Voltage-Level Translation Guide (Rev. H)

Voltage-Level Translation Guide (Rev. H)

Voltage Level Translation Guide Auto-Direction Sensing Direction Controlled Application-Specific ti.com/voltageleveltranslation 2014 Translation Guide Single-Supply Translators Table of Contents Single-Supply Translation Logic Introduction Single-Power Supply Translator Table of Contents In today’s complex and high-performance SN74AUP1Txx system environment, higher levels of Overview AUP technology is the industry’s lowest-power logic technology designed . The Key Features functional integration have led to lower Introduction . 2 SN74AUP1Txx is designed for logic-level translation applications with input switching • Low power consumption: ICC 0 .5 μA power consumption CMOS process levels that accept 1 .8-V LVCMOS signals, while operating from either a single 3 .3-V or • Schmitt-Trigger input: ΔVT = 210 mV, technologies operating at lower supply Single-Supply Translators 2 .5-V VCC supply . reject input noise voltage levels . The ability to mix, match Single-Supply Translation Logic . 3 The SN74AUP1Txx with configurable logic function (‘57,’58,’97,’98) can be easily • Nine configurable gate logic functions and support the simultaneous use of configured to perform a required gate function by connecting A, B, and C inputs to • ESD performance tested per JESD 22 different operating supply voltage levels Dual-Supply Translators V or ground (see datasheet) .Up to nine commonly used logic gate functions can be 2000-V human-body model on the same circuit board has led to the Five Classes of Voltage Translators . 4 CC performed . (A114-B, Class II) need for voltage-level translation . Bidirectional Voltage Translators . 5 1000-V charged-device model (C101) To remedy this problem of logic-threshold Single supply translators Auto-Direction Sensing Translators . 6 Applications incompatibility between the driver output Configurable Translators with Direction Control Portfolio . 8 • Personal electronics thresholds and receiver input thresholds, • Computing a voltage-level translator device from Configurable Unidirectional Translators . 9 • Industrial Texas Instruments should be used to Application Specific Translators . 10 Processor Peripheral • Automotive accomplish this . Translators by Application . 12 • Telecom To assist circuit design and system Dual Supply Translators by Bit Count . 13 engineers with their operating speed and SN74AUP1Txx lower-operating voltage level-translation Single and Dual-Supply Translators needs, Texas Instruments (TI) offers a Translators by Bit Count . 14 SN74AUP1Txx functional block diagram comprehensive voltage translation portfolio Additional Translators including dual-supply level translators; Get more information: ti.com/product/SN74AUP1Txx auto-direction sensing translators for FET Switches . 15 both push-pull buffered and open-drain Overvoltage-Tolerant Devices and TTL-Compatible Inputs and applications; and hybrid application- Open-Drain Output Devices . 15 specific translators optimized for today’s Single-Power Supply Translator constantly emerging signal standards . Resources SN74LVxTx Translation devices are needed in various Worldwide Technical Support . 16 SN74LV1T00 is a low voltage CMOS gate logic that operates at a wider voltage range Key Features markets such as consumer electronic, allowing generations of desired output levels to connect to controllers or processors . • Single-supply voltage 1 .8-5 .0 V VCC portable, computing, and networking The output level is referenced to the supply voltage and is able to support 1 .8 V/2 .5 • Operating range of 1 .8 V to 5 .5 V applications—wherever the need exists V/3 .3/5 V CMOS levels . • Up translation to interface lower operating processors 1 .2 V to 1 .8 V; 1 .8 V to 2 .5 V The input is designed with a lower threshold circuit to match 1 .8 V input logic at VCC = with higher operating legacy peripherals . 1 .8 V to 3 .3 V; 3 .3 V to 5 .0 V 3 .3 V and can be used in 1 .8 V to 3 .3 V level up translation . In addition, the 5 V tolerant • Down translation input pins enable down translation (e .g . 3 .3 V to 2 .5 V output at VCC = 2 .5 V) . Stereo Audio Subsystem Connectivity Display Subsystem 3 .3/2 .5 V to 1 .8 V; 5 .0/3 .3 V to 2 .5 V Headphone (Optional) Bluetooth® Haptics The SN74LV1T00 is designed with current-drive capability of 8 mA to reduce line WLAN Vibrator 5 .0 V to 3 .3 V SDIO/Audio reflections, overshoot, and undershoot caused by high-drive outputs . • –40°C to 125°C operating temperature Audio 3-axis Codec Accelerometer range Base-Band Signals Speaker Level Shifting Light • Packages available: SC-70 (DCK) C/SPI 2 Sensor I Shifting I2S Touch 2 mm × 1 .25 mm (DCK) I2C/SPI 2 I C I2C Screen Shifting Controller LCD 2 .9 mm × 1 .6 mm (DBV) Display Microphone Application Processor DSS Display • Supports standard logic pinouts Shifting Applications SDIO SD CARD • Industrial controllers Level Shifting IC-USB Level Shifting • Telecom SD Card SIM Card Level Shifting • Portable applications IC-USB • Servers SN74LVxTxx functional block diagram • PC and notebooks SIM Card • Automotive Get more information: ti.com/product/SN74LVxTxx Portable electronic block diagram 2 | Translation Guide 2014 Texas Instruments Texas Instruments Translation Guide 2014 | 3 Dual-Supply Translators Dual-Supply Translators Five Classes of Voltage Translators Bidirectional Voltage Translators Bidirectional Multi-Voltage Translator LSF010x The LSF family are bidirectional voltage level translators