Basic Vortex Mixer 88882011 & 88882012 In the United States: In Canada: For customer service, call 1-800-766-7000 For customer service, call 1-800-234-7437 To fax an order, use 1-800-926-1166 To fax an order, use 1-800-463-2996 To order online: thermofisher.com To order online: thermofisher.ca Operating Manual Revision A . 04 01 2021 Find out more at thermofisher.com ©2021 Thermo Fisher Scientific Inc. All rights reserved. All trademarks are the property of Thermo Fisher Scientific and its subsidiaries unless otherwise specified. Contents Section 1 Important Information 1 Disposing of Product 2 Section 2 Introduction 3 Feature 3 Section 3 Inspection and Installation 4 Packing List 4 Connections 4 Structure Diagram 4 Section 4 Overview 5 Specifications 5 Environmental Conditions 5 Safety Instructions 6 Section 5 Operation 7 Control Panel 7 Installation of Accessories 8 Settings 10 Section 6 Safety Tips and Maintenance 11 Section 7 Troubleshooting 13 Section 8 Optional Accessories 14 Section 9 Warranty 15 Section 10 Compliance 16 Section 1 Important Information Ignoring the following warnings could operating and request the service. the main power immediately and request cause serious injuries or even fatal the service if water may be in the product. accidents. Keep out of the direct sunlight. It may influence product life and proper Do not let the product take any strong Check the voltage, phase and capacity of operation. shock or vibration. It could cause power supply on the ID plate before abnormal operation or trouble. It may installation. Connect properly. Do not use the machine at places where deteriorate the ability of the product moisture is high and flooding can operation and not obtain correct results. Power supply must be properly happen. grounded. Abnormal grounded Do not sprinkle insecticide or flammable connection causes serious damage. Do not assemble, repair, modify on your spray on the product. Use smooth Grounded connection must not be on the own, this product may not work well and cloths. Cleaning with solvent can cause water pipe and gas pipe. electrical shock may possible. fire and deformity. Use provided power cord. Power cord: Changes to the product could result in Power off while product cleaning. It may Wall outlet with grounded terminal product inefficiency. Also this will void cause electric shock or fire. power cord 250V 10A. warranty. Which also indicates a hazardous situation, if not avoided may Do not drop or allow the machine to fall. Do not install the product in a place that result in minor or moderate injury. It will cause wrong operation and gas could leak. Do not use in a place that malfunction. has industrial oil smoke or metallic dust. Do not put heavy things on the power cord. It causes fire or electric shock. Do not Do not put the machine on the cord. It Only accessories that meet the use the machine near to places where may take off the wire coating and cause manufacturer's specifications shall be explosion could happen due to organic electric shock or fire. used. evaporating gases. Do not touch it with wet hands and place the main plug correctly. It could cause Explosive materials: acid, esther, nitro Disposing of Product compound. the electric shock or injuries. Installing power outlet near instrument Dispose of the unit by separating the Inflammable materials: salt peroxides, plastic, motor and electronics and inorganic peroxide, salt acids. may be convenient. Allow adequate spacing around the product to ensure proper dispose according to local laws and Check equipment for permissible ventilation, accessibility to the power regulations. environmental conditions when using switch and for allowing the instrument to inside of Temperature and Humidity run without impediment. Chamber or Incubator. It can be the cause of fire or trouble by stirrer Do not install the Vortex Mixer near electricity, electronic, and damage of machinery generating high frequency noise. motor. Avoid installation close to high frequency- welding machine, sewing machine, or Mixer's permissible environmental mass SCR controller. condition. Temperature 5°C to 40°C, Maximum relative humidity 85%. Do not inject any liquid and inflammable things inside of product. Unplug if there is a strange sound, smell and/or smoke from the product. Stop Do not pour water or put liquid on the top of the product when cleaning. Disconnect 1 Section 1 | Important Information Basic Vortex Mixer 2 Section 2 Introduction Section 3 Inspection and Installation Welcome to use Thermo Scientific Vortex 2.1 Feature Before unpacking the unit, first check for After unpacking, check that all unit parts Mixers. Vortex mixers are used in biomedical It can be easily switched between touch damages in the package of the unit. and accessories