D5 Track-Type Tractor Technical Specifications Configurations and features may vary by region. Please consult your Cat® dealer for availability in your area. Table of Contents D5 Track-Type Tractor Specifications .....................................3 D5 SU . 8 Engine . 3 Blade . 8 Air Conditioning System . 3 D5 Super LGP . 9 Fluid/Refill Capacities . 3 Blade . 9 Transmission . 3 D5 Fine Grading Arrangement . 10 Drawbar Pull . 4 D5 Super LGP . 10 Hydraulic Controls – Pressures . 4 Track Shoes . 11 Hydraulic Controls – Pump . 4 Dimensions – Rear Attachments . 12 D5 VPAT . 5 Ripper . 12 Blades . 5 Winch . 13 D5 LGP VPAT . 6 Standards . 14 Blades . 6 Sustainability – Sound and Vibration Levels . 14 D5 VPAT Fine Grading . 7 Advanced Cabin Filtration . 14 Blades . 7 Technology Features . 15 Standard and Optional Equipment ..................16 (continued on next page) D5 Track-Type Tractor Specifications Table of Contents (continued) D5 Track Type Tractor – Waste Handler Key Features and Benefits .........................19 D5 Waste Handler – SU . 24 Specifications ....................................20 Blade . 24 D5 Waste Handler Features . 25 Engine . 20 Track Shoes . 26 Air Conditioning System . 20 Dimensions – Rear Attachments . 26 Fluid/Refill Capacities . 20 Ripper . 26 Transmission . 20 Winch . 27 Drawbar Pull . 21 Standards . 28 Hydraulic Controls – Pressures . 21 Sustainability – Sound and Vibration Levels . 28 Hydraulic Controls – Pump . 21 Advanced Cabin Filtration . 28 D5 Waste Handler – LGP VPAT . 22 Technology Features . 29 Blade . 22 Standard and Optional Equipment ..................30 D5 Waste Handler – VPAT . 23 Blade . 23 D5 Track-Type Tractor – Heavy Duty/Forestry Key Features and Benefits .........................33 D5 SU – Heavy Duty/Forestry . 37 Specifications ....................................34 Blade . 37 D5 Heavy Duty/Forestry Features . 38 Engine . 34 Track Shoes . 39 Air Conditioning System . 34 Dimensions – Rear Attachments . 40 Fluid/Refill Capacities . 34 Ripper . 40 Transmission . 34 Winch . 41 Drawbar Pull . 35 Standards . 42 Hydraulic Controls – Pressures . 35 Sustainability – Sound and Vibration Levels . 42 Hydraulic Controls – Pump . 35 Advanced Cabin Filtration . 42 D5 VPAT – Heavy Duty/Forestry . 36 Technology Features . 43 Blade . 36 Standard and Optional Equipment ..................44 D5 Track-Type Tractor – Fire Suppression Dozer Key Features and Benefits .........................47 D5 VPAT – Fire Suppression . 51 Specifications ....................................48 Blade . 52 D5 Fire Suppression Dozer Features . 53 Engine . 48 Track Shoes . 54 Air Conditioning System . 48 Dimensions – Rear Attachments . 55 Fluid/Refill Capacities . 48 Ripper . 55 Transmission . 48 Winch . 56 Drawbar Pull . 49 Standards . 57 Hydraulic Controls – Pressures . 49 Sustainability – Sound and Vibration Levels . 57 Hydraulic Controls – Pump . 49 Advanced Cabin Filtration . 57 D5 LGP VPAT – Fire Suppression . 50 Technology Features . 58 Blade . 