<p>Mixer – Industrial Stationary Safe Work Procedure</p><p>Page 1 of 3 WSHMS-02C-SWP-099</p><p>Division: RETSD Analysis By: Kildonan- Date: Jun/25/2009 East Staff</p><p>Department: Kildonan-East Collegiate Supervisor: Frequency: Hourly</p><p>Job Title: Culinary Arts Approved By: JSA Number: CA4</p><p>Job Title: Floor Mixer CA4 Job Performed By: Teacher and or stude nts</p><p>REQUIRED PERSONAL PROTECTIVE EQUIPMENT: Chef jacket, aprons, hair nets and chef hat.</p><p>GENERAL NOTES: No nail polish, gel nails, jewelry (including watches), cell phones, or music devices allowed in the kitchen.</p><p>JOB SAFETY ANALYSIS:</p><p>Step Description Hazard Controls 1 Place appropriate mixing SKIN/EYES: Risk of splashing spattering Ensure the machine is switched off before moving food product attachment on floor mixer and food particles. FINGERS/HANDS/ARMS; around in the bowl. Ensure bowl is locked into place or gears will lock into place. food product in risk of getting fingers/ hands or forearm wear down in the machine. Never operate without the safety guard mixing bowl. Place safety guard caught in machine blade while operating. on. on mixing bowl. Turn mixer on using lowest setting first. Gradually increase speed as needed. Stop mixer to scrape bowl and move food product. Stop mixer once mixing is complete. Remove food product from bowl.</p><p>Page 1 of 3 Print Date: Jun/25/2009 2 Ensure the mixer is turned off. Sanitizing solution splashed into eyes or See MSDS for safety procedures. Wear personal protective equipment Remove the bowl and on skin while cleaning. while using sanitizer. attachments from the mixer and wash in 3 compartment sink or through dish machine. Using sanitizing solution, clean mixer base, top, and sides with warm soapy water. 1 Food Grinder Attachment Dropping heavy grinder on foot. Ensure grinder is on a stable cart to prevent lifting and carrying for Instructions any distance.</p><p>Assemble grinder attachment as specified on assembly chart. 2 Ensure guard is down on the Grinder may fall if not secure. Hands may Grinder will not work if guard is in the up position. floor mixer. Attach grinder to be caught in the grinder shaft. floor mixer by securely tightening the grinder attachment to the floor mixer. 3 Place feeding tray on top of the Food may spill on floor - slipping hazard. Always use all equipment provided by company and use per grinder shaft. Have a cart or instructions. Prevent any spills on the floor. table ready with the container for ground food. 4 Slowly put in the food using only Do not use items other than stomper (i.e. Use proper equipment. the stomper to push food Wooden spoon) to push food items particles into the grinder. When through the grinder. complete, turn machine to the off position. 5 Grinder is ready to disassemble, wash, rinse and sanitize grinder and attachments. Clean the floor and sanitize the grinder and attachments. Clean the floor mixer and surrounding area of food particles.</p><p>AUTHORIZED EMPLOYEE INFORMATION:</p><p>ID NUMBER: LAST NAME: FIRST NAME: REMARKS: JOB HISTORY INFORMATION: Mixer – Industrial Stationary Safe Work Procedure</p><p>Page 3 of 3 WSHMS-02C-SWP-099</p><p>DATE: REMARKS:</p><p>Approval Signature: Date: </p><p>Page 3 of 3 Print Date: Jun/25/2009</p>