26764.7 L.P. GAS CYLINDER INSTALLATION INSTRUCTIONS FORD FALCON UTILITY –MID MOUNT AU - BF SERIES (TRAY & STYLE-SIDE) This Automotive LP Gas cylinder must be installed in the vehicle in strict accordance with the latest requirements of AS/NZS1425. Any modifications to the cylinder will render the warranty null and void. GENERAL CYLINDER SPECIFICATIONS: DIAMETERS : 360MM LENGTH: 830MM CAPACITY : 73L (Water) L.P GAS CAPACITY : 58L VALVE ORIENTATION : 30 degrees. Modifications: Exhaust relocation required. This cylinder is designed to be mounted underneath the vehicle in the current position of the exhaust muffler. 1. Remove the exhaust muffler and tail pipe 2. If the vehicle is a style-side utility, remove assembly to create space for the tank . the plastic tub. C:My documents\salesofficeandrew\Ford AU-BF Ute Revision 1 – 20/08/10. This is an Uncontrolled document. 3. The cylinder is designed to be mounted 4. If the vehicle contains a tray back, use the to the crossrails underneath the vehicle. cross rails shown for mounting. Jack the cylinder into position, ensuring the valves are facing outwards toward the driver-side and the brackets line up with the cross rails. Mark the hole locations and drill 11mm dia holes through the cross rail. 5. If the vehicle is style-side (tub) use a 6. Bolt the cylinder into position making hole saw to cut an opening in the top sure the cylinder and stoneguard is not large enough to fit the backing plates and touching the vehicle at any point. bolts into the cross rails. 6. Refit the exhaust in accordance with AS/NZ 1425. C:My documents\salesofficeandrew\Ford AU-BF Ute Revision 1 – 20/08/10. This is an Uncontrolled document. .