PMC-CAt-609 PHOTOCONTROLS & TIMERS TO SAVE ENERGY FOR OVER 50 YEARS. PMC-CAT-09-12 Locking Type Photocontrol 12V to 480V Button-Type In Fixture Direct Wire In Photocontrol Photocontrol Pole Mounted Digital Locking Type Push Button Auxillary Power Tap In Wall Timer 6-in-1 Schedules End Sensing Energy Saving Photocontrol /Timer On At Dusk, Off At Your Pre-Set Time Low Voltage Adjustable Photocontrols "Barrel" Type 12 & 24 VAC Photocontrol 24 VDC Easy On/Off Field Setting On Base. Lighting General Purpose Contactor 24 Hour 30 & 60 AMP Time Switch 40 AMP CUSTOMER PHONE SERVICE ALWAYS AVAILABLE 9AM TO 5PM WEEKDAYS EST 201-444-0600 Direct Wire-In Photocontrols (120 - 480 Volts) Heavy-duty Die-cast Enclosure Vandal Proof Lumatrol® “T” Series Lumatrol® “T-30” Wire-In Photo Control - 3000 Watts Cast Aluminum Housing photocontrols - Designed for Designed for those applications which demand more those locations where high vandalism creates high load switching than standard 15 amp. series can maintenance. The heavy-duty cast aluminum housing handle. is 20 times more resistant to high-impact objects (i.e. rocks, bats or small projectiles) than plastic housing. Specifications As the controlling element of the total lighting pack- Housing: Lexan enclosure. age (fixture, lamp ballast) and the least costly compo- Photocell: Broad surface sensing element. nent, it is most important that the control continue to Turn-on: 1 to 3 foot-candles. External light level slide allows function under all adverse conditions. field adjustment between 3 to 10 foot-candles. Specifications Turn-on/ 1:3 Turn-off Ratio: Housing: Vandal proof die cast aluminum housing. Switch Type: Single-pole, single-throw. Contact position at night Photocell: Broad surface sensing element. normally closed. Turn-on: 1 to 3 foot-candles. External light level slide allows Time Delay: Minimum 15 seconds. field adjustment between 3 to 10 foot-candles. Temperature -40˚ to 170˚ F. 1:3 Turn-on/ Range: Turn-off Ratio: Power 1.1 watts average at 120 VAC. Single-pole, single-throw. Contact position at night Switch Type: Consumption: normally closed. Rated Life: 5,000 operations minimum at rated load. Time Delay: Minimum 15 seconds. Threaded Stem: 1/2 inch-14 thread, and fits 1/2 inch knock out. Temperature -40˚ to 170˚ F. Range: Dimensions: 3’’ high, 2’’ wide, 1-3/8’’ deep. Lead Wire: Moisture proof, color coded lead wire. Ordering Guideline Wire length: 6 inches. Model Voltage Rating 1/2 inch-14 thread, and fits 1/2 inch knock out. Threaded Stem: T-30 120 3000 VA Dimensions: 3’’ high, 2’’ wide, 1-3/8’’ deep. T-368 208-277 3000 VA Ordering Guideline T-30DV 105-285 3000 VA Model Voltage Rating T-15-AL 120 1800 VA All Precision photocontrols T-168-AL 208-277 1800 VA are 100% compatible with T-30-AL 120 3000 VA compact fluorescent lamps. T-368-AL 208-277 3000 VA 2 Direct Wire-In Photocontrols (120 - 480 Volts) “ET” A-105 Series “T” “ST” A-105W Series Series U.L. recognized component with standard wall plate Lumatrol® “T”, “ET” & “ST” Series Lumatrol® “A” Series Wire-In Wire-In Photocontrols Photocontrols Specifications Specifications Housing: Weatherproof Lexan® housing. Housing: Durable, high impact Lexan® housing, ultrasonically Photocell: Broad surface sensing element. welded for maximum strength. Nylon locknut provided. Compact in size, A-105 can be mounted directly within a Turn-on: 1 to 3 foot-candles. External light level slide allows field lighting fixture or in lighting standards that are 2 inches adjustment between 3 to 10 foot-candles. in diameter or larger. Turn-on/ 1:3 Photocell: Broad surface sensing element. Turn-off Ratio: Turn-on: 1 to 3 foot-candles. Switch Type: Single-pole, single-throw. Contact position at night 1:3 normally closed. Turn-on/ Turn-off Ratio: Time Delay: Minimum 15 seconds. Switch Type: Single-pole, single-throw. Contact position at night Temperature -40˚ to 158˚F. normally closed. Range: Time Delay: Minimum 15 seconds. Lead Wire: Moisture proof, color coded lead wire. -30˚ to 140˚ F. Wire length: 6 inches. Temperature Range: Threaded Stem: 1/2"-14 thread, and fits 1/2" knock out. Swivel T-Series (ST) is equipped with a swivel mount which allows Lead Wire: Color coded lead wire. Wire length: 15 inches. installer to swivel light sensitive element to the best Threaded 3/8 inch-18 thread; threaded stem 3/4 inches long. position for operation. Stem: Dimensions T Series: 2’’ high, 1-1/2’’ wide, 1’’ deep. Dimensions: 2” high, 1-1/4” wide, 3/4” deep (1-1/2” deep including ST Series: 2’’ high, 1-1/2’’ wide, 1’’ deep (body); 2’’ high, (stem). threaded stem). ET Series: 3½" high, 1" diameter Model Voltage Rating A-105* 120 1000 VA Ordering Guideline A-1068* 208-277 1000 VA Model Voltage Rating A-347† 347 1000 VA ST-15*, T-15* 120 1800 VA A-105W†** 120 1000 VA ST168, T-168 208-277 1800 VA A-1068W** 208-277 1000 VA ST-19**, T-19** 480 1800 VA ** Complete with gasketed metal wall plate (2¾" x 4½"), mounting screws, ST-347** 347 1800 VA and two nylon locknuts so that units will fit any standard outlet box. ET-15 120 1800 VA * UL Recognized & CSA Certified †CSA Certified only. ET-168 208-277 1800 VA Note: The body or housing of all "A" style models must be mounted in a ** Dimensions: 3” high, 2” wide, 1³⁄₈” deep. weather proof enclosure to assure protection from water damage. Only * ETL listed. threaded portion is weather proof. 