BUYTSI OPERATIONS MANUAL MODEL 525 SPINNER READ these instructions before placing unit in service KEEP these and other materials delivered with the unit in a binder near the machine for ease of reference by supervisors and operators 3451 South 40th Street | Phoenix, Arizona 85040 | Toll Free 800.223.4540 | Arizona 602.437.5020 | Fax 602.437.5025 Warranty Statement & Return Policy SAFETY INSTRUCTIONS Owner’s Responsibility To maintain machine and user safety, the responsibility of the owner is to read and NOTICE follow these instructions: Read entire manual before assembling, installing, operating, or servicing this equipment Warranty & Workmanship you can depend on. • Follow all installation instructions. • Make sure installation conforms to all applicable Local, State, and Federal TSISSG products are designed and developed by experts in their respective industries. Our passion for designing and testing is second Codes, Rules, and Regulations; such as State and Federal OSHA Regulations only to our drive for creating industry innovations and real world solutions which our customers can depend upon. With over 25 years of and Electrical Codes. manufacturing experience we maintain the ability to provide competitive prices while employing and manufacturing in the USA. We are the manufacturer of virtually all our products so taking pride in workmanship and standing behind each and every product is not just our • Carefully check the unit for correct initial function. claim but our uncompromising responsibility. • Read and follow the safety instructions. Keep them readily available for machine operators. TSISSG products are warranted to be free from defective workmanship for a period of (90 days) from the date of original purchase to • Make certain all operators are properly trained, know how to safely and correctly original owner. Repair labor is warranted for (90 days) from date of original purchase. Bushings, bearings and normal wear and tear operate the unit, and are properly supervised. are not covered under warranty. Blades for the tire cutters are not covered under the warranty. Careless handling, negligence, misuse, • Allow unit operation only with all parts in place and operating safely. abuse, mutilation, improper operation, making unauthorized repairs, additions, and or alterations automatically cancels this guarantee and relieves TSISSG of any obligation. Any warranty parts need to be returned, prepaid, to the plant listed on the RGA for credit. Any • Carefully inspect the unit on a regular basis and perform all maintenance as warranty parts shipped from the plant will be shipped at the customer's expense. Material or product returned to the wrong plant will be required. refused. Any warranty work needed on a machine must be brought to the manufacturing plant in Monticello, MN or authorized by TSISSG. • Service and maintain the unit only with authorized or approved replacement parts. • Keep all instructions permanently with the unit and all decals/labels/notices on Return Policy: the unit clean and visible. !!WARNING!! Goods returned without RGA will be refused. All returns will be subject to a 15% handling charge, plus any additional • Do not override safety features. charges for reconditioning and repackaging. A returned goods authorization (RGA) form must be obtained before returning any material or goods. All material or goods must be returned within 15 days of RGA date or RGA will be void. Operator Protective Equipment Personal protective equipment helps make tire servicing safer. However, equipment does not take the place of safe operating practices. Always wear durable work clothing during tire service activity. Loose fitting clothing should be avoided. Tight fitting leather gloves are recommended to protect operator’s hands when handling worn tires and wheels. Sturdy leather work shoes with steel toes and oil resistant soles should be used by tire service personnel to help prevent injury in typical shop activities. Eye protection is essential during tire service activity. Safety glasses with sideshields, goggles, or face shields are acceptable. Back belts provide support during lifting activities and are also helpful in providing operator protection. Consideration should also be given to the use of hearing protection if tire service activity is performed in an enclosed area, or if noise levels are high FAILURE TO READ AND FOLLOW ALL WARNINGS AND INSTRUCTIONS IN THIS MANUAL CAN LEAD TO SERIOUS PERSONAL INJURY OR DEATH TO OPERATOR OR BYSTANDER. THE OWNER IS RESPONSIBLE FOR MAINTAINING THE OPERATION INSTRUCTIONS AND DECALS FOR