Retention Time Table for Carbomix Phases

Retention Time Table for Carbomix Phases

Retention time Table for Carbomix Phases Compound Carbomix H-NP5 Carbomix H-NP10 Carbomix Ca-NP5 Carbomix Ca-NP10 Carbomix Pb-NP5 Carbomix Pb-NP10 8% 5% 8% 10% 8% 5% 8% 10% 8% 5% 8% Conditions: Acetic acid 13.58 17.52 14.64 13.39 / / / / / / / Carbomix H-NP10 Adonitol 9.85 13.59 11.10 10.26 13.40 16.76 14.73 13.67 18.81 21.88 19.88 Mobile phase:2.5 mM H2SO4 Arabinitol 10.06 13.82 11.30 10.41 15.99 19.80 17.72 16.06 23.63 27.76 24.95 Flow rate:0.6 mL/min D-(-)-Arabinose 9.77 13.46 10.93 10.08 12.13 13.77 13.43 12.52 14.81 17.74 15.76 Detector:RID L-(+)-Arabinose 9.77 13.45 10.93 10.08 12.13 15.45 13.41 12.53 14.82 17.74 15.76 : 1,4-Butanediol 19.52 23.11 / 19.26 14.41 17.81 15.96 14.48 15.98 17.77 16.49 Column Tem. 80℃ n-Butanol 34.23 35.93 / 32.66 24.17 / / / 28.37 28.28 27.91 Injection Volume:10 μL (3 injections) t-Butanol 23.19 / / / 15.11 / / / 15.96 17.80 16.60 sec-butyl alcohol 28.55 31.90 30.25 28.23 18.82 22.83 21.06 19.01 20.63 22.25 21.06 Carbomix H-NP5 D-(+)-Cellobiose 7.79 9.79 8.18 8.17 8.42 10.10 8.81 8.96 10.30 12.27 10.89 Mobile phase:2.5 mM H2SO4 Citric acid 8.09 10.26 8.69 8.35 / / / / / / / Flow rate:0.6 mL/min Erythriyol 10.74 14.70 11.94 11.00 14.15 17.34 15.98 14.47 18.67 21.34 19.60 Detector:RID Ethanol 20.24 23.13 21.82 20.72 15.48 18.30 16.38 15.89 16.32 17.69 16.79 Column Tem.: 55℃ Formic acid 12.59 16.11 13.51 12.48 / / / / / / / Injection Volume:10 μL (3 injections) D-Fructose 9.25 12.65 10.27 9.58 12.08 15.27 13.34 12.45 15.85 19.17 16.86 Fumaric acid 11.71 / 13.90 / / / / / / / / Carbomix Ca-NP10 Galactitol 9.51 13.13 10.66 9.87 18.22 22.57 19.44 18.05 30.81 36.54 32.57 : D-(+)-Galactose 9.13 12.54 10.15 9.48 10.73 13.77 11.77 11.20 13.54 16.50 14.52 Mobile phase H2O D-Glucose 8.76 11.90 9.68 9.16 9.82 12.37 10.61 10.32 11.97 14.31 12.74 Flow rate:0.6 mL/min Glycerol 12.19 16.07 13.61 12.46 14.96 17.89 16.20 15.12 18.34 20.59 19.13 Detector:RID IPA 21.94 25.79 23.89 22.53 15.37 18.61 17.16 15.88 16.27 17.86 16.78 Column Tem.: 85℃ Lactic acid 11.40 15.41 12.70 11.55 / / / / / / / Injection Volume:10 μL (3 injections) B-Lactose 7.93 10.24 8.42 8.29 8.70 10.81 9.25 9.22 10.92 13.51 11.70 D-Lyxose 9.50 13.08 10.64 9.87 12.65 16.05 13.96 13.02 15.35 18.33 16.33 Carbomix Ca-NP5 Maleic acid 8.42 9.50 8.53 8.56 / / / / / / / Mobile phase: H2O Malic acid 9.03 12.03 9.80 9.24 / / / / / / / Flow rate:0.6 mL/min Maltotetraose 7.42 / / / 7.78 / / / 9.40 12.11 10.31 Detector:RID Maltitol 8.04 10.51 8.41 8.29 10.77 14.74 11.92 11.24 16.69 22.68 18.44 Column Tem.: 85℃ D-(+)-Maltose 7.85 10.01 8.29 8.23 8.56 10.43 9.02 9.09 10.79 13.04 11.47 : Maltotriose 7.54 8.94 7.70 7.90 8.08 9.40 8.33 8.57 