NOVELTIES 2021 Photo: Hannes Auer TRADITION AND PASSION www.fleischmann.de | N FLEISCHMANN PHOTO COMPETITION PLACE 2 PLACE 3 PLACE Photo: Photo: Rainer Wahl 2 www.fleischmann.de 1 2 3 PLATZ PLATZ PLATZ 1st place N | Dear FLEISCHMANN fans, in spite of an unusual model railway year, we hereby present to you our ideas for the year 2021 in this catalogue! At the same time, we would like to thank you for your loyalty and your enjoy- ment of our N-gauge models! Content: With the completely new design of the striking double diesel locomotive class V188, we are Steam locomotives 6-13 fulfilling a number of customer request for this massive locomotive. As usual from our current Electric locomotives 14-41 new designs, the implementation of the model naturally corresponds to today's standards. Diesel locomotives 42-55 Start sets 56-58 For friends of electric traction, the completely new designs of the SNCF BB 7200 as well as the Passenger coaches 60-71 Dutch series 1600/1700/18000 will appear. In addition to their contemporary technical equipment with a Next18 interface, these models stand out due to their authentic engravings and delicate Tank wagons 72-75 pantographs. Sliding wall wagon 76-79 Goods wagons 80-99 And there is plenty going on in the wagon sector, too! This year, the newly-designed UIC coa- Combinated transport 94-99 ches will finally roll into the shops of specialist dealers. We have also closed a gap in our range with the revision of the EW-IV-coaches and the completely new design of the EW-IV- FLEISCHMANN photo competition 2, 59, 104 dining coach. As far as freight wagons are concerned, the Type Uahs/Zas tank wagon has Train combinations 100-101 been developed as a finely-designed reproduction of this widely-used wagon. The Gbs 1500 covered goods wagon has also been entirely newly developed to roll on N-gauge-tracks, closely Where do i find what? 102-103 pursued by the modern Hbbillns sliding-wall wagon. Notes 105 Imprint 106 We hope to have provided you with everything you wished for! We would also like to thank you for the numerous entries into our photo competition. You will find the winning photos presented Explanations 107 in the catalogue! We wish you lots of enjoyment with our 2021 innovations! Your FLEISCHMANN Team 3 | TRADITION AND PASSION “Tradition and passion” has been a FLEISCHMANN‘s maxim for over 130 mechanical aspects, ensuring limitless fun for many years to come. One reasonyears for. Our this model is the railwayhigh level products of suitability are characterised for everyday byuse top of allquality models in boththat provevisual their and longevity and robustness even under tough conditions on huge public model railway layouts. ZUBEHÖR DASS NICHT NUR EISENBAHNER BEGEISTERT N | HO ACCESSORIES CREATE YOUR PERFECT MODEL RAILWAY EXPERIENCE Accessories catalog The FLEISCHMANN program leaves hardly anything to be desired for railway fans. Whether an Epoch I steam engine, a diesel engine from the classic Epoch IV or a modern vehicle such as the Vectron or the ICE, FLEISCHMANN can offer you everything you want. And yet a reliable supply of spare parts, accessories, ZUBEHÖRtracks and ultra-modern control technology such as the Z21 system are also UNVERZICHTBAR FÜR contributingJEDEN EISENBAHNER factors towards unclouded play enjoyment. The FLEISCHMANN | N TRACK SETS WITH BALLAST BED N | TRADITION AND PASSION accessories catalogue provides an overview of this wide range of products. www.fl eischmann.de Points Points with current-conducting frog Three-way point and crossings 9 www. eischmann.de 9136 9136 9102 9102 Art. Nr.: 9170 Art. Nr.: 9178 Left hand standard point for manual operation, 9101 9103 9157 9101 Left hand standard point for manual operation, Art. Nr.: 9157 9101 9103 9157 9101 with current-conducting frog, length 111 mm Three-way point for manual operation, length: 111 mm Three-way point: 9102 length 111 mm 9170/78 91039102 9100 9170/78 9103 9100 Art. Nr.: 9171 Right hand standard point for manual operation, Art. Nr.: 9179 Right hand standard point for manual operation, length 111 mm with current-conducting frog, length 111 mm Crossover track 30°, length: 115 mm 9101 9171/79 9101 9170/78 Art. Nr.: 9161 Crossover track: 9101 9171/79 9101 9170/78 (= 2 x „diagonal track“ 9102). 9161 Fitted with guard-rails and frogs. 9161 9101 9184 9101 9171/79 The two routes are insulated from one another. 