CYANO USER’S MANUALS Table of Contents CAPTER 1 | INTRODUCTION 1 CAPTER 2 | CAUTIONS & WARNINGS 2 CAPTER 3 | GETTING STARTED 3 App Installation and Bluetooth connection App description and use Viewing current settings Logs and Settings CAPTER 4 | DIVING 9 Preparing to dive Alarms Dive mode CAPTER 5 | SERVICING 13 CAPTER 6 | TECHNICAL SPECIFICATIONS 15 Algorithm Other specificiations CAPTER 7 | COPYRIGHTS, BRAND, TRADEMARK, KC CERTIFIED 17 CAPTER 8 | DEFENITIONS 18 Appendix | ACCESSORIESS 19 Introduction CYANO Derived from the Greek word Kuan(e)os, meaning "DEEP BLUE", a thick and dark blue color used to describe the sea. The Cyano-RF is a wrist watch type diving computer with a compact and smooth design to satisfy your stylish everyday lifestyle integrated with an intuitive UI to provide important information clearly during your dive. Compared to the usual LCD panel, the CYANO-RF is a recreational diving computer equipped with a 1.54" ISP LCD Panel to provide a wider and clearer view of the information even at depth, also containing Nitrox features and a digital compass. You could share you diving logs through SNS with CYANO's application, as well as personalize your settings. You can comfortably charge wirelessly to avoid accidents caused by changing the battery. You can try on different styles of straps with CYANO's quick release strap with ease. Warnings & Cautions The following manual contains important information on how to use the CYANO-RF It is required for the user to read and understand this manual to be aware of the use and features of the CYANO-RF ● Wrong input of information may result malfunctions and so it is required to read the manual thoroughly ● Before using the CYANO-RF, it is recommended th understand and know the limits of the this computer Misuse of the product may lead to defection of product, serious injuries or death ● The CYANO-RF is to be used only by certified divers. The CYANO-RF is not be used as a sole instrument to refer during diving The CYANO-RF model is made for Recreational Diving ONLY ● Dives such as Technical or Commercial Dives extend outside the range of recreational diving being more exposed to DCI Therefore it is prohibited to use the CYANO-RF when executing dives that extend outside the range of recreational diving ● DECO stop procedures will be strictly exercised immediately, ignoring may result to serious injuries or death. Disobeying DECO stop procedures will result to prohibiting the use of this computer for 48 hours ● It is recommended to practice safety stops within 3~6 meters when ascending ● Please strictly obey required ascent rate to minimize danger of Decompression Illness (DCI). Ascending too fast may result to DCI and may result to serious injuries or death An alarm and warning screen will appear 2 minutes before your NDL or 2 minutes before the computer enters DECO mode. It is strictly ● required to exercise DECO stop procedures in the required depth after entering the DECO MODE due to ignoring the alarm and not ascending earlier It is impossible to eliminate entirely the risk of DCI with any instruments when diving, even when all safety procedures are met with correct ● dive plans and correct use of diving tables. It is recommended for the user to stay fit and healthy for the computer is unable to calculate personal fitness of each user, it is also recommended that the user dives after consulting with a physician 1 Warnings and Cautions ● CYANO-RF’s maximum partial pressure for Oxygen is set to 1.4bar. The CYANO-RF dive computer does not support altitude diving, therefore it is prohibited to use the CYANO-RF when diving in altitudes. ● It is recommended that the user makes sure the CYANO-RF has atleast 50% or more battery life before executing 1 dive. ● ● All data of the last dive will be lost if the CYANO-RF switches off due to lack of battery. If so ever the CYANO-RF switches off during a dive it is recommended to the user not to dive atleast 48 hours prior to the last dive. It is recommended to access the CYANO app before exercising your 100th dive, ● for the CYANO-RF saves up to 99 dives ONLY and will delete the previous data's when exercising your 100th dive. ● Diving again within 5 minutes after reaching the surface will be regarded continuing your previous dive and the overall diving time will regard your short surface interval as part of the dive. After 5 minutes from reaching the surface, the dive will be regarded finish and your dive log will be saved. ● Important features such as Log Book Memories, peronal settings will be retained even after the watch is turned off or turned off due to no battery. But current time, daily alarms and few simple settings will be resetted. Please be adviced, buttons will not work during the continuous dive phase. ● It is recommended to avoid flying when the NO-FLY icon is displayed ignoring this may result to serious injury or death. ● Decompression table will not be calculated when diving with the Gauge mode ● when diving with the Gauge mode all responsibilities