SAE/KSAE 2013 International Powertrains, Fuels & Lubricants Meeting Technical Session Schedule As of 10/27/2013 07:40 pm Monday, October 21 Powertrain Actuators and Sensors Session Code: FFL302 Room 300 Session Time: 13:30 Organizers - Xuefei Chen, Chrysler LLC; Peter J. Maloney, MathWorks Inc. Chairpersons - Youngil Jeong, Korea Institute of Machinery & Materials; Han Ho Song; J. E. Yoon, Seungchang Air Tech. Co., Ltd. Time Paper No. Title 1:30 p.m. 2013-01-2495 Sensor Fusion for Liquid Level Detection in Tanks Mounted on a Heavy Duty vehicle Jonas Karlsson, Ola Stenlåås, Scania CV AB 2:00 p.m. 2013-01-2496 Electromechanical Clutch Actuator: Design, Analysis and Experiments Vikram Chopra, McGill University; Anthony Smith, General Motors Company LLC; Jorge Angeles, McGill University 2:30 p.m. 2013-01-2497 A Simplified Method to Make the Flux Table Considering Temperature Dependence of IPMSM Sang Min Kim, Taesuk Kwon, Hyeong Su Kim, Hyundai Mobis 3:00 p.m. 2013-01-2498 Error Propagation in Heavy Duty Gas Flow Measurement Adam Olsson, Erik Höckerdal, Ola Stenlåås, Scania CV AB The papers in this session are available in SAE Technical Paper Collection, COLL-TP-00371, and also individually. To purchase visit collections.sae.org Planned by General Powertrain Development / Powertrain Fuels and Lubricants Activity Monday, October 21 Combustion Control and Optimization Session Code: FFL303 Room 300 Session Time: 16:00 Organizers - Xiaojian Yang, Delphi Corporation; Guoming G. Zhu, Michigan State University Chairpersons - Sunyoup Lee, KIMM; Daniela Siano, Daniela Siano, Istituto Motori CNR Time Paper No. Title 4:00 p.m. 2013-01-2510 Knock Detection in a Turbocharged S.I. Engine Based on ARMA Technique and Chemical Kinetics Daniela Siano, Istituto Motori CNR; Fabio Bozza, Univ. Naples Federico II, Ist Motori CNR 4:30 p.m. 2013-01-2511 Multivariable Control of Residual-Affected HCCI Engines Based on Model Predictive Control Dinggen Li, Di Wang, Huazhong University of Science and Tech 5:00 p.m. 2013-01-2512 Effect of Stratification on Ion Distribution in HCCI Combustion Using 3D-CFD with Detailed Chemistry Yulin Chen, Liguang Li, Qiqi Miao, Yinbo Cao, Yintong Liu, Zhenyuan Liu, Jun Deng, Tongji Univ. 5:30 p.m. 2013-01-2513 Development of Real-Time Engine Control Using the In-Cylinder Pressure Signal in a Diesel Engine for Passenger Vehicle Seungeun Yu, Kyoungchan Han, Kihoon Nam, Dae Choi, Jun Yu, Hyundai- Kia R&D Center The papers in this session are available in SAE Technical Paper Collection, COLL-TP-00371, and also individually. To purchase visit collections.sae.org Planned by Control and Calibration Committee / Powertrain Fuels and Lubricants Activity Monday, October 21 Engine Boosting Systems Session Code: FFL501 Room 301A Session Time: 13:30 Organizers - William P Attard, MAHLE Powertrain LLC; Jaewoo Chung, KATECH Chairpersons - Dae Choi, Hyundai Motor Company; Ulrich Spicher, Mot GmbH; Ulrich Spicher, Karlsruhe Institute Of Technology Time Paper No. Title 1:30 p.m. 2013-01-2499 Characteristics of Turbocharger with TiAl Turbine Wheel in a Downsizing GDI Engine Jinyoung Jung, Heechang Oh, Choongsik Bae, Korea Advanced Inst. of Science & Tech. 2:00 p.m. 2013-01-2500 Influence of Engine Oil Properties on Soot Containing Deposit Formation in Turbocharger Compressor Norihiko Sumi, Satoshi Hirano, Kosuke Fujimoto, Takeshi Nakajima, Yosuke Kudo, Toyota Motor Corp.; Koki