SAMTEC Automotive Software & Electronics PRODUCT CATALOG 2016 AUTOMOTIVE www.samtec.de PUBLICATION DETAILS 2 CONTACT samtec automotive software & electronics gmbh Einhornstr. 10, D-72138 Kirchentellinsfurt - Germany Phone +49-7121-9937-0 Telefax +49-7121-9937-177 Internet www.samtec.de E-mail [email protected] DISCLAIMER The information contained in this catalog corresponds to the technical status at the time of printing and is passed on with the best of our knowledge. The information in this catalog is in no event a basis for warranty claims or contractual agreements concerning the described products and may especially not be deemed as warranty concerning the quality and durability pursuant to Sec. 443 German Civil Code. samtec automotive software & electronics gmbh reserves the right to make any alterations to this catalog without prior notice. The actual design of products may deviate from the information contained in the catalog if technical alterations and product improvements so require. In any cases, only the proposal made by samtec automotive software & electronics gmbh for a concrete application or product will be binding. All mentioned product names are either registered or unregistered trademarks of their respective owners. Errors and omissions excepted. This catalog has been made available to our customers and interested parties free of charge. It may not, in part or in its entirety, be reproduced in any form without our prior consent. All rights reserved. LEGAL NOTICE samtec automotive software & electronics gmbh Managing directors: René von Stillfried, Dr. Wolfgang Trier Registered office: Kirchentellinsfurt Date: March 2016 Commercial register: Stuttgart, HRB 224968 PREFACE Dear readers, 3 Many of you already know us! You deploy electronic control units, we provide you with the diagnostic solutions. Whether for ECU networks in vehicles, for test benches or for ECU production, we offer you the right products and expertise. Our customers are mainly OEM and ECU manufacturers in the automotive industry. They deploy our hard- and software products in development departments, use our residual bus simulations with concurrent diagnostics at engine test benches or assembly inspection lines, but also for holistic WLAN-based production lines and even to a complete aftermarket service tester. Since the merger with the Softing AG, our customers not only appreciate our growth as a company, but mainly our unique innovative product lines and our broad know-how in the automotive segment. With combined forces, together with our parent company, we are currently developing new products in the area of software as well as in a new concerted hardware portfolio. Our main focus here is on our expertise in the commercial vehicle sector but also in the production of vehicles and ECUs. As confirmed by our growth, our customers are confident that our tools and solutions can be holistically applied in all areas for development, production and service departments. The benefits of a single tool chain in the automotive segment of the Softing AG have been expanded through the close cooperation with our sister companies. Especially convincing to our customers and employees are the interlocking solutions of customized software applications, diagnostic run-time systems and optimized hardware products for all diagnostic use cases. We are looking forward to your visit! Yours René von Stillfried Managing director, samtec automotive software & electronics gmbh Kirchentellinsfurt, March 2016 4 TABLE OF CONTENT 5 Product Overview Hardware Features .......................................................................6 Supported Protocols ....................................................................7 Communication Technology VIN|ING 1000 ...............................................................................8 HSC Family ..................................................................................10 HSX Family ..................................................................................12 HSX Modules ..............................................................................14 HSX Heavy Duty ..........................................................................15 Resident Block Sequencer ..........................................................16 samPDU API ................................................................................17 VCF ..............................................................................................18 VCF Features and Modules ........................................................21 Diagnostics DTS .............................................................................................22 samDia ........................................................................................24 