RHC0318-017183M | LAST UPDATED: DECEMBER 28, 2020 Each letter and train engine measures Special Technique about 6" [15 cm] tall. Adjustable-ring = Wrap yarn into a ring, ensuring that the tail falls behind the Special Stitches working yarn. Grip ring and tail between Bpdc (back post double crochet) = middle finger and thumb. Insert hook Yarn over, insert hook from back side of through center of ring, yarn over (with work to front and to back again around working yarn) and draw up a loop. Work the post of indicated stitch; yarn over stitches of first round in the ring. After CROCHET and pull up a loop (3 loops on hook), the first round of stitches is worked, pull SKILL LEVEL [yarn over and draw through 2 loops on gently on tail to tighten ring. EASY hook] twice. Skip the stitch "in front of" the Bpdc. Notes dc-spike (double crochet spike stitch) = 1. Each letter can be worked by Yarn over, insert hook in indicated stitch following the written instructions or Designed by Kj Hay or space in row/round below and pull up the stitch diagram. a loop to the height of the current row, 2. Each letter is made from two identical What you will need: [yarn over and draw through 2 loops on pieces, front and back, and long hook] twice. narrow side piece(s). The side pieces RED HEART® Super Saver®: Fsc (Foundation single crochet) = are slip stitched to the edges of the 1 skein each, 3950 Charcoal *Insert hook in "chain" of previous stitch front and back pieces. Letters are A, 256 Carrot B, 319 Cherry Red C, 316 Soft White D, 512 and draw up a loop, yarn over, draw stuffed before final edge(s) of side Turqua E, 3945 Blue Suede F, through 1 loop on hook (the "chain"), pieces are slip stitched to the back. 672 Spring Green G yarn over and draw through both loops 3. Row numbers in written instructions Note: A, B, C, and D are on hook; repeat from * for indicated correspond to row numbers shown in needed for train engine. Any number of stitches. Note: This method the stitch diagrams colors of your choice can be adds foundation single crochet stitches 4. Use any colors desired to crochet used for letters. E, F, and G to the end of a row. A foundation single letters. are only used in letters of crochet consists of a base chain and a 5. Train engine is worked in pieces that photographed sample. single crochet worked at the same time. are sewn together. Susan Bates® Crochet Hook: Fpdc (Front post double crochet) = 5mm [US H-8] Yarn over, insert hook from front side of work to back and to front again around TRAIN ENGINE Fiberfill stuffing, yarn needle post of indicated stitch, yarn over and ENGINE pull up a loop (3 loops on hook), [yarn Boiler GAUGE: 12 sts = 4" [10 cm]; over and draw through 2 loops on hook] Beginning at front end with A, make an 16 rows = 4" [10 cm] in twice. Skip the stitch "behind" the Fpdc. adjustable ring. single crochet. CHECK YOUR Join with sc (join with single crochet) = Round 1 (right side): Ch 1, work 6 sc in GAUGE. Use any size hook to Name Train Place a slip knot on hook, insert hook in ring; join with slip st in first sc. obtain the gauge. A personalized train is a super way to make indicated stitch, yarn over and draw up Round 2: Ch 1, 2 sc in each st around; RED HEART® Super a kid feel special! Crochet the engine, then a loop, yarn over and draw through both join with slip st in first sc—12 sc. , Art. E300 Saver® all the letters in his or her name. Colors can loops on hook. continued... available in solid sc2tog (single crochet 2 stitches color 7 oz (198 g), 364 yds be customized to the décor of the child’s together) = [Insert hook in next stitch, (333 m); prints, multis and room. Great for learning your letters and yarn over and pull up a loop] twice, yarn heathers 5 oz (141 g), 236 yds over and draw through all 3 loops on (215 m); flecks 5 oz (141 g), how to spell your own name. 260 yds (238 m) skeins hook. FindFOR ACCESSIBILITY more ideas SUPPORT, & inspiration: PLEASE CONTACTredheart.com CUSTOMER CARE AT 1-888-368-8401 OR [email protected]. NAME TRAIN | CROCHET 1 of 18 ©2016 Coats & Clark Page 1 of 18 RHC0318-017183M | LAST UPDATED: DECEMBER 28, 2020 Round 3: Ch 1, [sc in next st, 2 sc in next Round 6: Slip st in each st around. st] 6 times; join with slip st in first sc— Fasten off. Sew smoke stack to top of 18 sc. boiler centered over first B-colored Round 4: Ch 1, [2 sc in next st, sc in next stripe. 