Technical data and authorisations: SDAH Fuel trailer in IBC-Configuration Inkl German vehicle documents, authorised for transporting, storing and handling of highly inflammable liquids. Type: ZAA 1,4 Standard or de Luxe version. Gross weight: 1400 kg (loadable up to 1800 kg) Empty weight: 620 kg incl. IBC-Tank + accessories Max. load per axle: 1000 kg (optional shock absorbers) Standard de Luxe (with dome) Length: 3,35 m Width: 1,74 m Height: 2,38 m 1,84 m (1,96m) IBC for ADR packing groups II und III Nominal volume: 1000 l Net volume: 950 l Empty weight: 280 kg Standard-Version Hazard classes: AI - AIII, B gasoline, kerosene, diesel ADR transport approval: road, rail, sea Construction as per double wall, horizontal, TRbF/TRwS: explosion pressure + shock proofed, vacuum leak-monitoring, hot-dip galvanized in- and outside, optional stainless steel filling: 2½“ tank truck standard, limiting sensor or pistol at filling station tapping: 12m tapping hose with equipotential bonding, earth rod, Tap output: 35 or 60 l/min, Motor: 1 Ph 230V; 350/650 Watt (alternatively 12/24V DC) IBC-Authorisation (Europe conformity) Nr.:D/BAM 5639/31A Type approval #: UN 31A/Y/03.02/D/rietberg/BAM5639/0/1405 de Luxe-Version All rights reserved, including rights for technical modifications. Registered utility model! Calibratable Version Airfield Development and manufacturing of workshop equipments, testing technologies and fuel tank construction for aviation + road. Fuel Trailer Fa. Wilhelm Maul Am Stadtwald 19-23 IBC-1000 D-08525 Plauen for Tel: +49 3741 5485 11 Fax: +49 3741 5485 59 MOGAS UN 1203 Mob.: +49 172 37860 66 AVGAS UN 1203 e-mail: [email protected] http: www.maul-tank.de KEROSENE UN 1863 Member of SAXON-Group, AOPA-Germany – DAeC DIESEL UN 1202 Which are the Legal Provisions to consider? - Road Traffic Regulations (STVO, ADR, GGVSE) - Operation Rules (BetrSiV, TRbF, Ex-Protection) - Stocking Legislation (WHG, TRwS, Fire Prevention) Already before issuing the road traffic license, the compliance with the official rules and regulations is reassured by experts reports. It remains to the operator, to check conformity with the local defaults and conditions before usage of the units. Tank trailers in IBC-Version < 1000 Liters are „supervision indigent“ and therefore subject to notification to the local authorities before usage. Which Equipments, which Powersource? IBC-Tank containers (without undercarriage) are equated to Which drivers license do I need? For own needs, e.g. Flying Clubs, a basic ex-pump with stationary fuelling stations and are therefore subject to counter (adjustable but not gaugeable) is required. authorisation even if installed as a supplement The transporting unit (drawing car + trailer) is approved up to If used commercially calibration is a must. to already existing systems. a total weight of 3.5 to and requires a drivers license for The standard pump runs on 230V AC, which is normally trailers up to 750 kg. available near airport facilities, or it can be drawn from the car Up to the 31st December 2006 no extra transporting power system or a generator, using an AC/DC transverter. permission is needed up to 3,5 to.(transition rule Europe). Alternatively a 12V or 24V DC pump is available if needed. The bus bar must be outside of the 3m-EX-Zone. Thereafter a basic seminar for transport of dangerous goods is requested. The filtration with water absorber is advised in any case. A general release from visiting this seminar is the rule, as An additional pump unit allows for suction defuelling back into FAQ’s long as the IBC-approved tank is filled with „small quantities“ the IBC tank. The earthing cable is recoiled manually meaning <333 litres net within bulk group II (e.g. benzine) or whereby a mechanical spooling unit is available on request. <1'000 litres net within bulk group III (e.g. diesel + kerosene). Just ask for further options! But it still is a transport of dangerous goods, which must be secured safely, labelled properly and equipped with the above specified security kit, delivered together with the tank.. How can I examine the concentration of alcohol in “mogas” according to EN 228? Basic alcohol up to a volume content of one % is permitted in “mogas” and at the same time desired to keep the flow path clean and open. To ensure the compliance with the boundary value, a sample of ½ lt. is filled into a calibrated testing bottle and mixed with a coloured reagent fluid. After shaking the liquids, the coloured particles flow into the measuring tube, from where the fraction of alcohol can be read. The measuring method is certified and the result is registered as a supervision proof into the tank filling record. The testing case can be delivered together with the IBC tank. Before shaking after shaking .