PROXIMITY FUZES THEORY AND TECHNIQUES PROXIMITY FUZES THEORY AND TECHNIQUES VK ARORA Former Director Defence Science Centre Delhi DEFENCE RESEARCH AND DEVELOPMENT ORGANISATION MINISTRY OF DEFENCE NEW DELHI 110 105 2010 DRDO MONOGRAPHS/SPECIAL PUBLICATIONS SERIES PROXIMITY FUZES: THEORY AND TECHNIQUES VK ARORA Series Editors Editor-in-Chief Asso. Editor-in-Chief Sr. Editor Editor Dr AL Moorthy Shashi Tyagi Vinod Kumari A Saravanan Asst. Editor Editorial Asst Printing Marketing Kavita Narwal Gunjan Bakshi SK Gupta Rajpal Singh Cataloguing in Publication Arora, VK Proximity fuzes: Theory and Techniques DRDO monographs/special publications series. 1. Proximity fuze 2. Oscillators 3. Photodetectors 4. Antennas I. Title II. Series 623:614.8.086.4 © 2010, Defence Research & Development Organisation, New Delhi 110 105. ISBN: 978-81-86514-29-0 All rights reserved. Except as permitted under the Indian Copyright Act 1957, no part of this publication may be reproduced, distributed or transmitted, stored in a database or a retrieval system, in any form or by any means, electronic, mechanical, photocopying, recording, or otherwise, without the prior written permission of the Publisher. The views expressed in the book are those of the author only. The editors or Publisher do not assume responsibility for the statements/opinions expressed by the author. Designed, produced and printed by Director, DESIDOC, Metcalfe House, Delhi110 054. Contents Preface xi CHAPTER 1: HISTORY OF PROXIMITY FUZES 1.1 Significance and Background of the Radio Proximity Fuze in World War II 1 1.2 Development Work in the Department of Terrestrial Magnetism 2 1.3 Research and Development Work at Applied Physics Laboratory 4 1.4 Development Work at National Bureau of Standards 4 1.5 Tests 5 1.6 Production Scale-up 5 1.7 A Striking Combat Success 6 1.8 Electronic Countermeasures 6 1.9 Development of Proximity Fuzes 7 1.10 Post-War Developments 7 1.11 Brief History of Development of Proximity Fuzes in India (1966-1975) 8 CHAPTER 2: PROXIMITY FUZES: AN OVERVIEW 2.1 Introduction 11 2.2 Basics of Proximity Fuzes 12 2.3 Radar Proximity Fuzes 14 2.4 Laser Proximity Fuzes 24 2.5 Pulsed Time of Flight Method 26 2.6 Beam Modulation Telemetry 26 2.7 Electronic Countermeasures 27 2.8 Electronic Counter Countermeasures 28 2.9 Antennas 30 2.10 Fuze Nose Cones 34 2.11 Oscillators 35 2.12 Power Sources/Reserve Battery of Proximity Fuzes 36 2.13 Safety and Arming 38 2.14 Shock and Acceleration 40 2.15 Fuze Classification 42 2.16 Evolution of Fuze Technology 47 2.17 Military Standards 48 CHAPTER 3: FUZE RANGE EQUATIONS 3.1 Introduction 49 3.2 Range Equations for Point Targets in Noise 50 3.3 Fuze Range Equation for CW and FMCW Radar 53 3.4 Range Equation for an Area Target 54 3.5 Fuze Equation for Self-Protection Jammers 56 3.6 Range Equation for Pulsed Laser Proximity Fuzes 58 CHAPTER 4: RESERVE BATTERY 4.1 Introduction 63 4.2 Basic Power Sources 63 4.3 Applications 70 CHAPTER 5: OSCILLATORS 5.1 Introduction 73 5.2 Specifications of Fuze Oscillators 73 5.3 Basics of Oscillators 75 5.4 Design Approach 76 5.5 Oscillator Limiting 83 5.6 Power Output of the Oscillators 83 5.7 Resonators 84 5.8 Active Devices 86 5.9 Voltage Controlled Oscillators 87 5.10 Phase Noise 89 CHAPTER 6: MIXERS 6.1 Introduction 95 6.2 Basics of Mixers 95 6.3 Mixer Archtecture 96 6.4 Mixer Properties 99 6.5 Mixer Non-Linearity 99 6.6 Self-Mixing in Mixers 103 6.7 Fuze Mixer Requirements 103 6.8 Mixers for Fuze Receiver 104 6.9 General Consideration in Optimisation of Mixer Performance 112 6.10 FET Resistive Mixers 113 CHAPTER 7: ANTENNAS 7.1 Introduction 121 7.2 Basic Charactristics of Microstrip Antenna 121 7.3 Feed Techniques 122 7.4 Bandwidth Enhancement Techniques 124 vi 7.5 Characteristics of Patch Antennas 130 7.6 Basic Characteristics 131 7.7 Design Examples 135 CHAPTER 8: FMCW PROXIMITY FUZES 8.1 Introduction 139 8.2 Basic Structure of FMCW Fuzes 140 8.3 Attributes of FMCW System 140 8.4 Basic Aspects of FMCW System 142 8.5 Range Resolution 147 8.6 Range Accuracy 148 8.7 Bandwidth Requirement 151 8.8 Transmitter/Receiver Leakage 151 8.9 ECM Systems 155 8.10 ECCM Systems 157 CHAPTER 9: LASER SOURCES AND PHOTODETECTORS 9.1 Introduction 159 9.2 Diode Laser 159 9.3 Characteristics of Laser Diodes 161 9.4 Microchip Solid State Lasers 163 9.5 Q-Switched Microchip Lasers 164 9.6 Photodiodes for the Laser Range Finders 165 9.7 Broad Features of Avalanche Photodiodes 165 9.8 Structure of APD 166 9.9 APD Parameters 167 9.10 Choice between Pin Diode and APD for LRF 172 CHAPTER 10: NANOSECOND PULSE GENERATOR 10.1 Introduction 173 10.2 Requirements of Laser Diode Driver 173 10.3 Avalanche Transister Pulse Generator 174 10.4 MOSFETS 180 10.5 