<p> 2014 Oregon Plumbing Specialty Code Changes RV 3.3.16</p><p>PLEASE DO NOT BOOKMARK ANY ANYTIMECE WEBPAGES! Our system will remember the last page you viewed when logging out and back in but please DO NOT exit out when taking a test. Your place will NOT be saved. The 2014 UPC with Oregon Amendments will be provided for you. How to take this non-illustrated course: 1. Download and Print the test questions. 2. Login to your account with your ID and password. 3. Viewing your status page, scroll down and click on “Click here to start this course”. 4. Start viewing the code book. Refer to your printed test to find the correct answers. The questions track the code book. 5. As you find the answers, circle them on your printed copy. 6. At the end of each section, you’ll enter the quiz which is the same as your printed test. Refer to your circled answers when actually answering the quiz on the Web. 7. Upon passing, you will proceed to the next section. If you failed to pass, you will be moved back to the beginning of that section for more review.</p><p> Mobile users – Many current mobile devices are compatible with AnytimeCE and will probably work. If not, use a desktop or laptop computer to complete your course. Quiz 1 – Chapter 1 4. Statutes related to this code shall include 1. The purpose of this code is not to ______. any particular class that should be especially  Chapter 447 protected by its terms.  Chapter 455  create  Chapter 693  establish  all of the answers provided  designate  any of the answers provided 5. Statutes can be obtained ______.  none of the answers provided  A. through the BCD website  B. by email 2. ORS stands for ______.  C. by visiting your nearest Building Codes  Oregon Revised Statute Division office  Oregon Recent State  D. only A and B  Oregon Resistance Safety  E. only A and C  Oregon Repair Statute 6. ORS 455.060 provides state rulings on 3. OAR stands for ______. acceptable ______.  Oregon Alternative Rules  materials  Oregon Administrative Rules  designs  Oregon Authority Rules  methods of construction  Oregon Amendment Rules  all of the answers provided</p><p>1 2014 Oregon Plumbing Specialty Code Changes RV 3.3.16 7. The provisions of this code shall apply to the 13. Investigative fees shall be charged ______, relocation, replacement, addition to, according to the rates established by the or use of plumbing systems as provided in ______where the State of Oregon has ORS 447.020 and OAR 918-008-0000. jurisdiction.  erection  municipality  installation  state  alteration  either of the answers provided  repair  neither of the answers provided  any of the answers provided Quiz 2 – Chapter 2 8. The building official shall be the Authority 1. “Approved” means acceptable to ______. duly appointed to enforce this code which is  the general contractor known as the ______code section.  the home owner  Changes in Building Occupancy  the building official  Authority to Disconnect Utilities in  the bank Emergencies  Duties and Powers of the Building Official 2. Authority Having Jurisdiction is the  Application for Permit organization, office, or individual responsible for enforcing other requirements that are not 9. It shall be unlawful, and therefore in violation part of this code. of this code, for a person, firm, or  True corporation to erect, construct, enlarge,  False alter, repair, move, improve, remove, convert, demolish, equip, or use plumbing, 3. The Authority Having Jurisdiction shall be a or permit the same. ______.  True  federal authority  False  state authority  municipal authority 10. The building official is authorized to serve a  any of the answers provided notice of violation on the ______responsible  none of the answers provided for violation(s) of this code.  company 4. A group of plumbing fixtures consisting of a  business water closet, one, two, or three lavatories,  person and any combination of a bathtub, a  violations are not given out combination bath/shower, or a shower, and which may include a urinal or bidet and 11. Municipal authority to levy penalties is emergency floor drain(s), is known as a limited to violations of code application. ______.  True  half bathroom  False  bathroom group  public use bathroom 12. Manufacturer’s installation instructions shall  private use bathroom be available on the job site at the time of ______. 5. “Board” shall mean the State Plumbing  installation Board.  repair  True  inspection  False  testing</p><p>2 2014 Oregon Plumbing Specialty Code Changes RV 3.3.16 6. The building drain must extend ______from Quiz 3 – Chapter 3 the outside of the building wall to the 1. Plumbing systems shall be located above building sewer. the design flood elevation as determined by  2 feet the local governing authority.  