50 Standard and Optional Equipment ..................59 2 D5 Track-Type Tractor Specifications Engine Air Conditioning System Engine Model Cat® C7.1 The air conditioning system on this machine contains the Emissions U.S. EPA Tier 4 Final/ fluorinated greenhouse gas refrigerant R134a (Global Warming EU Stage V/Japan 2014/ Potential = 1430). The system contains 1.36 kg of refrigerant which Korea Tier 4 Final has a CO2 equivalent of 1.946 metric tonnes. Build Number 17B Fluid/Refill Capacities Power Train Fully automatic 3-speed Net Power (1,770 rpm) Fuel Tank 315 L 83.2 gal ISO 9249/SAE J1349 127 kW 170 hp DEF Tank 16 L 4.2 gal ISO 9249/SAE J1349 (DIN) 172 mhp Cooling System 41 L 10.8 gal Engine Power – Maximum (1,600 rpm) Engine Crankcase 18 L 4.8 gal ISO 14396 148 kW 198 hp Power Train 160 L 42.3 gal ISO 14396 (DIN) 201 mhp Roller Frames Standard/LGP (each) 18/27 L 4.8/7.1 gal Gross Power – Maximum (1,600 rpm) Final Drives (each) 8 L 2.1 gal SAE J1995 151 kW 202 hp Hydraulic System 80 L 21.1 gal Bore 105 mm 4.1 in Stroke 135 mm 5.3 in Transmission Displacement 7.1 L 433 in3 0.5 Forward 2.5 km/h (2.4 km/h) 1.6 mph (1.5 mph) • Net power advertised is the power available at the engine flywheel 1.0 Forward 3.3 km/h (3.0 km/h) 2.1 mph (1.9 mph) when the engine is equipped with a fan, air cleaner, clean emissions 1.5 Forward 4.4 km/h 2.7 mph module and alternator. 2.0 Forward 5.8 km/h 3.6 mph • Advertised power is tested per the specified standard in effect at the time of manufacture. 2.5 Forward 7.5 km/h 4.7 mph • No derating required up to 3000 m (9,840 ft) altitude, beyond 3.0 Forward 9.8 km/h 6.1 mph 3000 m (9,840 ft) automatic derating occurs. 0.5 Reverse 3.1 km/h (2.9 km/h) 1.9 mph (1.8 mph) • All non-road Tier 4 Interim and Final, Stage IIIB, IV and V, 1.0 Reverse 4.1 km/h (3.5 km/h) 2.5 mph (2.2 mph) Japan 2014 (Tier 4 Final) and Korea Tier 4 Final diesel engines are required to use only ultra-low sulfur diesel (ULSD) fuels 1.5 Reverse 5.4 km/h 3.4 mph containing 15 ppm (mg/kg) sulfur or less. Biodiesel blends up to B20 2.0 Reverse 7.1 km/h 4.4 mph (20% blend by volume) are acceptable when blended with 15 ppm 2.5 Reverse 9.5 km/h 5.9 mph (mg/kg) sulfur or less ULSD. B20 should meet ASTM D7467 3.0 Reverse 12.2 km/h 7.6 mph specification (biodiesel blend stock should meet Cat biodiesel Maximum Drawbar Pull spec, ASTM D6751 or EN 14214). Cat DEO-ULS™ or oils that meet the Cat ECF-3, API CJ-4, and ACEA E9 specification are 1.0 Forward 320 kN 71,939 lbf required. Consult your OMM for further machine specific fuel 2.0 Forward 198 kN 44,512 lbf recommendations. 3.0 Forward 113 kN 25,403 lbf • Diesel Exhaust Fluid (DEF) used in Cat Selective Catalytic Reduction (SCR) systems must meet the requirements outlined NOTE: Data between brackets are values for EU. in the International Organization for Standardization (ISO) standard 22241. 3 D5 Track-Type Tractor Specifications Drawbar Pull Hydraulic Controls – Pressures lb × kg × Maximum Implement 25 000 kPa 3,626 psi 100 100 D5 Drawbar Pull Operating Pressure 350 Maximum Steering 45 000 kPa 6,527 psi 70 Operating Pressure 300 60 Hydraulic Controls – Pump 250 50 Pump Output 200 Implement 127 L/min 33.5 gal/min bar Pull 40 Steering 165 L/min 43.5 gal/min aw 150 30 Fan 49 L/min 12.9 gal/min Dr Lift Cylinder Flow 127 L/min 33.5 gal/min 100 20 Tilt Cylinder Flow 127 L/min 33.5 gal/min 10 50 Ripper Cylinder Flow 127 L/min 33.5 gal/min Angle Cylinder