INTERCOMNAMM 2019 Booth # 14716 ACC North Hall KL-8 Total Keyboard Control The KL-8 is a rackmount keyboard mixing station designed to provide complete con- trol over a professional keyboard setup, both on-stage and in the recording studio. Equipped with four analog inputs, redun- dant USB and MIDI connectivity, the KL-8 can interface with any gear. Isolated out- puts gives you pristine signal to the front of house with monitor and headphone outputs to give you control of your mix. DAN-TX2 & DAN-RX2 Stereo Dante transmit & receive boxes The DAN-RX2 and DAN-TX2 are the latest additions to the Radial DiNET family of high quality Dante-enabled endpoints for networked audio systems. Featuring locking Ethernet connections, rock solid construction, and the abili- ty to be easily rack-mounted, both are well suited for permanent installations or the rigorous demands of pro touring acts. SW8-USB 8-channel auto-switcher and USB interface The SW8-USB provides a simplified and robust solution for performances that utilize redundant playback systems on stage. Dual USB inputs allow you to connect directly to your primary and backup computers, eliminating the need for additional audio interfaces. Should your primary rig fail, the SW8- USB automatically switches over to the backup system, ensuring a seamless performance each and every time. Shipping Spring 2019 SW8-USB Backing track auto switcher The SW8-USB is an all-in-one solution for perfor- mances that employ redundant playback systems for backing tracks, combining two built-in high performance USB interfaces with an auto-switching feature that detects dropouts and effortlessly switch- es to the backup computer in an instant. Dual USB inputs with separate 24bit/192kHz converters allow two computers to be connected in tandem, so digital workstations on both machines can connect to the SW8-USB as an audio and MIDI interface. MTC can also be passed between both computers, providing easy start/stop synchronization between them. Eight channels of transformer-isolated XLR and ¼” out- puts are included, with the ability to switch between mic-level and +4dB line level sends to the PA system. With the SW8-USB, switching between playback rigs has never been easier or more streamlined! ® Radial Engineering Ltd. © Copyright 2019 all rights reserved Specifications, appearance and price subject to change without notice. Total Keyboard Control Now Shipping KL-8 Rackmount Keyboard Mixer Analog Inputs The KL-8 is a rackmount keyboard mixing sta- Headphone tion designed to provide complete control over a Out professional keyboard setup, both on-stage and in the studio. You can connect up to four keyboards MIDI in mono or stereo, with incredible headroom and a Monitor stereo Aux send and receive for connecting out- board effects units. Two sets of XLR outputs allow you to send signal to FOH and a set of powered monitors on stage, with transformer isolation to eliminate noise from ground loops. Remote USB Input Footswitch Aux Send/Recv Main Outputs Headphone outputs are also provided for local monitoring, along with cue switches to silently test individual inputs and adjust patch settings. MIDI • Four stereo analog inputs for keyboards and USB connections make it easy to control a laptop soft-synth with high quality 24bit/192kHz • Redundant USB connections for laptop soft-synths digital audio converters, and dual USB connections • Stereo Aux Send/Receive with optional footswitch control provide the ability to employ redundant laptop sys- • Headphone outputs and cue switches for silent monitoring tems, ensuring the audience never misses a single • Link multiple KL-8s for larger setups note of your performance. ® Radial Engineering Ltd. © Copyright 2019 all rights reserved Specifications, appearance and price subject to change without notice. DAN-TX2 & DAN-RX2 Dante end points The Radial DiNET DAN-TX2 transmitter and DAN-RX2 receiver are expanded versions of the popular DAN-TX and DAN-RX Dante inter- faces, designed to deliver high quality 24bit/96kHz across any Dante or AES67-compliant network. Both feature locking Neutrik Ethercon connectors required for professional touring applications, and the ability to be mounted in standard 19” equipment racks using the Radial SA series rackmount kit. Shipping Spring 2019 DAN-TX2 DAN-TX2 Dante Network DAN-TX2 The DAN-TX2 is a two channel analog-to-digital converter that allows you to connect any line level source to the network, with combo XLR/¼” balanced inputs, RCA and 3.5mm connections, and separate trim and pad controls for each channel. For ease of use with stereo sources, a link switch allows a single pad and trim control to adjust both channels equally. Dante Network DAN-RX2 DAN-RX2 Shipping Spring 2019 DAN-RX2 The DAN-RX2 is a two channel endpoint with analog outputs, featur- ing a network input and balanced XLR