9101 9184 9101 9171/79 Art. Nr.: 9174 Left hand curved point for manual operation Art. Nr.: 9168 Left hand curved point for manual operation, 9136 with current-conducting frog 9136 Art. Nr.: 9162 Crossover track 15°, left hand crossing, length: 111 mm Double slip: 9171/79 9101 9100 N | Art. Nr.: 9175 Art. Nr.: 9169 Right hand curved point for manual operation, 9171/79 9101 9100 Right hand curved point for manual operation 9101 9185 9114 9101 9101 9185 9114 9101 with current-conducting frog 91 9136 9101 Art. Nr.: 9163 9136 Crossover track 15°, right hand crossing, length: 111 mm 9101 The current-conducting frog Straight points (standard and three-way points, double slips): 9162 / 9163: Length 111 mm (standard length), branch-off angle 15°, branch-off radius 430 mm. On several points, the current-conducting frog ensures good electrical contact The two tracks which cross over each other are electrically separated, Ponit accessories | The branch-off tracks correspond to track 9136 (15°). when running through frog area of the points. so that two different track circuits can cross. Electromagnetic universal point motor with end-off The track 9136 serves as opposite curve and leads to the parallel track distance These points cannot be „slipped“ through whilst set in the wrong direction, other- Art. Nr.: 640000 of 33.6 mm. wise this can cause a short circuit. Therefore, the points must always be set in the switching*. For all points. right direction. Prepared to accept the clip-in illuminated point lantern Art. Nr.: 9184 Double slip for manual operation, 15°, left hand crossing, The polarisation of the frog, in other words, the changing from „positive“ to 944001. 9101 9170/78 9101 9171/79 9101 length: 111 mm This point motor can be either plugged onto the railway 33.6 mm „negative“, which is essential as the points are set, is carried out automatically 9170/78 9101 9100 9171/79 when setting the point. layout board or underneath the railway layout board. For this purpose, a slot is cut into the railway layout Art. Nr.: 9185 Double slip for manual operation, 15°, right hand crossing, where the point motor comes to rest. 9136 9171/79 9103 9101 9102 length: 111 mm 9102 As delivered, all points are so-called live points, * The universal point motor 640000 replaces the items TRACK SETS WITH BALLAST BED 9170/78 9101 9100 9171/79 i.e. all track exits conduct electricity and can be Point set to ”straight on“ 942101 and 942201. | N run over by any powered vehicle. N | 9184 / 9185: All points are adaptable with electric point motors. If the two wire bridge clips are taken out of the 9101 9171/79 9100 9101 As delivered, all track exits deliver power into one circuit. By removing 9170/78 point, then the current only fl ows in the track exit the wire bridge clips the crossing tracks become electrically isolated from 9135 for which the point is set. Foto: FLM-Archiv Art. Nr.: 919001 Art. Nr.: 919003 Art. Nr.: 919004 Art. Nr.: 919083 DCC digital 9 Art. Nr.: 919084 DCC digital each other. Art. Nr.: 944001 136 Point set to ”branch-off“ This makes it possible to store trains without On the „crossover“ setting, another track circuit can be traversed. Illuminated point lantern signal for N tracks with ballast bed. power, without any additional wiring. For example, On the „branch-off“ setting, the current is separated at the centre of the Clip onto the point motor 640000. a fast express can pass a stored goods train on points. Connecting pieces to the point motor are included. Set A1 Set Ü1 Set Ü2 All points are adaptable with electric pointDigital motors. set Ü1 a parallel track.Digital set Ü2 32 33 www.fl eischmann.de Contents: 1 straight track 9100, 1 straight track 9101, Contents: 2 straight track 9100, 2 curved track 9136 TRACK SYSTEMS 1 right hand point 9171, 1 buffer stop 9116 (opposite curve for points), 1 right hand point 9171 Teil 02_2019 FLM_EN_Zubehoerkat S.21-48.indd 32 21.08.19 12:27 Teil 02_2019 FLM_EN_Zubehoerkat S.21-48.indd 33 21.08.19 12:27 Foto: FLM-Archiv Art. Nr.: 919002 Contents: 3 straight tracks 9100, 3 straight tracks 9101, DCC Digital Track Set Ü1: DCC Digital Track Set Ü2: 2 curved tracks 9136 (opposite curve for points), Contents: Contents: 2 manual uncoupler tracks 9114, 2 straight tracks 9100, 3 straight tracks 9100, N Set BÜ 1 left hand point 9170, 1 right hand point 9171 2 curved tracks 9136 (opposite curve for points), 3 straight tracks 9101, 1 right hand point 9171, 2 curved tracks 9136 (opposite curve for points), 2 electric point motors, 2 uncoupler tracks with electric motor 9112, 22 23 1 x 9414 (clip-on electric motor for manual uncoupler 1 x 9414 (clip-on electric motor for manual uncoupler www.fl eischmann.de track 9114), track 9114), 1x 8-fold turnout decoder DCC 10775, 1 left hand point 9170, 1 right hand point 9171, 1x 3-pole cable 10623, 3 electric point motors Teil 02_2019 FLM_EN_Zubehoerkat S.21-48.indd 22 21.08.19 12:26 Teil 02_2019 FLM_EN_Zubehoerkat S.21-48.indd 23 21.08.19 12:26 Contents: 1 straight track 9101, 2 straight tracks 9104, 1 level crossing 9198 3x 3-pole connector 10603 1x 8-fold turnout decoder DCC 10775, 1x 3-pole cable 10623, 6x 3-pole connector 10603 9101 9100 9100 9101 9100