Flow – VPAT 127 L/min 33.5 gal/min 0 0 0246810 km/h 01 23456 mph Speed 4 D5 Track-Type Tractor Specifications D5 VPAT Operating Weight* 17 180 kg 37,875 lb Shipping Weight** 16 950 kg 37,368 lb Ground Pressure (ISO 16754) 47.6 kPa 6.9 psi 5 Undercarriage (Standard) 40 Section/ 7 Bottom Rollers 8 1 Track Gauge 1890 mm 74.4 in 11 2 Width of Track Shoe (Standard) 610 mm 24 in 3 Width of Tractor 2500 mm 98.4 in 4 Length of Track on Ground 2562 mm 100.9 in Ground Contact Area (ISO 16754) 3.5 m2 5,469 in2 Grouser Height (Moderate Service) 57 mm 2.2 in Ground Clearance 358 mm 14.1 in 5 Machine Height*** 3085 mm 121.5 in 6 Length of Basic Tractor**** 4644 mm 182.8 in 10 All dimensions above with Cat Abrasion undercarriage with Extreme Service shoes of maximum 9 width for configuration, VPAT blade, and calculated per ISO 16754 unless otherwise specified . 4 6 * Operating weight includes blade, lubricants, coolant, full fuel tank, ROPS/FOPS cab, drawbar, and 75 kg (165 lb) operator . ** Shipping weight includes blade lift cylinders, C-frame, lubricants, coolant, 10% fuel, ROPS/FOPS cab, and drawbar . 2 *** Machine height from tip of grouser to top of Product Link™ Antenna . For sweeps, add 64 mm (2 .5 in) to overall machine height . For forestry sweeps, add 81 mm (3 .2 in) . With Extreme Service, add 9 mm (0 .4 in) . When Cat Grade with 3D antennas are installed there is no added machine height . 7 **** Length of Basic Tractor from the back of the drawbar to front of C-frame . 1 3 12 LGP VPAT Model Shown Blades Configuration VPAT VPAT – Foldable Capacity (ISO 9246) 3.5 m3 4.6 yd3 3.5 m3 4.6 yd3 7 Width across End Bits 3272 mm 10.7 ft 3272 mm 10.7 ft Width without End Bits 3159 mm 10.4 ft 3159 mm 10.4 ft Width across End Bits (Blade Angled 24°) 2998 mm 118.0 in 2558 mm 100.7 in Width without End Bits (Blade Angled 24°) 2908 mm 114.5 in 2539 mm 97.0 in Maximum Blade Angle 24° 24° 8 Height 1261 mm 49.6 in 1261 mm 49.6 in 9 Dig Depth 559 mm 22.0 in 559 mm 22.0 in 10 Lift Height 971 mm 38.2 in 971 mm 38.2 in 11 Maximum Tilt at Blade Corner 257 mm 10.1 in 257 mm 10.1 in Maximum Tilt Angle 8.5° 8.5° Pitch Adjustment 60° (cutting edge/ground, 60° (cutting edge/ground, nominal); –2°/+4° nominal); –2°/+4° 12 Length of Machine (Blade Straight) 5000 mm 197 in 5016 mm 197 in Length of Machine (Blade Angled 24°, without fuel tank guard) 5621 mm 221 in 5621 mm 221 in Blade Weight 1090 kg 2,403 lb 1286 kg 2,835 lb 5 D5 Track-Type Tractor Specifications D5 LGP VPAT Operating Weight* 19 170 kg 42,263 lb Shipping Weight** 18 940 kg 41,756 lb Ground Pressure (ISO 16754) 32.6 kPa 4.7 psi 5 Undercarriage (Standard) 46 Section/ 8 Bottom Rollers 8 1 Track Gauge 2160 mm 85.0 in 11 2 Width of Track Shoe (Standard) 840 mm 33 in 3 Width of Tractor 3000 mm 118.1 in 4 Length of Track on Ground 3116 mm 122.7 in Ground Contact Area (ISO 16754) 5.8 m2 8,995 in2 Grouser Height (Moderate Service) 57 mm 2.2 in Ground Clearance 473 mm 18.6 in 5 Machine Height*** 3200 mm 126.0 in 6 Length of Basic Tractor**** 5012 mm 197.3 in 10 All dimensions above with Cat Abrasion undercarriage with Extreme Service shoes of maximum 9 width for configuration, VPAT blade, and calculated per ISO 16754 unless otherwise specified .