cai Changtao, Zhou Songlin RESEARCH ON SCHEME OF PUMPING ENERGY-SAVING BASED ON COMPUTER CONTROL TECHNOLOGY ............................................................................................................................................. 94 Chuan-Lin Li, Shi-lei Ma, Hua Liu, Hai-yun Wu, Ping Gao, Fan Yang THE DESIGN AND ANALYSIS OF THE MECHANICAL PROPERTY TEST PLATFORM FRAME FOR MARINE STRUCTURES .......................................................................................................................... 98 Wen-xian Tang, Cun-jun Li, Shi-jie Su, Bo Wang, Hai-rong Wang OPTIMAL DESIGN OF CUTTING-DISC OF NO-TILLAGE PLANTER BASED ON KINEMATICS ANALYSIS AND FEA............................................................................................................................ 102 Zhao Xu, Chen Dong A STUDY ON THE INFLUENCE OF FUEL PIPE ON FUEL INJECTION CHARACTERISTICS OF EACH NOZZLE HOLE IN DIESEL INJECTOR................................................................................................... 106 Luo Fuqiang, Wang Chuqiao, Xue Fuying, Ye Bingjian, Wu Xiwen PARAMETER IDENTIFICATION ON LUMPED PARAMETERS OF THE HYDRAULIC ENGINE MOUNT MODEL.............................................................................................................................................................. 113 Li Qian, Liu Weibo, Sun Ying, Zhi Pei, He Gang RESEARCH ON THE COMBINATION OF UNDERWATER ACOUSTIC COUNTERMEASURE EQUIPMENTS AGAINST TORPEDO........................................................................................................................... 118 Meng Jie, Wang Yong Jie, Cai Lei, Wei Ran A RESULT ON THE ACOUSTIC CHARACTERISTICS OF THE MIXTURE OF COUNTER- PHASE COUNTERACT AND SPLIT-GAS RUSHING MUFFLER ........................................................................... 121 Shao Ying-li ESTABLISHMENT AND NUMERICAL ANALYSIS OF LUBRICATION MODEL OF DOUBLE INVOLUTE GEAR ........................................................................................................................................................... 125 Fan Zhimin, Xu Jun THE APPLICATION OF SIMULATION TECHNOLOGY IN THE PARAMETER OPTIMIZATION OF CASTING PROCESS.................................................................................................................. 129 Zhuang Wenwei, Chen Zhixin, Yan Sufen, Zhou Haiying CLASSICAL MOLECULAR DYNAMICS SIMULATION ON THE DYNAMICAL PROPERTIES OF H2 ON SILICENE LAYER ........................................................................................................................................ 133 Casuyac Miqueas, Bantaculo Rolando CHARACTERIZATION AND DEVELOPMENT OF A KL DRIVING CYCLE FOR PHERB POWERTRAIN ................................................................................................................................................................. 138 Salisa A. R., Atiq W. H., Norbakyah J. S. CRASHWORTHINESS SIMULATION OF FRONT BUMPER MODEL OF