<p> UNIT D2, THE COURT KESTREL ROAD (Off GUINNESS ROAD) TRAFFORD PARK MANCHESTER. M17 1SF</p><p>TEL: - 0161 872 7618 FAX: - 0161 876 4597 Email: - [email protected]</p><p>P.R. MULTI-PURPOSE EPOXY RESIN SYSTEM</p><p>TECHNICAL DATA SHEET</p><p>Based on Resin Component A & Curing Agent Component B (Modified Epoxy Resin PR-5C) (Curing Agent PR-38)</p><p>USES</p><p>P.R. Multi-Purpose Epoxy Resin System is designed for use on a variety of substrates, it is a simple to apply all-purpose epoxy, which can be used for gluing, coating, laminating and filling. It is now established as the primary epoxy system for the manufacture and repair of wooden boats. P.R. Multi-Purpose Epoxy Resin System is a most effective glue for bonding wood, metals, stone and concrete. To enhance gap-filling properties and prevent glue-starved joints, the appropriate filler powders can be added to the mixed resin/hardener to make a “thicker” mix.</p><p>DESCRIPTION</p><p>P.R. Multi-Purpose Epoxy Resin System is based on a blend of Epoxy Resin and Curing Agent binder giving the low viscosity characteristics necessary to wet the substrate, giving good penetration properties.</p><p>ADVANTAGES</p><p>1. Solvent Free. 2. Low viscosity – giving easy application. 3. Excellent adhesion to a variety of substrates. 4. Good “wetting out” and penetration properties. 5. Low odour, suitable for use in food factories. 6. Good curing performance at low temperatures. 7. Good colour and colour stability 8. Can be used as a general-purpose primer to a wide range of substrates. 9. Easy and convenient mixing ratio: by volume : by weight Resin A – PR-5C : Curing Agent B – PR-38 2 : 1</p><p>FORMULATOR OF EPOXY RESIN BASED PRODUCTS 1 FLOORING GROUTS COATINGS ADHESIVES etc.</p><p>VAT Reg No: 519 5418 33 REGISTERED IN ENGLAND No: 2230243 Directors: P. RAWAL. A. RAWAL.</p><p>TECHNICAL DATA</p><p>Mixed viscosity of binder @ 25°C – Poise 3 – 6 Minimum application temperature ° C 5 Usable time (1.0kg mix) @ 20°C 20 - 30 minutes </p><p>APPLICATION GUIDELINES Surface preparation</p><p>The substrate should be clean, free from laitance, oil, grease or other agents, which may impair adhesion.</p><p>Techniques should include (depending on degree of contamination) acid etching, light mechanical scabbling, blasting, grinding or degreasing.</p><p>P.R. Multi-Purpose Epoxy Resin System is applied to the prepared substrates by roller or brush, ensuring a continuous film. Avoid over-application and puddles. Porous substrates may require two coats.</p><p>MIXING – RATIO: PR-5C : PR-38 2 : 1</p><p>P.R. Multi-Purpose Epoxy Resin System is supplied in pre-weighed packs. Add all the contents of Curing Agent Component B to Epoxy Resin Component A and mix thoroughly, to maximise the working life, use from the pot quickly or transfer to a shallow tray to help dissipate the heat of the reaction </p><p>CLEANING</p><p>P.R. Tool Cleaning Solvent should be used to clean tools - do not use on hands. This solvent can also be used to further reduce the viscosity of the product as required, at a recommended level of between 5% - 7.5% max.</p><p>PACKAGING</p><p>Modified Epoxy Resin PR-5C – 25.0kg and 210.0kg nett wt drums. Curing Agent PR-38 – 25.0kg and 200.0kg nett wt drums.</p><p>STORAGE</p><p>Shelf life - >12 months. Storage temperature - 5°C - 35°C</p><p>HEALTH & SAFETY</p><p>It is recommended that barrier creams, gloves and protective clothing be used when working with P.R. Multi-Purpose Epoxy Resin System.</p><p>For full details see separate Health & Safety Data Sheet.</p><p>FORMULATOR OF EPOXY RESIN BASED PRODUCTS 2 FLOORING GROUTS COATINGS ADHESIVES etc.</p><p>VAT Reg No: 519 5418 33 REGISTERED IN ENGLAND No: 2230243 Directors: P. RAWAL. A. RAWAL. All P.R. Epoxy Systems products’ are manufactured to a high standard of quality. Whilst we aim to ensure that any advice, information or recommendations given are reliable and correct, the Company cannot accept any liability directly or indirectly arising from the use of its products, as we have no direct or continuous control over where or how its products are applied. No undertaking can be given against infringement of any patented processes.</p><p>FORMULATOR OF EPOXY RESIN BASED PRODUCTS 3 FLOORING GROUTS COATINGS ADHESIVES etc.</p><p>VAT Reg No: 519 5418 33 REGISTERED IN ENGLAND No: 2230243 Directors: P. RAWAL. A. RAWAL.</p>