IGEP TM v2 HARDWARE REFERENCE MANUAL Document: MAN-PR-IGEP0020-RCx Revision: 2.0 Date: February 6, 2013 IGEPTM v2 Hardware Reference Manual Table of contents Table of contents .................................................................................................................2 1 COPYRIGHT NOTICE ...................................................................................................4 2 WARRANTY ...............................................................................................................4 3 ORDERING INFORMATION .........................................................................................5 4 OVERVIEW ................................................................................................................6 4.1 ABOUT THIS MANUAL ............................................................................................6 4.2 IGEP™ v2 DESCRIPTION ...........................................................................................6 4.3 IGEPTM v2 FEATURES ..............................................................................................8 4.4 IGEP™ v2 BLOCK DIAGRAM ...................................................................................11 4.5 GENERAL VIEW ....................................................................................................12 5 ON-BOARD DEVICES & INTERFACES ..........................................................................14 5.1 SUMMARY ..........................................................................................................14 5.2 IGEP™ v2 CONNECTORS MAP ................................................................................15 5.3 OMAP PROCESSOR ..............................................................................................16 5.4 MEMORY ............................................................................................................16 5.5 POWER MANAGEMENT .......................................................................................16 5.6 WIFI/BLUETOOTH INTERFACE ...............................................................................17 5.6.1 BLOCK DIAGRAM ..........................................................................................17 5.6.2 INTERFACES .................................................................................................17 5.6.3 POWER-ON RESET SEQUENCE FOR WLAN ......................................................18 5.6.4 WLAN RESET/PDN PINS.................................................................................19 5.6.5 BLUETOOTH RESET PINS ...............................................................................19 5.6.6 PCM INTERFACE ...........................................................................................20 5.6.7 IGEP™ v2 ANTENNAS (INTERNAL/EXTERNAL - UD11, JD21, JD22) .....................20 5.7 MAIN 5Vdc POWER: J200 ....................................................................................24 5.8 JTAG DEBUG: J400 ..............................................................................................24 5.9 RS485: J940 ........................................................................................................26 5.10 SERIAL PORT DEBUG (+ EXTRA RS232) J960 ...........................................................28 5.10.1 DEBUG CABLE MODIFICATIONS (ONLY REV C) ................................................29 5.10.2 NEW FEATURES ON REV C .............................................................................30 5.10.3 HOW TO USE UART 1 ....................................................................................31 5.11 KEYBOARD MATRIX 4x4: J970 ...............................................................................32 5.12 TFT INTERFACE CONNECTORS: JA41 & JA42...........................................................34 ISEE 2007 S.L. All rights reserved, IGEP™ is a registered trademar k from ISEE 2007 S.L. The following is provided for informational purposes onl y. DOCUMENT FROM ISEE 2007 S.L. Ref: MAN-PR-IGEP0020-RCx 2 IGEPTM v2 Hardware Reference Manual 5.12.1 CONNECTOR JA41 ........................................................................................34 5.12.2 CONNECTOR JA42 ........................................................................................37 5.12.3 CONNECTORs JA41-JA42 COUNTERPARTs ......................................................38 5.13 ANALOG TO DIGITAL CONVERTER: JC20 & JC21 .....................................................39 5.14 CAMERA INTERFACE: JC30....................................................................................41 5.15 S-VIDEO SIGNALS: TP400 & TP401 ........................................................................43 5.16 RTC BACKUP BATTERY..........................................................................................44 5.17 USB 2.0 OTG: J830 ...............................................................................................47 5.18 USB 2.0 HOST: J800..............................................................................................48 5.19 ETHERNET: JB01 ..................................................................................................49 5.20 AUDIO: J650 & J640 .............................................................................................50 5.21 DVI-D INTERFACE: JA01 ........................................................................................53 5.22 MICRO-SD: J900...................................................................................................54 5.23 LED INDICATORS: D240 & D440 ............................................................................54 6 EXPANSION CONNECTOR J990: GPIO ........................................................................55 6.1 PINOUT TABLE OF EXPANSION CONNECTOR..........................................................58 7 EXPANDING IGEP™ v2 CAPABILITIES ..........................................................................59 7.1 IGEP™ v2 EXPANSION BOARD ................................................................................59 7.2 IGEP™ RADAR LAMBDA.........................................................................................60 8 MECHANICAL SPECIFICATIONS .................................................................................61 9 ELECTRICAL CHARACTERISTICS .................................................................................62 10 LIST OF TABLES........................................................................................................64 11 LIST OF FIGURES ......................................................................................................64 12 KNOWN ISSUES .......................................................................................................66 13 TROUBLESHOOTING ................................................................................................66 14 CHANGE HISTORY ....................................................................................................66 ISEE 2007 S.L. All rights reserved, IGEP™ is a registered trademar k from ISEE 2007 S.L. The following is provided for informational purposes onl y. DOCUMENT FROM ISEE 2007 S.L. Ref: MAN-PR-IGEP0020-RCx 3 IGEPTM v2 Hardware Reference Manual 1 COPYRIGHT NOTICE This document is copyrighted, 2011, by ISEE 2007 SL. All rights are reserved. ISEE reserves the right to make improvements to the products described in this manual at any time without notice. No part of this manual may be reproduced, copied, translated or transmitted in any form or by any means without the prior written permission of the original manufacturer. Information provided in this manual is intended to be accurate and reliable. However, the original manufacturer assumes no responsibility for its use, nor for any infringements upon the rights of third parties which may result from its use. 2 WARRANTY THE FOREGOING WARRANTY IS THE EXCLUSIVE WARRANTY MADE BY SELLER TO BUYER AND IS IN LIEU OF ALL OTHER WARRANTIES, EXPRESSED, IMPLIED, OR STATUTORY, INCLUDING ANY WARRANTY OF MERCHANTABILITY OR FITNESS FOR ANY PARTICULAR PURPOSE. The user assumes all responsibility and liability for proper and safe handling of the goods. Further, the user indemnifies ISEE 2007 SL from all claims arising from the handling or use of the goods. Due to the open construction of the product, it is the user’s responsibility to take any and all appropriate precautions with regard to electrostatic discharge. EXCEPT TO THE EXTENT OF THE INDEMNITY SET FORTH ABOVE, NEITHER PARTY SHALL BE LIABLE TO THE OTHER FOR ANY INDIRECT, SPECIAL, INCIDENTAL, OR CONSEQUENTIAL DAMAGES. ISEE 2007 SL currently deals with a variety of customers for products, and therefore our arrangement with the user is not exclusive. ISEE assumes no liability for applications assistance, customer product design, software performance, or infringement of patents or services described herein. Please read specifically, the Warnings and Restrictions notice in this manual prior to handling the product. This notice contains important safety information about temperatures and voltages. For additional information on IGEP™ environmental and/or safety programs, please contact with ISEE ([email protected]). No license is granted under any patent right or other intellectual property right of ISEE covering or relating to any machine, process, or combination in which such ISEE products or services might be or are used. NOTE: It coulD be founD a DetaileD