No Power No Hot Water Lights Are Not Working Garbage Disposal Is

No Power No Hot Water Lights Are Not Working Garbage Disposal Is

No power • Confirm that there is electricity connected in your home. • Check your fuse box. There may have been an overload. Check whether safety switch has been activated. Resetting may be needed. • Check appliances. Unplug all of them in the unit. It is required to start the safety switch in the meter box again. • Contact your Electricity Company. There may be some troubles in the street. No hot water • Check whether it’s time to refill your hot water system. • Check the fuse in the meter box. • Check whether your pilot light has gone out. If you can’t replace it on your own, contact the office or enter a maintenance request through your online portal. Lights are not working • Try to replace the light bulb. • Check your fuse box. If there is an overload the safety switch may need resetting. Garbage disposal is broken • Check whether it is turned on at the switch underneath the sink. • Reset the safety switch. A little re-d or black button underneath the bottom of the garbage disposal unit. • Is there a blockage in the sink/blades? Please keep in mind, before putting your hands or a utensil down the sink, check for blockages – make sure unit is turned off or unplugged. Blocked sink • If your sink is draining the water away too slowly, try using drain cleaner to free the blockage. • Try to clear hairs and old soap from the waste. Try to pour boiling water down the drain, this will help to unclog blockage. • Try to remove old food from the kitchen waste and pour boiling water down the drain. Washing machine is broken • Check whether the washing machine taps are turned on at the wall. • Check whether appliance at the wall is turned on. • Check whether the lid is closing properly. • If the machine has stopped working halfway through a cycle you may have overloaded the machine and make sure that it is not out of balance, try to rearrange the items evenly in the bowl. Dryer is not working • Dryers can automatically shut down due to overload of lint in the filter. Check whether the filter needs to be cleaned properly .

View Full Text

Details

  • File Type
    pdf
  • Upload Time
    -
  • Content Languages
    English
  • Upload User
    Anonymous/Not logged-in
  • File Pages
    1 Page
  • File Size
    -

Download

Channel Download Status
Express Download Enable

Copyright

We respect the copyrights and intellectual property rights of all users. All uploaded documents are either original works of the uploader or authorized works of the rightful owners.

  • Not to be reproduced or distributed without explicit permission.
  • Not used for commercial purposes outside of approved use cases.
  • Not used to infringe on the rights of the original creators.
  • If you believe any content infringes your copyright, please contact us immediately.

Support

For help with questions, suggestions, or problems, please contact us