3 feet  True  4 feet  False  5 feet  6 feet 2. Hangers and supports suspending pipe shall be supported at intervals not exceeding 7. The part of the drainage system piping that those shown in Table 3-2 with the exception conveys sewage into a septic tank, cesspool of ______. or other treatment unit, that begins five feet  larger piping outside the building or structure within which  smaller piping the sewage originates, is known as the  piping supported by the manufacturer’s ______. installation instructions  building sewer  none of the answers provided  street connection  disposal sewer line Quiz 4 – Chapter 4  waste and gray water line 1. Commercial food service pre-rinse spray valves shall have a maximum flow rate of 8. The elevation of the design flood relative to ______at ______. the datum specified by the Flood Plan  1.6 gpm – 60 psi Administrator is known as a/n ______.  2.0 gpm – 50 psi  design flood elevation  1.2 gpm – 80 psi  flood plain  9.0 gpm – 30 psi  overflow field  high water area 2. Commercial food service pre-rinse spray  none of the answers provided valves shall be equipped with an integral automatic shutoff. 9. The area designed as a flood hazard by the  True Flood Plain Administrator is known as a  False flood hazard area.  True 3. ______shall comply with the applicable  False standards referenced in Table 14-1.  Domestic dishwashing machines 10. Any area within the flood hazard area that is  Commercial dishwashing machines subject to high velocity wave action as  either of the answers provided determined by the Flood Plain Administrator  neither of the answers provided is known as a ______.  flooder 4. The water supply connection to a  drainage system commercial dishwashing machine shall be  flood hazard area subject to high velocity protected by a/n ______. wave action  air gap  flushometers valve  backflow prevention device  either of the answers provided 11. An insanitary condition is a ______that is  neither of the answers provided not supplied with water sufficient to flush and maintain the fixture or receptor in a clean condition.  plumbing fixture  waste discharging receptor  either of the answers provided  neither of the answers provided</p><p>3 2014 Oregon Plumbing Specialty Code Changes RV 3.3.16 5. Domestic dishwashing machines shall 12. Emergency eyewash equipment shall be discharge indirectly through an air gap fitting clearly marked. into a ______.  True  waste receptor  False  wye branch fitting on the tailpiece of a kitchen sink 13. A drain shall be required for emergency  dishwasher connection to a food waste eyewash or shower equipment. grinder  True  any of the answers provided  False  none of the answers provided Quiz 5 – Chapter 5 6. Commercial dishwashing machines shall 1. The regulations in this chapter shall govern discharge indirectly through an air gap with the construction, location, and installation of floor drain protection. ______fuel-burning water heaters.  True  instantaneous  False  outdoor  vented 7. Emergency eyewash and shower equipment  nonpotable shall comply with the building official requirements. 2. No water heater shall be hereinafter  True installed which does not comply with the  False type and model of each size when approved by the ______. 8. ______shall not be limited in the water  AHJ supply flow rates.  State Plumbing Board  Emergency eyewash  Building Official  Shower equipment  UPC  both of the answers provided  neither of the answers provided 3. Storage type water heaters regulated by this code ______potable water heaters 9. ______shall be included in ISEA Z358.1, designed to create hot water and shall be marked as a hazard when instantaneously on demand without the use supplying water to an emergency eyewash. of a storage tank.  Flow rate  replace  Discharge pattern  include  Temperature of flushing fluids  exclude  all of the answers provided  are  none of the answers provided 4. With a small buffer tank, potable water 10. Must eyewash and shower equipment be heating units are designed to create hot installed according to the manufacturer’s water instantaneously on demand without installation instructions? the use of a storage tank.  Yes  True  No  False</p><p>11. Emergency eyewash and shower equipment 5. When must a final water heater inspection shall be located on the ______from/as the be made by the building official? hazard, with accessibility for use by an  When the work authorized by the permit is immediate. installed.  next level  When the installation has been installed to  same level code.  bottom level  Prior to covering or concealing any of the  emergency equipment shall not be located work.  all of the answers provided</p><p>4 2014 Oregon Plumbing Specialty Code Changes RV 3.3.16 6. The maximum allowable lead in fittings and Quiz 6 – Chapter 6 pipe is ______. 1. Gray water systems shall be marked in  .05% accordance with this section with the words  .1% “CAUTION: NONPOTABLE GRAY WATER,  .15% DO NOT DRINK” in ______letters.  .2%  yellow  .25%  black  purple 7. A shut-off valve shall not be installed  red between ______and ______.  white  a water heater – a pressure relief valve  the expansion tank – the system 2. Reclaimed (recycled) water systems shall be  a drain – a vacuum relief valve marked with the words “CAUTION:  a water closet – a fullway valve NONPOTABLE RECLAIMED (RECYCLED) WATER, DO NOT DRINK” in ______letters. 