Softing TDX .................................................................................26 OTX Studio ..................................................................................28 Test Systems Electric Testing ...........................................................................29 Measurement Technology SMT .............................................................................................30 μ-Series .......................................................................................31 Engineering Services EPTS ...........................................................................................32 samtec expertise ........................................................................33 COMMUNICATION TECHNOLOGY Hardware Features 6 HARDWARE FEATURES VIN|ING 1000 HSC HSX HSX HD FlexRay/Controller - - up to 4 - CAN High-Speed/Channels up to 2 up to 4 up to 8 1 CAN Fault-Tolerant/Channels 1* 1* up to 5 - CAN Single Wire/Channels - - up to 5 - CAN Truck to Trailer/Channels - - up to 3 - K-Line ISO 9141/Channels 2 up to 4 2 2 LIN/Channels 1 - 2 - SAE J1708 / J1587 - - Datalogger - - MVCI PDU-API SAE J2534 Pass-Thru USB Interface Ethernet Interface - - WLAN Interface - - DoIP - - SD Card Slot - - - Internal Storage* - - - Digital I/O up to 2 up to 2 3 3 Analog Inputs up to 2 up to 2 3 3 Firmware Update Rugged Casing Integrated OBD Connector - - - * = optional COMMUNICATION TECHNOLOGY Supported Protocols 7 PROTOKOLLE VIN|ING 1000 HSC HSX HSX HD CAN Analyzer 1 1 1 1 CAN Direct UDS (ISO 14229) T T T/S T/S KWP 2000 on CAN (ISO 14230-3 on ISO 15765-2) T T T/S T/S ISOTP (ISO 15765-2) GMLAN X4400 T T T/S T/S SAE J1939 TP 1.6 T T T/S T/S TP 2.0 T T T/S T/S CCP T T T T XCP on CAN T T T/• T/• FLEXRAY FlexRay Direct UDS on AUTOSAR FrTP T/S UDS on ISO 10681-2 T/S UDS on OEM TP T/S AUTOSAR FrTp ISO 10681-2 XCP on FlexRay T/• K-LINE Analyzer UART Direct T KWP 2000 on K-Line (ISO 14230-3 on ISO 14230-2) T T T/S T KW 500 T T T T KW 71 / KW 1281 T T T/S T CARB T T T/S T DS2 • • • • H99B • • • • FREE • • • • OTHER J1708 / 1587 LIN 1.3 LIN 2.0 LIN 2.1 UDS on LIN UDS on Ethernet (DoIP, ISO 13400) T • XCP on Ethernet • Ethernet UDP BLOCK SEQUENCER Resident • = Feature available • = Feature planned T = Tester (Stimulator) available 1 = The CAN analyzer function is operated S = Simulator available through the CAN direct driver. Software interfaces The standardized D-PDU API (ISO 22900-2) supports the most important communication protocols: UDS (ISO 14229), KWP 2000 (ISO 14230, ISO 15765) and SAE J1939. The VCI can also be used as an alternative Pass-Thru device in accordance with SAE J2534. Together with the diagnostic tool set DTS from Softing, it is possible to implement a complete solution in accordance with MCD-3D standard ISO 22900-3 with ODX technology. COMMUNICATION TECHNOLOGY VIN|ING 1000 Compact base interface (VCI) for vehicle electronics AREAS OF APPLICATION BENEFITS ■ Mobile applications for vehicle development ■ Modern, cost-effective base VCI and service (aftermarket) ■ Multiple independent communication channels: 8 ■ Fast and secure ECU programming CAN, K-Line and LIN ■ Customer specific variants for diagnostic or service ■ Real time execution of vehicle bus protocols directly testers with own branding on the interface guarantees fast reaction time and ■ Designed for automobiles and utility vehicles reliable real time behaviour independent from the PC operating system ■ Wireless diagnostics via Bluetooth and tethered diagnostics via USB ■ Interface power supply via USB (optional) ■ Compact and robust aluminium housing with D-Sub and USB connector ■ Electrical isolation between host and vehicle interfaces The sturdy metal housing of the VIN|ING 1000 VCI is designed SOFTWARE INTERFACES for harsh manufacturing and repair shop environments as The standardized D-PDU API (ISO 22900-2) supports the most well as for customer-specific projects at ECU manufacturers. important communication protocols: UDS (ISO 14229), KWP This VCI is particularly suitable for mobile service applications 2000 (ISO 14230, ISO 15765) and SAE J1939. The VCI can also be thanks to its compact design and the fact that it offers Blue- used as an alternative Pass-Thru device in accordance to SAE tooth or USB as the interface to the PC and CAN and K-Line as J2534. Together with the diagnostic tool set DTS from Softing, the interface to the vehicle. it is possible to implement a complete solution in accordance to MCD-3D standard ISO 22900-3 with ODX technology. DIAGNOSTIC SYSTEM ARCHITECTURE The samtec VCIs are suitable for operation with the standard- MOBILITY ized D-PDU API and with the VCI Communication Framework The Bluetooth interface enables the VIN|ING 1000 for mobile (VCF). These interfaces enable complete