10.23 12.49 10.87 Injection Volume 10 μL (3 injections) D-Mannitol 9.40 12.99 10.53 9.79 15.54 19.57 17.34 15.60 23.24 28.05 24.89 D-(+)-Mannose 9.11 12.55 10.13 9.48 11.00 14.09 12.05 11.45 15.01 18.43 16.09 Carbomix Pb-NP10 D-(+)-Melezitose 7.55 / / / 7.99 9.14 8.18 8.49 9.43 11.23 10.00 Mobile phase: H2O Methanol 17.99 20.60 19.21 18.28 15.32 17.74 16.08 15.64 15.82 17.19 16.31 Flow rate:0.6 mL/min Oxalic acid : 7.61 7.72 7.44 7.72 / / / / / / / Detector RID dihydrate Column Tem.: 75℃ 1-Propanol 25.83 27.83 26.56 25.16 19.08 21.58 20.44 18.95 21.40 21.48 21.21 Injection Volume:10 μL (3 injections) 1,2-Propylene 15.43 / / / 16.23 / / / 19.68 20.88 20.10 glycol Carbomix Pb-NP5 Pyruvic acid 8.99 10.72 10.37 9.24 / / / / / / / : D-(-)-Ribose 9.95 13.73 11.16 10.25 19.37 24.21 20.70 19.23 29.79 35.80 31.07 Mobile phase H2O D-Sorbitol 9.49 13.12 10.64 9.86 18.92 23.74 20.22 18.71 32.87 39.86 34.96 Flow rate:0.6 mL/min Succinic acid 10.46 14.45 11.54 10.47 / / / / / / / Detector:RID D-(+)-Sucrose / / / / 8.49 10.31 8.93 9.03 10.34 12.38 10.97 Column Tem.:75℃ Tartartic 8.41 10.74 8.94 8.64 / / / / / / / Injection Volume:10 μL (3 injections) Triethylene glycol 14.42 19.60 16.12 14.17 17.51 20.01 17.51 17.21 35.95 34.98 34.53 Xylitol 10.21 14.03 11.47 10.53 18.79 23.17 21.08 18.66 30.06 35.71 31.75 D-Xylose 9.19 12.61 10.24 9.60 10.72 13.49 11.63 11.19 12.93 15.24 13.70 www.sepax-tech.com Toll Free: 1-877-SEPAX-US CC1027 Mixed polysaccharides Analysis on Carbomix Pb-NP5:8% ( 7815 ) Column: Carbomix Pb-NP5:8% ( 5 µm, 8%, 7.8 x 150 mm ) Mobile phase: Water, Flow rate: 0.6 mL/min, Detector: RI ( 35 ℃ ) Column temperature: 80 ℃, Injection volume: 10 µL Samples: Cellobiose + Glucose + Mannose ( 5.0 mg/mL ), Pressure: 10 bar nRIU 6.842 40000 6.056 8.223 30000 20000 10000 0 0 2 4 6 8 10 12 min Cellobiose Glucose Mannose CC1027 Mixed polysaccharides Analysis on Carbomix Pb-NP5:8% ( 7815 ) Column: Carbomix Pb-NP5:8% ( 5 µm, 8%, 7.8 x 150 mm ) Mobile phase: Water, Flow rate: 0.6 mL/min, Detector: RI ( 35 ℃ ) Column temperature: 80 ℃, Injection volume: 10 µL Samples: Cellobiose + Glucose + Xylose + Arabinose ( 5.0 mg/mL ) Pressure: 10 bar nRIU 8.110 6.841 7.268 40000 6.053 30000 20000 10000 0 0 2 4 6 8 10 12 min Cellobiose Glucose Xylose Arabinose CC1027 Mixed polysaccharides Analysis on Carbomix Pb-NP5:8% ( 7815 ) Column: Carbomix Pb-NP5:8% ( 5 µm, 8%, 7.8 x 150 mm ) Mobile phase: Water, Flow rate: 0.6 mL/min, Detector: RI ( 35 ℃ ) Column temperature: 80 ℃, Injection volume: 10 µL Samples: Cellobiose + Glucose + Mannose + Xylose + Arabinose ( 5.0 mg/mL ) Pressure: 10 bar nRIU 60000 Xylose 50000 Mannose Arabinose Glucose Cellobiose 40000 30000 20000 10000 0 2 4 6 8 10 12 min Cellobiose Glucose Xylose Arabinose/ Mannose CC1027 Mixed polysaccharides Analysis on Carbomix Pb-NP5:8% ( 7830 ) Column: Carbomix Pb-NP5:8% ( 5 µm, 8%, 7.8 x 300 mm ) Mobile phase: Water, Flow rate: 0.6 mL/min, Detector: RI ( 35 ℃ ), Column temperature: 80 ℃ Injection volume: 10 µL, Samples: Cellobiose + Glucose + Mannose ( 5.0 mg/mL ), Pressure: 27 bar nRIU 25000 11.794 10.053 20000 15.066 15000 10000 5000 0 0 2.5 5 7.5 10 12.5 15 17.5 min Cellobiose Glucose Mannose CC1027 Mixed polysaccharides Analysis on Carbomix Pb-NP5:8% ( 7830 ) Column: Carbomix Pb-NP5:8% ( 5 µm, 8%, 7.8 x 300 mm ) Mobile phase: Water, Flow rate: 0.6 mL/min, Detector: RI ( 35 ℃ ), Column temperature: 80 ℃ Injection volume: 10 µL, Samples: Cellobiose + Glucose + Xylose + Arabinose ( 5.0 mg/mL ) Pressure: 27 bar nRIU 12.796 14.681 11.797 30000 Xylose Glucose Arabinose 10.056 Cellobiose 20000 10000 0 0 2 4 6 8 10 12 14 16 18 min Cellobiose Glucose Xylose Arabinose CC1027 Mixed polysaccharides Analysis on Carbomix Pb-NP5:8% ( 7830 ) Column: Carbomix Pb-NP5:8% ( 5 µm, 8%, 7.8 x 300 mm ) Mobile phase: Water, Flow rate: 0.6 mL/min, Detector: RI ( 35 ℃ ), Column temperature: 80 ℃ Injection volume: 10 µL, Samples: Cellobiose + Glucose + Mannose + Xylose + Arabinose ( 5.0 mg/mL ) Pressure: 27 bar nRIU 12.793 14.703 Xylose Glucose Mannose Arabinose 30000 Cellobiose 11.794 10.054 20000 10000 0 0 2 4 6 8 10 12 14 16 18 min Cellobiose Glucose Xylose Arabinose /Mannose Tremella polysaccharide analysis on Zenix ( 7830 ) ZC1001 Column: Zenix-100 ( 3 µm, 100 Å, 7.8 x 300 mm), Zenix-80 ( 3 µm, 80 Å, 7.8 x 300 mm) Mobile phase: 0.7% Na2SO4 , Flow rate: 0.5 mL/min Detector: RI ( 35℃ ), Column temperature: 35℃, Injection volume: 10 µL Sample: 5 mg/mL Tremella polysaccharide in mobile phase nRIU 7000 10kD-100kD 6000 5000 4000 3000 Zenix-100 2000 1000 Zenix-80 0 0 5 10 15 20 25 min www.sepax-tech.com 1 Better Surface Chemistry for Better Separation © Sepax Technologies, Inc.

View Full Text

Details

  • File Type
    pdf
  • Upload Time
    -
  • Content Languages
    English
  • Upload User
    Anonymous/Not logged-in
  • File Pages
    46 Page
  • File Size
    -

Download

Channel Download Status
Express Download Enable

Copyright

We respect the copyrights and intellectual property rights of all users. All uploaded documents are either original works of the uploader or authorized works of the rightful owners.

  • Not to be reproduced or distributed without explicit permission.
  • Not used for commercial purposes outside of approved use cases.
  • Not used to infringe on the rights of the original creators.
  • If you believe any content infringes your copyright, please contact us immediately.

Support

For help with questions, suggestions, or problems, please contact us