OPERATOR REFERENCE. DIVISION OF TSI/SSG FOR ADDITIONAL COPIES, CONTACT TSI TM WWW.TSISSG.COM 800.223.4540 3451 South 40th Street | Phoenix, Arizona 85040 | Toll Free 800.223.4540 | Fax 602.437.5025 | www.tsissg.com 3451 South 40th Street | Phoenix, Arizona 85040 | Toll Free 800.223.4540 | Arizona 602.437.5020 | Fax 602.437.5025 MODEL 525 SPINNER The Model 525 Spinner is a heavy duty, continuous service, overload protected auto and truck spinner. They are available in 7.5 HP three phase or 5 HP single phase. The 7.5 HP is preferred when spinning duals. Wiring should be performed by a qualified electrician using #10 wire. Branch fuse size should be 60 amps per line or approximately 3 times running amps. Adequate heater protection is provided in control box to protect motor. Rotation of the spinning bell would be clock-wise looking into the side of the bell. This making tire being spun to rotate downward at the spinner. This makes the brake work properly. Wheels being spun are jacked up 2 to 3 inches with a good sturdy jack. The 501-a pick up unit is placed under the vehicle close to the tire. The spinner is switched on before being applied to the wheel. Push against the wheel until sufficient speed is reached to find heavy spot on the tire. The brake is slid over spinning bell and applied to the wheel. Weight is applied to light side of wheel. The action of spin-up and brake is repeated until the tire is balanced and will have no shake. � PHOENIX,AZ •MONIICEIJ.0,1114 1.-aM6tO 525 TIRE SPINNER JAN. 13, 2012 � @ � � � 525 TIRE SPINNER REPAIR PARTS BOM 2 of 2 PN: 0000 BEGINNING SERIAL NO.0000 Jan. 13, 2012 PARTS LIST PARTS LIST ITEM PART NO. DESCRIPTION QTY ITEM PART NO. DESCRIPTION QTY 1 6251 BRAKE WELD 1 30 15081 COVER, CONTROLS 1 2 6255 WHEEL, ROLLER 1 31 15160 DECAL - AMERMAC/STI LARGE 2 3 6256 BASE, AXLE 1 32 15251 SLIDE PIN, HANDLE 2 4 6338 HANDLE, WELD 1 33 15254 WHEEL, ROLLER CASTER 2" OD 1 5 6357 FENDER COVER, WELD 1 34 15329 WASHER, FENDER 3/8 X 1-1/2 2 6 6358 BRAKE, WHEEL STOP 1 35 15425 SHAFT, BRAKE BAR 1 7 212 NUT 3/8-16 HEX NYLOK 6 36 15463 CORD 10/4 AWG AR 8 226 NUT 1/4-20 NYLOK 4 37 15468 WHEEL, 8"OD X 2-1/2" WIDE 2 9 445 WASH 1/4 FLAT 10 38 15469 HANDLE, RED GRIP, LARGE 2 10 566 NUT 5/16-18 NYLOK 3 39 15470 HANDLE, RED GRIP, SMALL 2 11 700 WASHER 3/8 WROUGHT 10 40 15471 KNOB, HANDLE - PIN 2 12 705 ELEC FLEX CONNECT 4 41 DECAL - MADE IN USA 1 13 804 WIRE NUT IDEAL #74 YELLOW 4 42 14 903 HHCS 1/4-20 X 3/4 GR2 12 43 15 1306 HHCS 3/8-16 X 1.0 8 44 16 1308 SHSS 3/8-16 X 5/16 CUP POINT 2 45 17 1318 WASHER 5/16 WROUGHT 3 46 18 1354 WASHER 3/8 LOCK 6 47 19 1819 SELF TAP 1/4-20 X 3/4 WASHER HEAD 4 48 20 3404 HHCS 3/8-16 X 2 2 49 21 3500 HHCS 3/8-16 X 1-1/2 GR5 4 50 22 4134 WASHER 1/4 SPRING LOCK PLATED 6 51 23 4241 SHSS 1/4-20 X 1/4 CUP POINT PLAIN 2 52 24 4569 HWHST #10-24 X 3/4 TYPE 23 PLATED 4 53 25 4782 DECAL - SAFETY GLASSES 1 54 26 4816 HWHST 5/16 X 3/4 3 55 27 10678 SWITCH, SINGLE PHASE 3 56 15048 MOTOR 5 HP, 3500 RPM, 208/230V 1PH 1 57 28 15049 MOTOR 7-1/2 HP, 3500 RPM, 208-460V 3PH REF 58 29 15080 COVER, ROLLER 1 59 Warranty StatementDIVISION OF &TSI/SSG Return Policy TM WWW.TSISSG.COM Warranty & Workmanship you can depend on.800.223.4540 TSI products are designed and developed by experts in their respective industries. Our passion for designing and testing is second only to our drive for creating industry innovations and real world solutions which our customers can depend upon. With over 25 years of manufacturing experience we maintain the ability to provide competitive prices while employing and manufacturing in the USA. We are the manufacturer of the majority of our products so taking pride in workmanship and standing behind each and every product is not just our claim but our uncompromising responsibility. TSI equipment is warranted to be free from defects in materials and workmanship for a period of one year from the date of original purchase to the original owner. Repair labor is warranted for 90 days from the date of original purchase. Bushings, blades, bearings and normal wear and tear are not covered under warranty. Careless handling, negligence, misuse, abuse, mutilation, improper operation, making unauthorized repairs, additions, and or alterations automatically cancel this warranty and relieves TSI of any obligation. Cheetah tanks claimed to be defective while under warranty will be evaluated at our manufacturing plant and either repaired if possible or exchanged and returned or credit issued to the customer account at our discretion. Damage resulting from dropping the tanks will not receive warranty consideration.