will be laid upon the user. Free diving is prohibited after diving for 12~18 hours. due to the danger of SWB (Shallow Water Black out) and DCI (Decompression Illness). ● Nitrox Diving is to be exercised ONLY by divers with Nitrox Specialty Certifications certified by Scuba Diving training organizations that are ● registered in the RSTC (Recreational Scuba Training Council). Exceeding EAN40 when Nitrox Diving exceeds the limits of recreational sports diving therefore it is prohibited to use this computer when ● diving with more than EAN40. Please be careful not to let the phone’s screen turn off when uploading your dives to the app. ● You may upload your divelogs by pressing divelog after connecting your application. Please be adviced that the CYANO-RF will switch off if not connected with the phone within 5 minutes after being switched ON. ● For further questions and inquiries please email us to the address below. [email protected] CYANO membership card must be kept and used ONLY by the first user when servicing the product and is prohibited from lending or giving to another user ● The following membership card will not be reprinted therefore please be cautious for losses. ● 2 Getting Starting App installation and Bluetooth connection The following product is sold after being reset, ！ Please follow the instructions below to use the CYANO-RF product Use Playstore for Android phones, and App Store for iOS phones Please connect to CYANO app with bluetooth 4A0503010 Sign up and Log In Turn on your computer(press the UP button) Click on the Bluetooth icon (Verify ID by clicking link sent to Email Required) (if computer does not turn on, please charge battery) (a pop up will be shown when bluetooth is turned off) Click the designated Serial number See if it is connected Edit your protocol settings (refer to your membership card or (Bluetooth icon turns blue when connected) by clicking on the settings computer screen for the serial number) Press on the Start button 3 Getting Starting Protocol Settings The following product is sold after being reset, ！ Please follow the instructions below to use the CYANO-RF product Use Playstore for Android phones, and App Store for iOS phones Check if basic measurements are set Enter Protocol Settings Set your date, time and GPS settings Check your watch (Please reconnect bluetooth (Date/Time/GPS will set automatically when clicked on) if not automatically set) Menu and Watch Face Watch face design (Theme / Color) Select measurements Select measurements Alarm settings Connected Computer Ver. Changing connected Comp. Reset Personalize your watch theme and color Protocol Settings Company Website Terms of Use Logging Out 4 Getting Starting Log Book The following product’s GPS feature uses the GPS feature of the user’s phone. To use the log book’s GPS feature, GPS settings should be set at the Protocol Settings after connecting through Bluetooth. Use Playstore for Android phones, and App Store for iOS phones Enter Dive Log Select the preffered Log Check your Dive data Type in a more detailed dive log Get your dive buddy or instructor to sign Share your dive log 5 Getting Starting Charging Place the CYANO-RF on the center top of the QI-charging pad and see if the charging light of the QI-charging pad changes from red to blue. note: misplacement may interupt charging speed of the computer. Take note the battery is a consumable material therefore battery use time may decrease as time passes The following device uses Li-Polymer battery. Lithium Polymer batteries are thinner and is lessdangerous to explosion compared to Lithium Ion batteries. Therefore it is safe, light, and strong against battery leaks which makes it a much stress-free battery Compatibility : any QI standard wireless rechargable device Use Time : Dive Mode - 10 hours at most Input : DC: 5V / 1A Time Mode - 18 hours at most (w/ sleep mode) Charging distance : 4~6mm Charging Time : 1hour 40minutes Stand by Mode - 15 days or more (power off) Please be aware when using Over charging may lead to defection of battery, explosion, serious injuries or death. Please do not expose to fire, and do not leave under sunlight and near water unattended The screen may display an unstable percentage of the battery life during charging It is to show the exact amount of battery at the current situation so please be adviced you may continue charging. For Battery Problems please refer to Defection Check up Q&A page 8 Getting Starting Buttons Checking Current Settings (Status) Menu / Enter / Up Back Enter Current Settings (Status) Current Settings (status) / Down by pressing the button PPO2 (Partial Pressure Oxygen) Battery life Change ONLY when Nitrox Diving Brightness Dive Log Bluetooth Personal Condition Alarm Surface Interval Gauge Mode Measurement Setting No-Fly Time No-Dive Time No-Fly Time Surface Interval It is best not to travel high altitudes and board a plane while the Surface Interval starts counting as the user surfaces out of water and changes No-Fly Time is counting down.