Auto Tools BMW SPECIAL TOOLS Auto Tools BMW SPECIAL TOOLS No.130301 No.130606 No.130204 No.151803 No.151701 No.164202 BMW camshaft alignment tool( M52TU, M54, M56) BMW Secondary chain tensioner locking tools set(M62) BMW Camshaft alignment tool (M40 42 50 60 62 70 ) BMW valve pressure spring installer/ remover (N20/N55) BMW Fuel injector install& remove tool (N55) BMW N63 Timing tool Use with UN-130105 to fix on the camshaft BMW engine models M42 & M50: Includes For fixing the camshaft chain tensioner Special designed to remove and install the Special designed to install and remove the Timing chain Pre-Tensioning Preload tool for Special design for using before installing the 2 blocks swive lock plate & locking pin for s Applicable: BMW M60, M62(VANOS) pressure spring on intermediate lever injector in N55 engine BMW N63 timing tool accurate engine etting camshaft timing Applicable: BMW N20 ,N26, N55 BM number: 130270 Applicable: BMW engine models M52TU, Engine models M40 & M70: Includes plate & BM number: 117110 Applicable: BMW N55 engine Ean: 4048769031510 M54, M56 locking pin for setting camshaft timing BMW engine models M60&M62 : Includes 2 blocks swivel lock plate & locking pin for setting camshaft timing No.151702 No.151703 No.131207 No.151901 No.151902 No.164203 BMW Fuel injector install& remove tool (N20,N55) BMW fly wheel holder BMW fan clutch tool BMW VOLVO fuel tank lid remover BMW fuel tank lid remove tool BMW N63 Fuel injector tool Special designed to install and remove the Special designed to fix the flywheel when Remove lock nuts on thermo-viscous fans Special designed to remove fuel tank lid for Used to remove the fuel tank lid Fuel Injection Installer & Remover Tool injector in N20, and new N55 engine replacing timing chain found on Ford, BMW… many vehicles diesel and petrol cars Applicable: BMW and Mini cooper model: Applicable : BMW V8 N63 X6 Drive 550i Applicable: BMW N20, N55 It helps to release and tighten the central Length: 380mm Applicable: BMW: F01, F02, F10, F12, 1988-2011 E31 E34 E36 E38 E39 E46 E53 750i 760i Engines BM number: 130320 bolts on vibration damper Size: 32mm VOLVO T4, T5 engine, E60 E63 E64 E65 E83 E85 E90 R50 R52 Applicable: BMW M47T2/ M47TU/ M57T2 2010 later. R53 R55 R56 R57 /M57TU/M67/N45/N45T/N46/N46T/N51 BM number: 161020 /N52/N53/N54/W17 No.131208 No.151801 No.151802 No.131411 No.151905 No.164204 BMW fan clutch tool BMW valve pressure spring installer/ remover (N42/N46) BMW valve pressure spring installer/ remover (N51/N52/N55) BMW wiper linkage assembly socket bit (T80H) BMW oil cooler line plier BMW N53 N54 fuel injector tool Windshield wiper has to be removed first Release the hydraulic cooling lines that Allow the technician to hold the water pump Special designed to remove and install the Special designed to remove and install the Size: 1/2”DR.*T80H; Length: 78mm connect to the transmission Fuel injection installer & remover tool for BMW pulley in place pressure spring on intermediate lever pressure spring on intermediate lever Removal and install BMW wiper linkage Front clips fixed by screw could adjust the N53&N54 engines while loosening the radiator fan BM number: 119390 BM number: 114270 BMW engine models M10, M20,&M30 and assembly angle for use later cars Used in conjunction with UN-131109 Applicable : BMW E46 E53 E60 E61 E63 E64 Applicable: E12 E21 E23 E24 E28 E30 E31 E65 E66 7 E81 E83 E85 E86 E87 E90 E91 E92 E32 E34 E36 E38E39 E46 E52 E53 E60 E65 E93 R50 R52 R53..etc. E66 E67 E85 PR1..etc. Auto Tools BENZ SPECIAL TOOLS Auto Tools BMW SPECIAL TOOLS No.152003 No.130609 No.152102 No.131106 No.152204 No.131005 BMW 1/2”DR.*17mm BENZ wheel socket Benz camshaft alignment tool Benz AMG engine timing tool set Benz front lower control arm ball joint remover/ installer Benz BMW fan clutch tools set Benz camshaft pulley socket (T100H) Special designed socket to remove and install Contents: No.1 Fan belt service wrench ½” DR.*T100H Length:78mm Hold the camshaft in 40 degree TDC position Used to fix and align the camshaft in correct To remove and install front lower control arm No.2 L type fan clutch holder: the Mercedes wheel nut without get damaged Special designed for correcting the position (left/right side) timing angle when replacing the timing belt ball joint with the special C clampUsing on car No.3 Remove lock nuts on thermo-Viscous fans found Size: 1/2”DR. *17mm 6PT. on camshaft pulley Application: Benz M112, M113 Applicable: Benz M156 Applicable: Benz W220 W211 Length: 380mm size: 32mm Length:78mm No.4 65mm Mercedes Benz Slim shaft handles Applicable: Benz M271 M270 No.5 36mm Remove lock nuts on thermo- viscous fans found MM number:27158900 100009/wwCW tempered pressed steel No.6 BMW engine models