3 For Direct Wire, Low Voltage Applications LCA SERIES LCS SERIES 24 VDC/VAC 24 VDC/VAC and 12VDC and 12VDC Lumatrol® Low Voltage Lumatrol® Low Voltage “Stem Mount” Photocontrols “Button Type” Photocontrols Specifically designed for a 12 volt DC, or 24 volt AC/DC Specifically designed for inside compatible light fixtures battery operated light source or low voltage control or in weatherproof enclosures 2” in diameter or larger. circuits. Rated at 70º C to operate in high tempera- tures near solar modules. Specifications Housing: Durable, high impact Lexan® housing, ultrasonically welded Specifications for maximum strength. Nylon locknut provided. Compact in Housing: Weatherproof Lexan® housing. size, LCA series can be mounted directly within a lighting fix- ture or in lighting standards that are 2'' in diameter or larger. Turn-on: 1 to 3 foot-candles. Turn-on: 1 to 3 foot-candles. Turn-on/ 1: 1.5 Turn-off Ratio: Turn-on/ 1:1.5 Switch Type: Single-pole, single-throw. Contact position at night Turn-off Ratio: normally closed. Switch Type: Single-pole, single-throw. Contact position at night normally Time Delay: 1-5 seconds. closed. 1-5 seconds. Threaded Stem: 1/2 inch-14 thread, and fits 1/2 inch knock out. Time Delay: Swivel Series is equipped with a swivel mount which Threaded Stem: 3/8 inch-18 thread; threaded stem 3/4 inches long. allows installer to swivel light sensitive element to Dimensions: 2” high, 1-1/8” wide, 1-3/4” deep (2” deep w/threaded stem). the best position for operation. 2’’ high, 1-1/2’’ wide, 1’’ deep. Dimensions : “LCA” Series Power Dissipation: 12-1/2 MA@ 12VDC Model Voltage Rated Load LCA-612D 12 VDC 10 AMP “LCS” Series LCA-624A 24 VAC 10 AMP Model Voltage Rated Load LCA-624D 24 VDC 10 AMP LCS-612D 12 VDC 10 AMP† LCA-612AW* 12 VDC 10 AMP LCS-624D 24 VDC 10 AMP† LCA-624AW* 24 VAC 10 AMP * Wall plate models. LCS-624A 24 VAC 10 AMP† (See bottom of page 3 for wall LCA-624DW* 24 VDC 10 AMP plate dimensions.) † Non-inductive. Photocontrol 24 VAC ORANGE LOW VOLTAGE RED + CONTROL PHOTOCONTROLS Lamp Load Load (black) (red) WIRING DIAGRAMS (white) POWER Neutral LOAD (white) 48, 24 & BLACK Line (black) – 12 VDC (white) (black) TYPICAL WIRING (DC) 4 Locking Type, Low Voltage Lighting Applications LCP SERIES + M2ANB-LV Locking Type Receptacle Model M2ANB-LV for all low voltage, locking type control applications. Comes with housing and receptacle (½" threaded stem). See page 7 for model M2A. M2ANB-LV Specifications Locking-type, polarized receptacle with 14'' 48 VDC, 24 VDC and 12 VDC 14 AWG color coded leads Leads: Red (+). Black (-) and Orange (Load). Low Voltage Locking Type Dimensions: 2⁵⁄₈" high (incl. ½" stem), diameter 2 ¾" Photocontrols Rated Load: 10 AMP Available in 48 VDC, 24VDC & 12 VDC Rated at 170˚ F to operate in high temperatures near solar models. DO NOT USE WITH AC RECEPTacLES! Twistlock format for easy replacement. Precision's low-voltage twistlock system is designed for low voltage DC use only! To avoid LCP Specifications mis-application use Precision's low-voltage Housing: UV stabilized high-impact polypropylene base, M2ANB-LV with orange "load" wire. Sensor: Sealed Silicon Sensor Turn-on: 1 to 3 foot-candles Turn-on/ 1:1.5 Turn-off Ratio: LCP Low Voltage Wiring Diagrams Switch Type: Single-pole, single-throw. Contact position at night normally closed. DIRECT WIREIN Time Delay: 1 to 5 seconds. PHOTO CONTROL OR LOCKING TYPE RECEPTICAL Temperature -40˚ to 170˚ F load Range: red orange (+) to be Power 10 MA switched Dissipation: Rated Life: 5,000 operations minimum at rated load black Rated Load: 10 AMP Surge Protection: MOV (Metal Oxide Varistor) (-) Dimensions: 3.07” diameter, 2.15” high. DC color codes: Red = Positive (+) Ordering Guideline Orange = Load Model Voltage Rated Load Black = Negative (-) LCP-48 48 VDC 10 AMP LCP-24 24 VDC 10 AMP LCP-12 12 VDC 10 AMP 5 Locking-Type Photocontrols (120 - 285 Volts) C US C US Locking-Type Photocontrols- Utility-Grade Electronic Series Delayed Response Thermal Series Built-in time delay prevents false cycling caused by 1 to 1.5 on/off ratio for maximum energy savings.