operational from 1 .0 V to Key Features 4 .5 V (VREF_A) and 1 .8 V to 5 .5 V (VREF_B) . This allows bidirectional voltage translations • Provides bidirectional voltage translation Auto-direction sensing translators Bidirectional multi-voltage for Dual-supply between 1 .0 V and 5 .0 V without the need for a direction terminal in open-drain • Less than 1 .5 ns max propagation delay for open-drain applications open-drain & push-pull translators configurable translators or push-pull applications . LSF family supports level translation applications with • High speed translation > 100 MHz transmission speeds greater than 100 Mbps for open-drain systems utilizing a 30 pF • Supports hot insertion capacitance and 250Ω pull-up resistor . • 5 V Tolerance I/O port to support TTL The low Ron of the switch allows connections to be made with minimal propagation • Low ron provides less signal distortion VccA VccB VccA VccB VccA VccB delay and signal distortion . Assuming the higher voltage is on the Bn port . • Flow-through pinout for ease PCB trace routing • –40°C to 125°C operating temperature range A B A B A B VccA VccB • ESD performance tested per JESD 22 DIR Applications • GPIO, MDIO, PMBus, SMBus, SDIO, TXS010x/E LSF0101/LSF0102/LSF0108 SN74AVCxT45/245/234/244 UART, I2C, and other interfaces in and SN74LVCxT45/245 Processor Peripheral telecom infrastructure • Industrial • Personal computing LSF010x functional block diagram • Automotive Application-specific translators Get more information: ti.com/product/LSF010x Auto-direction sensing translators (memory card and SIM card interfaces) GTL2014 4-Bit LVTTL to GTL Bidirectional Transceiver SN74GTL2014 VccA VccB VccA VccB The SN74GTL2014 is a 4-bits translator to interface between 3 .3-V LVTTL chip set Key Features I/O and Xeon processor GTL–/GTL/GTL+ I/O . The SN74GTL2014 integrates ESD • Operates as a GTL–/GTL/GTL+ to protection cells on all terminals and is available in a TSSOP package (5 .0 mm × 4 .4 mm) . LVTTL or LVTTL to GTL–/GTL/GTL+ CMD_A CMD_B The device is characterized over the free air temperature range of –40°C to 85°C . translator A B 4 4 • The LVTTL input are tolerant up to 5 .5 V DATA_A DATA_B GTL2014PW allowing direct access to TTL or 5V CMOS CLK_A CLK_B • The GTL input/output operate up to B0 + A0 - 3 .6 V, allowing the device to be used in TXB010x and TXB030x TXS02xxx and TXS45xx high voltage open-drain applications DIR 1 14 V CC • VREF goes down to 0 .5 V for low voltage B0 2 13 A0 + B1 - A1 CPU usage B1 3 12 A1 • Partial power-down permitted VREF 4 GTL2014PW 11 GDN B2 5 10 A2 • Latch-up protection exceed 500 mA B2 + A2 B3 6 9 A3 - per JESD78 GND 7 8 GND • ESD protection on all terminals 2k V HBM, JESD22-A114 B3 + A3 - 1k V CDM, IEC61000-4-2 Applications VREF DIR • Server SN74GTL2014 functional block diagram • Base station • Wireline communication Get more information: ti.com/product/SN74GTL2014 4 | Translation Guide 2014 Texas Instruments Texas Instruments Translation Guide 2014 | 5 Dual-Supply Translators Dual-Supply Translators Auto-Direction Sensing Translators Auto-Direction Sensing Translators Auto-Direction Sensing Translator Portfolio Bidirectional, Auto-Direction Sensing Translators Key Features TI’s auto-direction sensing translation devices are ideal for point-to-point topologies when • Auto-direction sensing — TXB010x interfacing devices may be operating at different interface voltage levels . They improve no direction control signal needed These non-inverting translators use two separate configurable power-supply rails . The Key Features connectivity between next-generation processors and peripheral devices by eliminat- • Automatic reconfigurable I/O buffers — A port is designed to track VCCA . VCCA accepts any supply voltage from 1 .2 V to 3 .6 V . • Optimized for push-pull drivers ing the requirement for direction-control signals used by traditional voltage-level transla- each I/O port is configured The B port is designed to track VCCB . VCCB accepts any supply voltage from 1 .65 V to • 100 Mbps max data rate transfer tion devices . This decreases the control software complexity while saving valuable GPIO as both an input and an output 5 .5 V . This allows for universal low-voltage bidirectional translation between any of the • VCC isolation feature signals on core processors . • Integrated pull-up resistors — 1 .2-V, 1 .5-V, 1 .8-V, 2 .5-V, 3 .3-V, and 5-V voltage nodes . VCCA should not exceed VCCB . • OE input circuit referenced to VCCA provides modest DC-bias and • Low power consumption When the output-enable (OE) input is low, all outputs are placed in the high-impedance current sourcing capabilities while • I supports operation in partial- state .

View Full Text

Details

  • File Type
    pdf
  • Upload Time
    -
  • Content Languages
    English
  • Upload User
    Anonymous/Not logged-in
  • File Pages
    10 Page
  • File Size
    -

Download

Channel Download Status
Express Download Enable

Copyright

We respect the copyrights and intellectual property rights of all users. All uploaded documents are either original works of the uploader or authorized works of the rightful owners.

  • Not to be reproduced or distributed without explicit permission.
  • Not used for commercial purposes outside of approved use cases.
  • Not used to infringe on the rights of the original creators.
  • If you believe any content infringes your copyright, please contact us immediately.

Support

For help with questions, suggestions, or problems, please contact us