Techniques for Achieving Fast Switching 186 CHAPTER 11: LASER PROXIMITY FUZES 11.1 Introduction 189 11.2 The Basic Principle and Structure of a Pulsed Laser Range Finder 190 11.3 Transmitter 191 11.4 Receiver 192 11.5 Subsystems of Proximity Fuze Receivers 194 11.6 System Considerations 203 vii 11.7 Solar Background Radiation 206 11.8 Range Equation for Anti-aircraft Fuze 209 11.9 Laser Radar Equation for the Clutter due to Fog and Clouds 212 Index 215 viii Preface This monograph deals with theory and design aspects of RF-FMCW and Laser proximity fuzes. The book begins with a short history of development of proximity fuzes. The successful development of the fuze by the US during the Second World War was an outstanding technical achievement. Though the Radar, a more complex system had been developed and used during the war, there were unique features of the proximity fuzes which made its development extremely difficult. The ability of the fuzes using vacuum tubes to withstand g shocks of ten of thousands when fired from the gun, was considered a formidable task. The development of the fuzes was so significant that many experts consider this to be next only to the development of atomic bomb. The history of development in India from 1966 to 1975 is also briefly covered. Lack of technical literature on the proximity fuzes was the key motivation to write this monograph. The book will be useful at many levels: Professionals who specialise in allied/areas such as a missiles, young engineers who are entering the fuze development programmes, military personnel who use these fuzes and electrical/ electronics engineers for general reading. The book is divided into three main subject areas. The first section considers the basics of proximity fuzes. The second section deals with FMCW fuzes. The last section covers the latest Laser Proximity Fuzes. Chapter 2 gives an overview of Proximity Fuzes. This chapter contains material everyone associated with proximity fuzes should know, in particular, the users and the decision makers. This chapter covers the evolution of CW proximity fuzes from fuzes developed during the second World War to the FMCW fuzes which became the workhorse fuze after the 1980s and continues to be most effective proximity- sensor till today. This chapter gives an overview of all of the subsystems of FMCW and the recent Laser proximity fuzes. The chapter also addresses the problem of g - several tens of thousands which the fuzes for high speed artillery and anti aircraft shells have to withstand. Chapter 3 on the fuze range equations is a standard material available in Radar texts but is included for the basic orientation and for the sake of completeness. Chapter 4 deals with reserve battery and power sources required by all types of fuzes - FMCW, their variants and Laser proximity fuzes. Chapters 5, 6 and 7 deal with of FMCW fuzes and their sub-systems. Chapter 5 deals with voltage controlled oscillators. In particular the importance of phase and amplitude noise of oscillator is addressed because low phase and amplitude noise are a fundamental requirement of fuzes. The active devices which achieve the objective of low noise are considered and compared. Chapter 6 on the mixers deals with highly linear mixers - Gilbert cell mixers and FET resistive mixers. High degree of linearity is a basic prerequisite of mixers since the modern fuzes operate in an intense environment of Electronic Counter Measure (ECM). ECM signals can penetrate into the receiver through the mixer non-linearity. Chapter 7 deals with microstrip antennas for fuzes. These antennas can be used with a wide range of fuzes which requires a radiation pattern along the projectile axis such as fuzes for bombs, mortars and high angle artillery shells. Fuze antennas need a fairly high impedance bandwidth to reduce reflections from a common antenna system which most conventional ammunition are constrained to use. This chapter considers various options to achieve high bandwidth. Chapter 8 on the FMCW fuzes contains the basic general principles of FMCW and explains the unique properties of FMCW fuzes .The problem of single antenna FMCW fuzes, that of the leakage of transmitted power with its attendant noise to the receiver are considered. The chapter demonstrates that a low noise VCOs and a highly linear mixer make the FMCW fuzes as one of the best proximity sensors. The third section of the book discusses the pulsed laser proximity fuze with its two most important subsystems, viz., the laser sources, the photodetectors and nanosecond pulse generators to drive the laser source. Chapter 9 covers the specific sources and their properties that make them eminently suitable for pulsed laser fuzes.