HSPA+ AT Commands Reference Guide COPYRIGHT AND TECHNICAL SUPPORT HSPA+ AT Commands Reference Guide MTSMC-H5-xx not .R1 Part Number S000528D, Revision E Copyright This publication may not be reproduced, in whole or in part, without prior expressed written permission from Multi-Tech Systems, Inc. All rights reserved. Copyright © 2013, by Multi-Tech Systems, Inc. Multi-Tech Systems, Inc. makes no representations or warranty with respect to the contents hereof and specifically disclaim any implied warranties of merchantability or fitness for any particular purpose. Furthermore, Multi-Tech Systems, Inc. reserves the right to revise this publication and to make changes from time to time in the content hereof without obligation of Multi-Tech Systems, Inc. to notify any person or organization of such revisions or changes. Revisions Revision Level Date Description A 10/19/12 Initial release. B 01/31/13 Added MTCBA-H5 model to product list. C 05/06/2013 Added MTR-H6 model to product list. D 08/20/2014 Removed models that ship with newer firmware. Trademarks Multi-Tech and the Multi-Tech logo are registered trademarks of Multi-Tech Systems, Inc. Contacting Multi-Tech Knowledge Base The Knowledge Base provides immediate access to support information and resolutions for all Multi-Tech products. Visit http://www.multitech.com/kb.go. Support Portal To create an account and submit a support case directly to our technical support team, visit: https://support.multitech.com Technical Support Business Hours: M-F, 9am to 5pm CT Country By Email By Phone Europe, Middle East, Africa: [email protected] +(44) 118 959 7774 U.S., Canada, all others: [email protected] (800) 972-2439 or (763) 717-5863 World Headquarters Multi-Tech Systems, Inc. 2205 Woodale Drive Mounds View, Minnesota 55112 Phone: 763-785-3500 or 800-328-9717 Fax: 763-785-9874 Warranty To read the warranty statement for your product, please visit: http://www.multitech.com/warranty.go. HSPA+ AT Commands Reference Guide 2 CONTENTS Contents Introduction ............................................................................................................................................................ 16 Formatting Conventions Overview ................................................................................................................................... 16 AT Command Syntax ......................................................................................................................................................... 16 String Type Parameters ................................................................................................................................................................... 17 Command Lines ............................................................................................................................................................................... 17 Information Responses And Result Codes ...................................................................................................................................... 18 Command Response Time-Out ....................................................................................................................................................... 19 Command Issuing Timing ................................................................................................................................................................ 19 Storing Values Set by Commands Overview ..................................................................................................................... 20 Factory Profile And User Profiles .................................................................................................................................................... 20 Format for Entering AT Commands ........................................................................................................................... 23 Command Line Prefixes ..................................................................................................................................................... 23 Starting A Command Line AT ......................................................................................................................................................... 23 Last Command Automatic Repetition A/ ...................................................................................................................................... 23 Repeat Last Command AT#/ .......................................................................................................................................................... 23 V.250 AT Commands ................................................................................................................................................ 24 Generic Modem Control ................................................................................................................................................... 24 Set to Factory-Defined Configuration &F ...................................................................................................................................... 24 Soft Reset Z ................................................................................................................................................................................... 24 Select Active Service Class +FCLASS .............................................................................................................................................. 25 Default Reset Basic Profile Designation &Y ................................................................................................................................... 25 Default Reset Full Profile Designation &P ..................................................................................................................................... 25 Store Current Configuration &W ................................................................................................................................................... 26 Store Telephone Number &Z ........................................................................................................................................................ 26 Display Stored Numbers &N.......................................................................................................................................................... 27 Manufacturer Identification +GMI ................................................................................................................................................ 27 Model Identification +GMM .......................................................................................................................................................... 27 Revision Identification +GMR ........................................................................................................................................................ 27 Capabilities List +GCAP .................................................................................................................................................................. 28 Serial Number +GSN ...................................................................................................................................................................... 28 Display Configuration and Profile &V ............................................................................................................................................ 28 Display Configuration and Profile &V0 .......................................................................................................................................... 28 S Registers Display &V1 ................................................................................................................................................................. 29 Extended S Registers Display &V3 ................................................................................................................................................. 29 Display Last Connection Statistics &V2 ......................................................................................................................................... 30 Single Line Connect Message \V ................................................................................................................................................... 30 3 HSPA+ AT Commands Reference Guide CONTENTS Country of Installation +GCI .......................................................................................................................................................... 30 DTE Modem Interface Control .......................................................................................................................................... 31 Command Echo E .......................................................................................................................................................................... 31 Quiet Result Codes Q .................................................................................................................................................................... 31 Response Format V ....................................................................................................................................................................... 32 Extended Result Codes X ..............................................................................................................................................................