8. Water filters, water softeners, and backflow  yellow prevention devices shall be tested and  black approved by the ______for flow rating and  purple pressure loss.  red  building official  white  State Plumbing Board  either of the answers provided 3. On-site treated water systems shall be  neither of the answers provided marked with the words “CAUTION: ON-SITE TREATED NONPOTABLE WATER, DO Quiz 7 – Chapter 7 NOT DRINK” in ______letters. 1. Pot sinks, scullery sinks, dishwashing sinks,  yellow and silverware sinks may be drained  black indirectly if provided with an approved air  purple gap no less than ______in size without the  red necessity of an adjacent floor drain.  white  1 inch  2 inches 4. Rainwater catchment systems shall be  3 inches marked with the words “CAUTION:  4 inches NONPOTABLE RAINWATER WATER, DO  5 inches NOT DRINK” in ______letters.  yellow 2. Cleanouts for drains that pass through a  black backwater valve shall be clearly identified  purple with ______, stating “backwater valve  red downstream.”  white  a label  a sign 5. For carbonated beverage dispensers, piping  markings material installed ______from the backflow  any of the answers provided preventer shall not be affected by carbon  none of the answers provided dioxide gas.  upstream  downstream  either of the answers provided  neither of the answers provided</p><p>5 2014 Oregon Plumbing Specialty Code Changes RV 3.3.16 3. Sumps and receiving tanks shall have 10. Are a dual pump and an oil water separator substantial covers with a bolt-and-gasket required for an elevator pit drain? type manhole that provides a minimum  Yes clearance of ______above the lid to allow  No access for inspection, repairs, and cleaning.  8 inches 11. Replacement of existing building storm  16 inches sewers using trenchless methodology and  24 inches materials shall be installed in accordance  30 inches with ______.  IAPMO IS-26 4. The developed length of the discharge pipe  ASTM F 1216 shall not exceed the length as stated in the  both of the answers provided manufacturer’s instructions.  neither of the answers provided  True  False Quiz 8 – Chapter 9 1. Water closets, bathtubs, showers and floor 5. Permanent means of drainage shall be drains within one-bathroom or two-bathroom provided for each elevator car. groups located on the same floor for ______ True shall be vented by a wet vent.  False  private use  public use 6. What is the smallest pump that can be  medical use installed for each elevator car?  storage  120 gpm  35 gpm Quiz 9 – Chapter 11  320 gpm 1. Roofs, paved areas, yards, courts,  50 gpm courtyards, vent shafts, and light wells shall  220 gpm be drained ______.  into a separate storm sewer system 7. A pump for an elevator car must have a  into a combined sewer system where a minimum size discharge pipe of ______. separate storm sewer system is not  1 inch available  2 inches  to some other place by approval from the  3 inches building official  4 inches  any of the answers provided  5 inches  none of the answers provided</p><p>8. A pump for an elevator car will need to have Quiz 10 – Chapter 13 a minimum receiving gravity drain of ______1. The altered, renovated, or modernized serving a branch connected through a trap. portion of an existing health care facility  1 inch system and/or its individual components,  2 inches shall be required to follow the installation  3 inches and equipment requirements of ______.  4 inches  Chapter 4  5 inches  Chapter 13  Chapter 9 9. A pump for an elevator car will need the  Chapter 16 receiving gravity drain to be sloped at ______per foot when serving a branch 2. The installation of medical gas and vacuum connected through a tap. piping systems shall follow the requirements  1/2 inch of this chapter, the appropriate standards, or  1/4 inch both, adopted in this code by the State Plumbing Board.  1/8 inch  True  1/16 inch</p><p>6 2014 Oregon Plumbing Specialty Code Changes RV 3.3.16</p><p> False 10. A medical gas system is an assembly of 3. Where the terms “medical gas” or “vacuum” equipment and piping for the distribution of occur, the provisions shall apply to the nonflammable medical gases such as piping system for ______, and mixtures oxygen, nitrous oxide, compressed air, thereof. carbon dioxide, and helium.  nitrogen  True  instrument air  False  medical air  helium 11. A room in a health care facility where  all of the answers provided patients are examined or treated is known as a ______. 4. Critical care rooms are typically those where  critical care room patients are ______.  patient care room  subjected to invasive procedures  general care room  connected to line-operated appliances  health care facility room  connected to patient care-related appliances  all of the answers provided 12. Vacuum systems are defined as ______.  none of the answers provided  Category 1  Category 2 5. Special care patient rooms shall be used for  Category 3 ______.  Category 4  critical care  intensive care 13. Piped vacuum systems are defined as  special care ______.  all of the answers provided  Category 1  Category 2 6. General care rooms are defined as ______.  Category 3  inpatient bedrooms  Category 4  dialysis rooms  in vitro fertilization rooms 14. Compressed air systems are defined as  procedural rooms ______.  