Safouh Soufi, P. Eng. EXPERIENCE Client: Cenovus Energy Project: Foster Creek Cogeneration Plant, 80 MW CHP Review plant electrical and protection systems. Investigate plant Services: islanding issues and recommend potential solutions. Client: Cabot Canada Ltd. Project: Cabot Tail-Gas CHP Project, 20 MW Tail-Gas fired CHP Project engineering development including interconnection, Services: preliminary design cycle, project statement of work documents and cost estimates. Client: Ontario Power Authority Project: Feed-In-Tariff Program Independent Engineer providing advice on metering plans and COD Services: related matters for wind, solar, biomass, biogass and landfill gas projects. Client: Ontario Power Authority Project: Potential DG and CHP in Ontario Independent Engineer providing advice on areas related to the technical assessment of NUG facilities’ role post PPA term expiry Services: and surveying the technical potential of CHP/Distributed generation in Ontario. Client: PPC Project: Caracol Knits Cogeneration Plant, Cortés, Honduras, Central A. Independent Engineer review of damaged waste heat recovery Services: boiler at the cogeneration plant and established the quantity of fuel oil required to displace generated steam from the facility. Client: Greenfield Ethanol Project: Chatham Cogeneration Plant Owner’s Engineer providing advice on development options and Services: economic viability of a 100 – 150 MW Cogeneration facility. Client: TEMBEC Project: Tembec CHP Project Owner’s Engineer providing advice on possible development of a Services: combined gas-fired and biomass-fired project. Client: Ontario Power Authority Project: OPA CHP Valuation Independent Engineer conducting a study on appropriate pricing for Services: CHP projects in Ontario. Qualified and where applicable quantified the cost-benefits of CHP projects in Ontario. Client: St. Marys Paper Corp. 2 Safouh Soufi, P. Eng. Project: St. Marys Renewable Energy Centre Owner’s Engineer developing a 35 MW Biomass CHP project at the site of St. Marys Paper Corp. in Sault Ste. Marie, Ontario, including Services: basic design parameters, main equipment, major systems, fuel supply sources and other relevant information. Several Projects: Thorold Cogeneration Project, 236 MW, combined cycle cogeneration plant; Algoma Energy Cogeneration Facility, 63 MW, waste-gas-fired conventional thermal cycle plant; East Windsor Cogeneration Centre, 84 MW, combined cycle cogeneration plant; Durham College District Energy, 2.3 MW, reciprocating engine cogeneration plant; Project: Great Northern Tri-Gen Facility, 11 MW, reciprocating engine tri- generation plant; London Cogeneration Facility, 12 MW, combined and conventional cycles cogeneration plant; Warden Energy Centre, 5 MW, reciprocating engine cogeneration plant; North York Energy Centre, 393 MW, Peaking facility; Halton Hills Generating Station, 600 MW, combined cycle plant; TransAlta Sarnia, 506 MW, combined cycle cogeneration plant. Independent Engineer’s project review and due diligence. Review and approval of metering plans and performance test protocols and Services: performance check tests. Annual review of CHP Useful Heat Output. Client: St. Marys Paper Corp. Project: St. Marys Paper Mill, 30 MW Biomass Fired CHP Owner Engineer’s providing assistance for completing applications Services: to participate in the IESO-Administered market. Client: SMP Algoma Cogeneration Project Project: 105 MW Waste Heat Cogeneration Plant Independent Engineer’s review and project due diligence. Reviewed all projects technical parameters and assessed the benefits of Services: incorporating a biomass boiler. Carried out capital costs and project economic analysis. Client: PPC – Comision Federal de Electricidad, Baja California, Mexico Project: CFE Cerro Prieto III Geothermal Power Plant, 220 MW Independent Engineer responsible for inspection, investigation and Services: assessment of costs and damages resulting from an earthquake at the Mexicali plant. Client: Brookfield Power, Sault Ste. Marie, Ontario Project: Brookfield-IESO’s ASP Agreement Services: Owner’s Engineer providing technical & strategic advice for Ancillary 3 Safouh Soufi, P. Eng. Service Provider (ASP) Agreement between IESO and Brookfield covering several generating facilities within the GLP transmission system. Client: Toronto Economic Development Corporation Portlands Energy Centre, Toronto, Ontario Project: Combined Cycle Plant, 550 MW Independent Engineer providing an expert opinion as to whether or not the plant is “cogeneration ready”. The plant is not anticipated to Services: have a thermal heat host when it enters commercial operations. The plant owner’s claim that the facility is designed to operate in a cogeneration mode. Client: Ontario Power