ETSI EN 302 500-1 V1.1.1 (2007-02) European Standard (Telecommunications series) Electromagnetic compatibility and Radio spectrum Matters (ERM); Short Range Devices (SRD) using Ultra WideBand (UWB) technology; Location Tracking equipment operating in the frequency range from 6 GHz to 8,5 GHz; Part 1: Technical characteristics and test methods 2 ETSI EN 302 500-1 V1.1.1 (2007-02) Reference DEN/ERM-TG31C-004-1 Keywords radio, SRD, UWB, regulation, testing ETSI 650 Route des Lucioles F-06921 Sophia Antipolis Cedex - FRANCE Tel.: +33 4 92 94 42 00 Fax: +33 4 93 65 47 16 Siret N° 348 623 562 00017 - NAF 742 C Association à but non lucratif enregistrée à la Sous-Préfecture de Grasse (06) N° 7803/88 Important notice Individual copies of the present document can be downloaded from: http://www.etsi.org The present document may be made available in more than one electronic version or in print. In any case of existing or perceived difference in contents between such versions, the reference version is the Portable Document Format (PDF). In case of dispute, the reference shall be the printing on ETSI printers of the PDF version kept on a specific network drive within ETSI Secretariat. Users of the present document should be aware that the document may be subject to revision or change of status. Information on the current status of this and other ETSI documents is available at http://portal.etsi.org/tb/status/status.asp If you find errors in the present document, please send your comment to one of the following services: http://portal.etsi.org/chaircor/ETSI_support.asp Copyright Notification No part may be reproduced except as authorized by written permission. The copyright and the foregoing restriction extend to reproduction in all media. © European Telecommunications Standards Institute 2007. All rights reserved. DECTTM, PLUGTESTSTM and UMTSTM are Trade Marks of ETSI registered for the benefit of its Members. TIPHONTM and the TIPHON logo are Trade Marks currently being registered by ETSI for the benefit of its Members. 3GPPTM is a Trade Mark of ETSI registered for the benefit of its Members and of the 3GPP Organizational Partners. ETSI 3 ETSI EN 302 500-1 V1.1.1 (2007-02) Contents Intellectual Property Rights................................................................................................................................5 Foreword.............................................................................................................................................................5 1 Scope ........................................................................................................................................................7 2 References ................................................................................................................................................7 3 Definitions, symbols and abbreviations ...................................................................................................8 3.1 Definitions..........................................................................................................................................................8 3.2 Symbols..............................................................................................................................................................8 3.3 Abbreviations .....................................................................................................................................................8 4 Technical requirement specifications.......................................................................................................9 4.1 General requirements .........................................................................................................................................9 4.2 Presentation of equipment for testing purposes..................................................................................................9 4.2.1 Choice of model for testing ..........................................................................................................................9 4.2.1.1 Auxiliary test equipment.........................................................................................................................9 4.2.1.2 Declarations by the provider ...................................................................................................................9 4.3 Mechanical and electrical design........................................................................................................................9 4.3.1 General..........................................................................................................................................................9 4.3.2 Controls ........................................................................................................................................................9 4.3.3 Transmitter shut-off facility..........................................................................................................................9 4.3.4 Marking ......................................................................................................................................................10 4.3.4.1 Equipment identification.......................................................................................................................10 4.3.4.2 Additional information for the user.......................................................................................................10 4.4 Other device emissions.....................................................................................................................................10 5 Test conditions, power sources and ambient temperatures ....................................................................10 5.1 Normal and extreme test conditions .................................................................................................................10 5.2 Test power source.............................................................................................................................................10 5.2.1 External test power source..........................................................................................................................11 5.2.2 Internal test power source ...........................................................................................................................11 5.3 Normal test conditions......................................................................................................................................11 5.3.1 Normal temperature and humidity..............................................................................................................11 5.3.2 Normal test power source ...........................................................................................................................11 5.3.2.1 Mains voltage........................................................................................................................................11 5.3.2.2 Regulated lead-acid battery power sources ...........................................................................................11 5.3.2.3 Other power sources..............................................................................................................................11 6 General conditions..................................................................................................................................12 6.1 Normal test signals ...........................................................................................................................................12 6.2 Test sites and general arrangements for radiated measurements......................................................................12 6.3 Modes of operation of the transmitter ..............................................................................................................12 7 Interpretation of results ..........................................................................................................................12 7.1 Measurement uncertainty .................................................................................................................................12 7.1.1 Measurement uncertainty is equal to or less than maximum acceptable uncertainty..................................13 7.1.2 Measurement uncertainty is greater than maximum acceptable uncertainty...............................................13 7.2 Other emissions from device circuitry..............................................................................................................14 8 Methods of measurement and limits for transmitter parameters ............................................................14 8.1 General .............................................................................................................................................................14 8.2 Maximum mean e.i.r.p. spectral density...........................................................................................................14 8.2.1 Definition....................................................................................................................................................14 8.2.2 Methods of measurement............................................................................................................................14 8.2.3 Limits..........................................................................................................................................................15