2 sts] 6 times; join with slip st in first sc—24 sc. Cab Roof Round 5: Ch 1, [sc in next 2 sts, 2 sc in With A, make an adjustable ring. next st, sc in next st] 6 times; join with Round 1 (right side): Ch 1, sc in ring, [ch slip st in first sc—30 sc. 2, sc in ring] 3 times, ch 2; join with slip Round 6: Ch 1, working in back loops st in first sc—4 sc and 4 ch-2 spaces. only, sc in each st around; join with slip Round 2: Ch 1, sc in first st, (sc, ch 2, sc) st in first sc. in next ch-2 space (corner made), [sc in Rounds 7 and 8: Ch 1, sc in each st next st, (sc, ch 2, sc) in next ch-2 space] around; join with slip st in first sc. 3 times; join with slip st in first sc—12 Fasten off. sc (3 sc on each of 4 sides between Round 9: With right side facing, join B corners) and 4 ch-2 corner spaces. with sc in first sc, sc in each remaining Rounds 3–5: Ch 1, [sc in each st to st around; join with slip st in first sc. next corner ch-2 space, (sc, ch 2, sc) in Round 10: With B, ch 1, sc in each st corner ch-2 space] 4 times, sc in each around; join with slip st in first sc. st around; join with slip st in first sc—36 Fasten off. sc (9 sc on each of 4 sides between Round 11: With right side facing, join A corners) and 4 ch-2 corner spaces at with sc in first sc, sc in each remaining the end of Round 5. st around; join with slip st in first sc. Round 6: Ch 1, working in front loops Rounds 12–16: With A, ch 1, sc in each st only, [sc in each st to next corner ch-2 around; join with slip st in first sc. space, (sc, ch 2, sc) in corner ch-2 Fasten off. space] 4 times, sc in each st around; Rounds 17 and 18: With B, repeat join with slip st in first sc—44 sc (11 sc Rounds 9 and 10. Fasten off. on each of 4 sides between corners) Rounds 19-22: With A, repeat Rounds and 4 corner ch-2 spaces. 11–14. Fasten off. Fasten off. Stuff piece. Round 7: With right side facing join B with slip st in any st, slip st in each st Smoke Stack around. With A, ch 6; join with slip st in first ch Fasten off. to form a ring. Round 1: Ch 1, work 6 sc in ring; join Cab Box with slip st in first sc. Round 1 (right side): With wrong side Rounds 2 and 3: Ch 1, sc in each st (bottom) of roof facing and working around; join with slip st in first sc. with outer edge of roof facing you, join Round 4: Ch 1, 2 sc in each st around; C with sc in free loop of 5th st (center join with slip st in first sc—12 sc. st) of one of the sides of Round 5, sc in Round 5: Ch 1, sc in each st around; join each st around skipping the ch-2 corner with slip st in first sc. spaces; join with slip st in first sc—36 sc. continued... Find more ideas & inspiration: redheart.com ©2016 Coats & Clark Page 2 of 18 FOR ACCESSIBILITY SUPPORT, PLEASE CONTACT CUSTOMER CARE AT 1-888-368-8401 OR [email protected]. NAME TRAIN | CROCHET 2 of 18 RHC0318-017183M | LAST UPDATED: DECEMBER 28, 2020 Round 2: Ch 1, turn, sc in first 4 sts, Fasten off. Stuff cab. Sew base to lower Fasten off leaving a long tail for sewing Center Bar sc2tog, [sc in next 7 sts, sc2tog] 3 times, edge of cab, adding more stuffing as axles together. Sew the ends of two Row 6 (join legs – wrong side): Ch sc in last 3 sts; join with slip st in first you sew, as needed. axles together to make a total of three 1, turn, sc in each st to last st, 2 sc in sc—32 sc. pairs of wheels and axles. last st, ch 10 (for base of center bar); Round 3: Ch 1, turn, [sc in each st WHEEL AND AXLE (make 6) working in sts of last row of right leg, 2 to next sc2tog, Fpdc around sc2tog With A, make an adjustable ring.