Manual.book Seite 1 Donnerstag, 3. Mai 2012 3:26 15 ES512.1 FlexRay Network Module User’s Guide Manual.book Seite 2 Donnerstag, 3. Mai 2012 3:26 15 Copyright The data in this document may not be altered or amended without special notification from ETAS GmbH. ETAS GmbH undertakes no further obligation in relation to this document. The software described in it can only be used if the customer is in possession of a general license agreement or single license. Using and copying is only allowed in concurrence with the specifications stipulated in the contract. Under no circumstances may any part of this document be copied, repro- duced, transmitted, stored in a retrieval system or translated into another language without the express written permission of ETAS GmbH. © Copyright 2009 ETAS GmbH, Stuttgart The names and designations used in this document are trademarks or brands belonging to the respective owners. TTN F 00K 106 587 R1.0.2 EN 2 Manual.book Seite 3 Donnerstag, 3. Mai 2012 3:26 15 Contents 1 General Information . 7 1.1 Basic Safety Instructions . 7 1.1.1 Correct Use . 7 1.1.2 Labeling of Safety Instructions . 7 1.1.3 Demands made re the Technical State of the Product . 7 1.2 RoHS conformity . 8 1.2.1 European Union . 8 1.2.2 China . 8 1.3 Taking the Product Back and Recycling . 8 1.4 About This Manual . 9 1.4.1 Structure . 9 1.4.2 Using this Manual. 10 1.5 Package Contents . 11 2 Hardware Description . 13 2.1 Modules of the ES51x Line . 13 2.2 ES512.1 Features . 13 2.3 Housing . 15 2.4 Serial Number . 15 2.5 Ports . 15 Contents 3 Manual.book Seite 4 Donnerstag, 3. Mai 2012 3:26 15 2.5.1 Front Panel. 15 2.5.2 Back Panel . 16 2.6 LEDs . 16 2.6.1 Overview . 16 2.6.2 LED Display. 17 3 Functional Description . 19 3.1 Block Diagram . 19 3.2 Power Supply (6-32V DC) . 19 3.3 Ethernet Switch . 19 3.3.1 “HOST” Port . 20 3.3.2 “ETH1”, “ETH2”, “ETH3” Port. 20 3.3.3 Power-Saving Feature . 21 3.4 FlexRay Interface ("FLEXRAY A", "FLEXRAY B") . 21 3.4.1 Feature. 21 3.4.2 Bus Termination Resistor. 21 3.5 Module Network . 22 3.6 Time Synchronization . 22 3.7 Firmware Update . 23 4 Getting Started. 25 4.1 Applications . 25 4.1.1 ES512.1 with XETK, ES590 and ES400 Modules . 25 4.1.2 ES510.1 with ES511 and ES512 Measure Modules . 26 4.2 Wiring . 27 4.2.1 “HOST” Port . 27 4.2.2 “6-32V” Port . 27 4.2.3 “ETH1”, “ETH2”, “ETH3” Port. 28 4.3 Configuring the ES512.1 . 30 4.3.1 Web Interface. 30 4.3.2 Launching the ES512.1 Web Interface . 30 4.3.3 Configuring the “Auto / On Switch” Function . 30 5 Technical Data . 31 5.1 General Data . 31 5.1.1 Fulfilled Standards and Norms . 31 5.1.2 Environmental Conditions . 31 5.1.3 Mechanical Data . 32 5.2 System Requirements . 32 5.2.1 Hardware . 32 5.2.2 Ethernet Interface of the PC . 32 4 Contents Manual.book Seite 5 Donnerstag, 3. Mai 2012 3:26 15 5.2.3 Supported Applications and Software Requirements. 32 5.3 Electrical Data . 33 5.3.1 Interface „HOST“ . 33 5.3.2 Power Supply . 33 5.3.3 Ethernet Interfaces . 33 5.3.4 FlexRay Interfaces ("FLEXRAY A" and "FLEXRAY B"). 35 5.4 Pin Assignment . 36 5.4.1 Interface „6-32V“ . 36 5.4.2 Interface „HOST“ . 37 5.4.3 Interface „ETH1“ . 37 5.4.4 Interface „ETH2“ . 38 5.4.5 Interface „ETH3“ . 38 5.4.6 Interface „FLEXRAY A“ . 39 5.4.7 Interface „FLEXRAY B“ . 39 6 Cable and Accessories . 41 6.1 Power Supply Cable . 41 6.2 Ethernet Cable . 42 6.2.1 CBE500-3 Cable. 42 6.2.2 CBE530-x Cable . 42 6.3 CAN-/ LIN-/ FlexRay Cable . 43 6.4 FlexRay Interface Terminating Resistor . 43 7 Ordering Informationen . 45 7.1 ES512.1 . 45 7.2 Accessoires . 45 7.2.1 Power Supply Cables . 45 7.2.2 Ethernet Cables . 45 7.2.3 CAN-/ LIN-/ FlexRay Cable . ..