Ito, Idemitsu Kosan Co., Ltd. Planned by Lubricants and Powertrain Systems Committee / Powertrain Fuels and Lubricants Activity Monday, October 21 CI & SI Power Cylinder Systems Session Code: FFL502 Room 301A Session Time: 16:00 Organizers - Doyoung Chung, GM Korea Company; Dwight Doig, Cummins Inc.; Timothy P. Newcomb, BorgWarner Inc. Chairpersons - Doyoung Chung, GM Korea Company; Seong Soo Kim, Silla University Time Paper No. Title 4:00 p.m. 2013-01-2515 Analysis of Piston Friction in Internal Combustion Engine Ken-ichi Kohashi, Yuichiro Kimura, Motoichi Murakami, Toyota Motor Corporation; Yann Drouvin, Toyota Motorsport GmbH 4:30 p.m. 2013-01-2514 A Study for Fuel Economy Improvement on Applying New Technology for Torsional Vibration Reduction of Crank Pulley Kibong Yoon, Inje Oh, Jae Ik Ahn, Sangyun Kim, Young Chong Chung, Hyundai Motor Company 5:00 p.m. 2013-01-2516 Simulation of Restart Gradability of a Manual Transmission Vehicle Using AVL-CRUISE Sarvanu Gangopadhyay, Tata Motors Ltd. The papers in this session are available in SAE Technical Paper Collection, COLL-TP-00371, and also individually. To purchase visit collections.sae.org Planned by Lubricants and Powertrain Systems Committee / Powertrain Fuels and Lubricants Activity Monday, October 21 Emissions Measurement and Testing Session Code: FFL408 Room 301B Session Time: 13:30 Organizers - Jim Barker, Innospec; Paul Richards Chairpersons - Jim Barker, Innospec; Tae Joong Wang, Doosan Infracore Co., Ltd. Time Paper No. Title 1:30 p.m. 2013-01-2517 Fuel Effects Study with Small (<19kW) Spark-Ignited Off-Road Equipment Engines James N. Carroll, Southwest Research Institute; A. James Peterson, California Air Resources Board; Cheryl Caffrey, US Environmental Protection Agency 2:00 p.m. 2013-01-2520 Development of Driving Cycle for CO2 Emission Test of Heavy-Duty Vehicles Jinil Park, Ajou University; Jong-Hwa Lee, Ajou Motor College; Jongseop Lee, Ajou University 2:30 p.m. 2013-01-2518 Fuel Effects Study with In-Use Two-Stroke Motorcycles and All- Terrain-Vehicles James N. Carroll, Southwest Research Institute; Cheryl Caffrey, US Environmental Protection Agency; A. James Peterson, California Air Resources Board 3:00 p.m. 2013-01-2519 Multi-Wavelength Spectroscopic Investigations of the Post-Injection Strategy Effect on the Fuel Vapor within the Exhaust Line of a Light Duty Diesel Engine Fuelled with B5 and B30 Simona Silvia Merola, Stefano Iannuzzi, Luca Marchitto, Cinzia Tornatore, Gerardo Valentino, Istituto Motori CNR 2013-01-2521 A New Measurement Technique for Online Oil Dilution Measurement (Written Only -- No Oral Presentation) Christina Artmann, Marcel Kaspar, Hans-Peter Rabl, UAS Regensburg; Wolfgang Mayer, TU München 2013-01-2523 Investigations of Split Injection Strategies for the Improvement of Combustion and Soot Emissions Characteristics Based On the Two- Color Method in a Heavy-Duty Diesel Engine (Written Only -- No Oral Presentation) Xiaobei Cheng, Liang Chen, Fangqin Yan, Huazhong University of Sci. and Tech.; Guang Hong, University of Technology Sydney; Yong Yin, Huan Liu, Dongfeng Commercial Vehicle Ltd. The papers in this session are available in SAE Technical Paper Collection, COLL-TP-00371, and also individually. To purchase visit collections.sae.org Planned by Exhaust Aftertreatment and Emissions Committee / Powertrain Fuels and Lubricants Activity Monday, October 21 Exhaust Emission Control: SCR Session Code: FFL405 Room 301B Session Time: 16:00 This session is focused on system level of SCR in exhaust emission control. It includes emission regulation on SCR system, aftertreatment strategies for Euro 6, high speed video measurement of urea injector spray, and quasi 2-d model study of urea SCR simulation. Organizers - Maruthi Devarakonda, General Electric Company; Cheon Yoon, Hannam University Chairpersons - Hong-Suk Kim, DAE GIL Industry; Cheon Seog Yoon, Cheon Seog Yoon, Hannam University Time Paper No. Title 4:00 p.m. 2013-01-2527 High Speed Video Measurements of a High Temperature Urea Injector Spray - Comparison of Spray Evolution in Water and AUS-32 Nic van Vuuren, Continental Automotive Systems USA 4:30 p.m. ORAL ONLY Upcoming Emission Regulations for Passenger Cars: Impact on SCR System Requirements and Developments Alexis Rosseel, INERGY Automotive Systems 5:00 p.m. 2013-01-2529 A Study on Urea SCR Simulation Using a Quasi 2-D Model in Diesel Engine Operation ORAL ONLY Hideya Kametaka, Niigata Power Systems Co., Ltd. 5:30 p.m. ORAL ONLY Aftertreatment Strategies to Meet Euro 6 Emission Legislation with a Non-EGR (High NOx) Engine Magnus Lewander, Haldor Topsoe A/S Planned by Exhaust Aftertreatment and Emissions Committee / Powertrain Fuels and Lubricants Activity Monday, October 21 Mixing-Controlled CI Combustion (Part 1 of 3) Session Code: FFL204 Room 307A Session Time: 13:30 Organizers - Yohan Chi; Simona Silvia Merola, Istituto Motori CNR; Paul C. Miles, Sandia National Laboratories; Timothy P. Newcomb, BorgWarner Inc. Chairpersons - Yohan Chi, Hyundai Motor Company; Paul C. Miles, Sandia National Laboratories Time Paper No. Title 1:30 p.m. 2013-01-2530 Increasing a Diesel Engine Power Output by Combustion System Optimization Yufeng Li, Zhongzhou Cai, Yaozong Li, Yunguang Li, Xiaoqin Zhang, China North Engine Research Institute 2:00 p.m. 2013-01-2538 Optimization of Diesel Combustion System for Reducing PM to Meet Tier4-Final Emission Regulation without Diesel Particulate Filter Dockoon Yoo, Duksang Kim, Wook Jung, Nagin Kim, Dongin Lee, Doosan Infracore 2:30 p.m. 2013-01-2534 Size Distribution and Structure of Wall-Deposited Soot Particles in an Automotive-Size Diesel Engine Renlin Zhang, Kevin Szeto, Sanghoon Kook, The University of New South Wales 2013-01-2541 Emission Reduction Potential by Means of High Boost and Injection Pressure at Low- and Mid-Load for a Common Rail Diesel Engine under High EGR Rates (Written Only -- No Oral Presentation) Tobias Braun, Hans-Peter Rabl, UAS Regensburg; Wolfgang Mayer, TU München The papers in this session are available in SAE Technical Paper Collection, COLL-TP-00371, and also individually. To purchase visit collections.sae.org Planned by Engine Combustion / Powertrain Fuels and Lubricants Activity Monday, October 21 Mixing-Controlled CI Combustion (Part 2 of 3) Session Code: FFL204 Room 307A Session Time: 16:00 Organizers - Yohan Chi; Simona Silvia Merola, Istituto Motori CNR; Paul C. Miles, Sandia National Laboratories; Timothy P. Newcomb, BorgWarner Inc. Chairpersons - Seungmook Oh, KIMM; Simona Silvia Merola, Istituto Motori CNR Time Paper No. Title 4:00 p.m. 2013-01-2537 LES Analysis of Fuel/Air Mixing and Heat Release Processes in a Diesel Spray Hirokazu Kojima, National Institute of AIST; Hiroshi Kawanabe, Takuji Ishiyama, Kyoto Univ; Hirohide Furutani, National Institute of AIST 4:30 p.m.