Cope and Stick Inside Edge Profiles IE1 IE2 IE3 IE4 IE5 IE6 IE7 IE9 IE13 IE14 Cope and Stick, Combination Frame and Veneer Outside Edge Profiles 1/8” OE1 OE2 OE3 OE4 3/8” OE5 OE6 OE7 OE8 OE9 OE11 OE13 OE14 1/4” OE15 OE20 OE21 1/8” OEABD* 1.5mm EB 3mm EB *Additional sq. ft. or per piece Veneer Doors Veneer Doors charge applies. OEABD is available only on slab drawer fronts. Orders and Information: 512.352.6355 or 866.585.7623 Fax: 512.853.4077 © 2021 TaylorCraft Cabinet Door Company, LP Profiles are shown smaller than actual size. Panel Profiles (Noted panel reveal is approximate and can vary due to expansion/contraction) 5/16” 1-1/8” 1-5/16” RP1 RP3 RP4 3/4” 1” 1-3/16” RP12 RP13 RP5* 1” 1-1/2” RP6 RP7 1-5/16” 1-5/16” 1-1/8” RP9 RP11 RP20 1-1/16” 1-1/16” RP14 RP15 FP3/8"ǂ FP3/8” VG* FP3/8" BD* (MDF Core) (Solid Wood) (Solid Wood) 1-3/8” 1-3/4” FP1/4"ǂ » » (MDF Core) RPAM1 RPAM2 »RPAM1 and RPAM2 are for use on Inside Applied Molding Doors. Reveal varies depending on which applied molding is used. *Additional charge applies for RP5, v-groove and beaded v-groove panels. Cathedral and eyebrow arch doors are not available with RP5. *FP3/8” VG and FP3/8” BD grooves and beads are centered on panel and are 2” apart on center. These profiles are solid wood panels so solid, raised panel minimums apply. ǂ1/4” and 3/8” MDF core panels have the same species on face and back of the panel for all standard species. 1/4” panels are true 1/4” thickness. Inside Edge Applied Molding Profiles AIM1 (1-1/16” wide) AIM2 (1-3/8” wide) Inside edge applied moldings are available on cope and stick door styles using FP3/8”, RPAM1 or RPAM2 and any outside edge. Orders and Information: 512.352.6355 or 866.585.7623 Fax: 512.853.4077 Profiles are shown smaller than actual size. © 2021 TaylorCraft Cabinet Door Company, LP Mitered Frame Profile Options M# designation is 2-3/8” wide profile. M#-D designation is 1-5/8” wide drawer front profile. MW# designation is 3-1/8” wide profile. M1 M1-D M3 MW3 M3-D M4 Suggested Drawer Front is M3-D M6 MW4 M6-D M7 MW6 MW6-D Suggested Drawer Front is M8 M24-D M15 MW15 M15-D M24 MW24 M24-D (Formerly called M2) (Formerly called M2-D) M26 MW26 M26-D MW2 MW2-D MW8 MW8-D MW9 MW9-D Profiles are smaller than actual size and not to scale. Orders and Info: 512.352.6355 MW10 MW10-D © 2021 TaylorCraft Cabinet Door Company, LP.