are as listed below. engineering, physical and chemical analysis, and continuous modes and the Contact us or the agent from which you Then unpack the unit. Check carefully to purchased the unit if any components environmental monitoring, food, hygiene, corresponding light is on when working see if there were damages incurred were omitted. petrochemical, metallurgy and other fields, normally. during transit. for cell culture, sample tissue, chemical ◆It has speed adjustment display reagents, bacteria liquid and other substances function. mixed. It is suitable for test tubes, centrifugal 3.1 Packing List ◆It uses a knob to achieve stepless tubes, color tubes, enzyme plates, deep speed regulation. Description Catalog Number Figure hole plates, PCR plates and other containers. ◆It has a high sensitivity touch switch. ◆A variety of accessories can be Basic This product is intended to be used in a Vortex Mixer 88882011 88882012 laboratory setting and is not to be used selected to maximize the needs of in a clinical setting. customers. ◆It uses brushless DC motor, with accurate speed control, stability, safe Rubber Platform 1 1 and reliable features. ◆DC motor design is suitable for long- Power Adapter 1 N/A time operation, up to 1 week or longer. 120V ◆It has a power recovery function. Multi-Power ◆The housing material is ABS, which N/A 1 Adapter 220V has excellent heat resistance, corrosion resistance, impact resistance and chemical resistance. 3.2 Connections 3.3 Structure Diagram Rubber Platform Control Panel Knob Foot(8) Power Housing Power Switch Adapter 3 Section 2 | Introduction Basic Vortex Mixer 4 Section 4 Overview 4.1 Specifications 4.3 Safety Instructions Rotation Speed Speed Range......................................................200 to 3000rpm Please read the entire instruction manual Speed Accuracy.......................................................................±5% before operating the Basic Digital Vortex. ￠ Orbit Diameter.................................................................... 4mm Operating Mode............................................Touch /Continuous WARNING DO NOT use the Basic Drive Motor.............................................................Brushless DC motor Vortex Mixer in a hazardous (Suitable for long-time operation) atmosphere or with hazardous materials for which the unit was Load Maximum Load……………………………………............0.5kg @ 800rpm not designed. Also, the user should be aware that the protection provided Size Overall Dimensions........................................205×151×131mm by the equipment may be impaired Platform Diameter...........................................................￠76mm if accessories used are no provided Packing Dimensions......................................290×270×240mm or recommended by the manufacturer, or are used in a manner not specified Weight Net Weight.............................................................6.5Kg(14.33lb) by the manufacturer. Gross Weight........................................................6.8Kg(14.99lb) CAUTION ! To avoid electrical shock, completely cut off power to the unit Power Supply Input Requirement......................100-240VAC~, 50/60Hz, 6W by disconnecting the power cord from Output Requirement.....................................................24V ,1A the unit or unplug from the wall outlet. Disconnect unit from the power Others Certification..............................RoHS, WEEE, cCSAus, CE Mark supply prior to maintenance and IP Class.....................................................................................IP32 service. Any spills should be removed promptly. Bio hazard spills should be cleaned using approved liquid 4.2 Environmental Conditions promptly. Solvent spills are a fire hazard. Stop the unit immediately, Application Environmental Conditions: indoor use and DO NOT operate until clean up Temperature....................................................................5 to 40℃ is complete and vapors have dissipated. Altitude...........................................................................≤2,000 m DO NOT immerse the unit for cleaning. Humidity...................................................................... 20% to 85% DO NOT operate the unit if it shows signs of electrical or mechanical Storage Environmental Conditions damage. Temperature....................................................................0 to 60℃ Altitude...........................................................................≤2,000 m Humidity.......................................20% to 90%, non-condensing 5 Section 4 | Overview Basic Vortex Mixer 6 Section 5 Operation This chapter covers the control panel and its operation. 5.2 Installation of Accessories Vessel Platform 5.1 Control