all of the answers provided  Category 1  Category 2 7. Medical air is supplied from ______.  Category 3  cylinders  Category 4  bulk containers  medical air compressors 15. Facility systems in which failure of  any of the answers provided equipment or systems is likely to cause injury or death of patients or caregivers,  none of the answers provided shall be designed to meet the system requirements of ______. 8. Can medical air be reconstituted from oxygen USP and oil-free, dry nitrogen NF?  Category 1  Yes  Category 2  No  Category 3  Category 4 9. Medical gas is defined as a ______.  patient medical gas  medical support gas  either of the answers provided  neither of the answers provided</p><p>7 2014 Oregon Plumbing Specialty Code Changes RV 3.3.16 16. Facility systems in which failure of 3. When underground piping is installed, equipment or systems is likely to cause backfill needs to be ______. minor injury to patients or caregivers, shall  clean be designed to meet the system  free of materials that can damage the pipes requirements of ______.  compacted  Category 1  all of the answers provided  Category 2  none of the answers provided  Category 3  Category 4 4. Supports for copper pipe shall be the correct size, and shall have a copper finish. 17. Facility systems in which failure of  True equipment or systems is not likely to cause  False injury to patients or caregivers, but can cause patient discomfort, shall be designed 5. Copper tube supports located in damp to meet the system requirements of ______. locations shall be plastic-coated or ______ Category 1 in order to not absorb moisture.  Category 2  painted  Category 3  electrically insulated  Category 4  covered  replaced 18. Facility systems in which failure of equipment or systems would have no impact 6. When brazing, a tube end can be inserted on patient care, shall be designed to meet ______into a socket that is not less than the the system requirements of ______. minimum cup depth.  Category 1  fully  Category 2  to a mechanically limited depth  Category 3  either of the answers provided  Category 4  neither of the answers provided</p><p>Quiz 11 – Chapter 13 7. When installed, station outlets and inlets 1. Materials used in a central supply system shall comply with the manufacturer’s shall be intended to handle oxygen or installation instructions. nitrous oxide at a pressure of less than  True ______.  False  200 psi  250 psi 8. Critical branch circuits for medical gas  300 psi systems need protection for ______.  350 psi  conduits  400 psi  wires  cable trays 2. Soldered joints in ______gas-powered  raceways systems piping shall use a lead-free solder  all of the answers provided filler for metal containing no more than 0.2 percent lead. 9. Medical gas systems shall include  Category 1 communication devices that do not use  Category 2 electrical wiring for signal transmission.  Category 3  True  Category 4  False</p><p>8 2014 Oregon Plumbing Specialty Code Changes RV 3.3.16</p><p>10. If a communication device that does not use  E. answers A, B, and C electrical wiring for signal transmission is installed for a medical gas system, does the 15. If contamination occurs, medical air system need to be supervised? compressor systems shall consist of  No – because the communication device materials and devices used between the would never fail. medical air intake and the air source valve.  Yes – but only on Mondays.  True  No – because the Tin Can Telephone will  False never run out of minutes.  Yes – because the communication could fail, 16. For medical-surgical vacuum sources, piping which would sound an alarm. between the vacuum pump(s), discharge(s), receiver(s), and the vacuum source shut-off 11. A medical gas system shall allow the valve shall follow the requirements of installation and removal of alarm switches ______. and sensors.  Section 1303.5  True  Section 1326.1  False  Section 1316.4  Section 1318.10 12. Medical air compressor systems consist of ______. 17. Piping between vacuum pumps, discharges,  regulators receivers, and the vacuum main line valve  filters shall follow the requirements of ______.  dryers  Section 1303.5  local alarms  Section 1326.1  all of the answers provided  Section 1316.4  Section 1318.10 13. In the event of a single fault failure, medical air compressor components need to 18. Medical gas supply systems shall comply ______. with the requirements of Category 2 gas  permit service systems.  continuously supply medical air  True  both of the answers provided  False  neither of the answers provided 19. Category 3 piped gas systems of ______14. Medical air compressor component shall be cylinder systems or air compressor arrangements shall be permitted to ______. systems that include filters, receivers,  A. vary with the technology(s) employed dryers, regulators, relief valves, and  B. provide an equal level of operating indicators. redundancy  compressed air  C. maintain medical air quality  nitrogen  D. only A and C  either of the answers provided  neither of the answers provided</p><p>9</p>