outputs with a ground lift to help eliminate noise. It also includes a powerful headphone amplifier with 3.5mm and ¼” outputs that can be used for testing or personal monitoring at any location on the Dante network. ® Radial Engineering Ltd. © Copyright 2019 all rights reserved Specifications, appearance and price subject to change without notice. Four Amps, Zero Noise Headlight-Pro Four-Output Guitar Amp Selector The Headlight-Pro allows you to connect up to four amps and select them in any combination, for flawless noise-free amp switching on stage. The input features a class-A buffer along with Drag Control load correction that allows you to optimize the impedance for your pickups and recreate the feel of plug- ging your guitar directly into an amp. In addition to a separate output for a tuner, four amplifier outputs include transformer isolation to eliminate hum and buzz from ground loops. Each output also includes a ground lift to further reduce noise, and a 180° polarity switch to correct for pedals and amps that are wired out-of-phase. Individual footswitch control is provided for each amp output with bright LEDs for instant visual feed- back, so control over all of your amplifiers is always available right at your feet. The Headlight-Pro runs off 9VDC, and can be powered using standard guitar pedal power supplies and multi-output power bricks. ® Radial Engineering Ltd. © Copyright 2019 all rights reserved Specifications, appearance and price subject to change without notice. Take your room out of the mix “My new studio is the best sounding personal space I’ve ever had. The products we installed from Primacoustic have helped me bring it all together. The control room and recording spaces sound fantastic.” ~ Jacquire King Kings of Leon, James Bay, Modest Mouse, You Me At Six, Buddy Guy, Of Monsters and Men, Josh Ritter, Cold War Kids, City and Colour Room Kits Bass Traps Diffusers Ceiling Clouds London 8 Full Trap Razorblade Stratus Control your room with Primacoustic www.primacoustic.com Primacoustic has everything you need to turn your room into a great sounding studio! Carefully designed to address acoustic concerns that are common to all rooms, Primacoustic offers a selection of absorptive panels and diffusers to con- trol primary reflections, flutter echo and excessive bass. 3 Reasons to Reamp 1. PLAY NOW, TWEAK LATER 2. KEEP YOUR OPTIONS OPEN 3. UNLEASH YOUR CREATIVITY Save time (and your guitar player’s Sometimes you can record a guitar Reamping gives you the freedom to fingers) by recording a direct track track that sounds great on its own, explore unlimited sonic possibilities with a high quality DI box like the only to find that it doesn’t quite sit by using any combination of pedals, Radial J48. This allows you to record right in the overall mix. Instead of amps, and microphones to create their performance without commit- spending time trying to EQ the guitar new and unique sounds. Reamping ting to the guitar tone, giving you the or re-recording the track entirely, use isn’t limited to just guitars - any ability to Reamp later on and explore a Reamp to audition a range of amps recorded track can be fed into a different tonal options without ask- and effects to find the tone that best Reamp box, so you can experiment ing the guitarist to perform the piece suits the song. Try recording through with vocals, drum tracks, or anything over and over again. multiple amps and blending the in between. Using the Radial EXTC, tracks together for a full, lush sound. you can send tracks through your fa- vorite guitar pedal and back into your recording interface without using an How to Reamp amp, opening up even more options when recording and mixing. Learn how to Reamp www.radialeng.com/reamp Step-1: Record dry track Step-2: Reamp it! ® Radial Engineering Ltd. © Copyright 2019 all rights reserved Specifications, appearance and price subject to change without notice. The New BUZZ Killer from Jensen SUB-XX Single-Channel Sub Isolator The ISO-MAX SUB-XX is a single channel low-frequency isolator designed es- pecially for use with subwoofers to eliminate hum and buzz caused by ground loops. Inside, a specially designed Jensen audio transformer with extended subsonic response delivers powerful and articulated bass for maximum impact. Even when being subjected to extremes, the SUB-XX is able to grace- fully handle low frequencies down to 20 Hz with less than 0.01% distortion and less than 1° of phase shift. And with better than 100 dB of common mode noise rejection, it solves the most difficult installation problems so that you can enjoy the full performance of your audio system without noise. PI-RJ2X Audio to CAT 5 Converter The PI-RJ2X is a set of two-channel isolators used to send and receive +4dB pro level audio over CAT 5/6 cable for easy integration with existing network wiring.