M10, M20 & M30 and later cars. No.7 Special design with 3 holes to hold the stud on fan clutch assembly No.152103 No.130610 No.152105 No.131006 No.152401 A B C Benz engine timing tool set Benz alignment tool set (M271) Benz alignment tool set (M275) Benz ignition lock remover Benz injector remover (M271) Benz crankshaft pulley holder This retaining device is designed for Used to fix and align the camshaft in correct This retaining device makes it possible to positioning the camshaft in 30 degree TDC For removal and replacement of the ignition Special designed for removing the injector For removal and replacement of the crankshaft bolt timing angle when replacing the timing belt position the camshafts in the installed position position switch retaining ring fitted to Mercedes types by slide hammer or the T bar Applicable: Benz M270/M274 W129 W140 W202 W2110 W220 Retainer to draw in the timing chain . To retain Applicable: M275, M285: The set C only used Applicable: Benz M271 engine after 2007 No. 131209 applicable: Benz M271. MM number: A2710300003 timing chain with camshaft sprockets in mesh for left bank of cylinder and set A&B used for W203 W209 W211 W204 MM number: 271589023300 No. 131210 applicable: Benz M272/273 Applicable: Benz M271 No. 152404 applicable: Benz M112 M113 M137 M155 M156 right bank M275 M288 M137: Use the set A&B to loosen and tighten mounting screws for the camshaft sprocket and adjusting the timing No.152201 No.152304 No.152203 No.164603 No.131206 No.131312 Benz alignment tool set (M276) Benz dashboard service tool kit Benz bush remove/install tool set Benz, Chrysler, Jeep engine timing tool set Benz fan clutch tool (36mm) Benz fan clutch tool Special designed to align the camshaft timing Kit includes ignition lock remover, radio set A timing tool set which covers a large of models in the Removal and replacement tool for metallic 36mm Remove lock nuts on thermo- viscous Special design with 3 holes to hold the stud on angle for correct position remover and instrument cluster removing Mercedes range including petrol and diesel engines bushes on rear axles fans found on FORD, MERCEDES… fan clutch assembly found on Mercedes Benz Applicable: BENZ M157, M157, M276, M278 hooks Set includes flywheel plate locking tools and Applicable: Benz W140 W124 W201 W202 Many vehicles. Made from tempered pressed vehicles to allow release of lock nut. engine Suitable for most Mercedes Benz series camshaft locking pin set W129 W210 Also suitable for Chrysler PT Cruiser 2.2, CRD and steel Slim handle for tight space operation. MM number: 276589014000 Jeep Grand Cherokee 2.7CRD Auto Tools BENZ SPECIAL TOOLS Auto Tools VOLVO SPECIAL TOOLS No.152601 No.152602 No.152802 No.130205 No.152804 Benz engine fixing screws wrench Benz SPARK PLUG electric wire remover (V6) Benz BMW VOLVO fuel tank lid remover VOLVO timing tools set (T4,T5) VOLVO camshaft alignment tool(3.0/3.2/T6) VOLVO crankshaft pulley holding tool To adjust and fix angle of camshaft and Special angle design to remove the nuts from engine fixing Special angle design with 17mm wrench to be a Special designed to remove fuel tank lid for Specially designed to align the engine camshaft and crankshaft screw without block crankshaft. Specially designed to fix crankshaft pulley lever for removing and installing the wire easily diesel and petrol cars position, and correct into the side cover Use with 3/8”Dr. Wrench, go-through type. Applicable: VOLVO V41.6L, 2.0L T4 T5 when releasing /tightening central bolt Content: Applicable: Benz engine models V6 Applicable: Benz: W204, W207, W212 Applicable: VOLVO B6304/6324 engine/3.0, 3.2 (T6 engine) engine Applicable: VOLVO 5V 6V engine No. 131304 16mm 12 PT applicable: W220 W210 W203 BMW: F01, F02, F10, F12 S60 (2011~), S80(2006~) V60, V70(2007~), XC60, XC90(2007~) W219 W221 W211 W204 No. 131305 17mm 12P applicable: W140 W210 W202 W126 VOLVO T4 T5 engine, 2010 later W124 W201 W170 No.152603 No.130502 No.152901 No.152902 No.152903 VOLVO Strut nut socket VOLVO Joint separator Includes 1 piece of holding socket which has four knurled With 2 thread protective covers to prevent getting hurt of threads Points and 1 piece of double-D axel center socket. Thread insert: M14*1.5, M14*2.0 Benz fuel tank lid wrench(W164) Benz transmission dipstick Camshaft/crankshaft alignment tool VOLVO serpentine belt tool Application: VOLVO models S40, S60, S70, S80, S90 Jaws open: 30mm Applicable: VOLVO models No. 152504 Full length: 1220mm Applicable: VOLVO models 850, 960, S40,S70 and S90. V50 Specially designed to adjust the tension idler The tool is designed to remove the plastic fuel Applicable: transmission type 722.6 Engines: B6254GS, B6294T, B5234T4, B6294S2, B5244S6, 2, tank lid No.