Authority Project: Clean Energy Standard Offer Program (CESOP) Provided capital and O&M cost estimates for several distributed generation technologies and combined heat & power applications up Services: to 10 MW in size. Also provided capital and O&M costs for a simple cycle LM6000 gas turbine. Client: Mperial Power Ltd, Thailand SIPCO Power Project, Thailand Project: Combined Cycle Plant, 120 MW Owner’s Engineer responsible for front-end project development Services: engineering, connection to national grid, connection to nearby steel mill and review of EPC proposal. Client: PPC – Comision Federal de Electricidad (CFE), Mexico Project: CFE Salamanca Power Plant, Mexico Independent Engineer responsible for inspection, investigation and Services: assessment of damage costs resulting from Boiler# 1 explosion during routine maintenance outage. Client: Ontario Power Authority Portlands Energy Centre, Toronto, Ontario Project: Combined Cycle Plant, 550 MW Independent Engineer providing a review of project EPC and O&M costs. Evaluation of cost adjustments, impact on Net Revenue Services: Requirement and comparison with similar project. Review of project performance parameters (heat rate & capacity) and the proposed temporary generation option. Client: Maine Pointe LLC Project: Solutia Cogeneration Facility, Indian Orchard, MA, USA Independent Engineer providing a due diligence of owner’s proposal to improve/upgrade power generation facility to enhance steam Services: production, efficient distribution of thermal heat and augmentation with a new larger cogeneration plant. Client: Ontario Power Authority Project: Combined Heat & Power RFP 4 Safouh Soufi, P. Eng. Provided technical advice and assistance for the design framework Services: and process development of the OPA’s CHP RFP. Provided capital and O&M cost estimates for several CHP applications. Client: Confidential Project: Cogeneration Plant, 110 MW Performed comparative assessment of capital costs and heat rates Services: for a select list of projects whose proponents may submit proposals in response to the Ontario 2,500 MW RFP process for clean power. Client: St. Marys Paper, Sault Ste. Marie Project: Biomass Cogeneration Plant, 30 MW Completed feasibility study, preliminary engineering, capital costs, grid interconnection study, project proforma and environmental Services: review analysis for 30 MW wood-waste fired conventional thermal plant. Client: AES Ras Laffan Power Company Ras Laffan Power Project Project: 800 MW Combined Cycle Plant Plant performance testing. Review of EPC plant performance test Services: procedure and developed thermodynamic model to assess plant output and heat rate. Client: EnCana Power, Calgary, Alberta Cavalier Power Station, Strathmore, Alberta Project: 110 MW Combined Cycle Power plant Plant performance testing. Developed test procedure together with Services: a thermodynamic model to assess overall plant and main equipment performance. Client: EnCana Power, Calgary, Alberta Balzac Power Station, Calgary, Alberta Project: 110 MW Combined Cycle Power plant Plant performance testing. Developed test procedure together with Services: a thermodynamic model to assess overall plant and main equipment performance. Client: PanCanadian Power Services, Calgary, Alberta Project: Cavalier Power Station, 110 MW Investigation of main steam pipe failure. Mechanical review of pipe Services: support design and stress analysis. Client: Nusantara Steel Power, Malaysia Project: Nusantara Power Plant, 350 MW Owner’s engineer. Responsible for preliminary design & feasibility assessment of a 350 MW captive power station for a proposed 1.2 MTPA compact steel mill. Work included the development of Services: thermodynamic cycles for a number of options to facilitate their technical analysis. Compiled capital cost estimates for all options to enable their economic analysis and for the development of project 5 Safouh Soufi, P. Eng. proforma. Client: Piper Rudnick, New York, USA Termovalle S.C.A.E.S.P, Cali, Colombia Project: Combined Cycle Power Plant, 200 MW Independent engineer providing expert opinion at an arbitration hearing held to resolve disputes arising from project EPC Contract. Reviewed the engineering design relevant to the systems from which Services: the disputes have arisen. Reviewed the claims, evidence, and the pre-filed expert reports. Submitted a pre-filed expert report and provided testimony. Client: Babcock & Wilcox Canada Java Power Station, Indonesia Project: 415 MW Coal-Fired Power plant Balance of plant equipment engineering and capital cost for cooling Services: water, make-up water treatment, compressed air and waste water treatment systems. Client: National Power Development Inc. Project: Termovalle Power Plant, Cali, Colombia,