<p>Pain Management Clinic Procedure Suite Surgical Pendant </p><p>CSU Light Load Arm System; Arm Length 500+500 with Media Column 1000 </p><p>- Arm length measured from axle bearing to axle bearing </p><p>- To be able to retrofit the arm system in the future, at the end of the arms are easily removable endcaps </p><p>- For reasons of operating safety and –friendlyness is the armsystem equipped with extremely smooth ball bearings and a combination brake. The combination brake prevents the unintended runaway of a support arm during a breakdown of the pneumatic brake and ensure the safe continued operation of the service supply unit </p><p>- The braking system includes a color control concept for intuitive operation without the use of pictograms </p><p>- Arm system with two 500mm by 500 mm horizontal swivel arms, intermediate bearing and ceiling bearing</p><p>- Action radius 1000 mm </p><p>- Load capacity on media column min. 120 kg</p><p>- Height of media column 500mm in length - - Double braking system, consisting of friction brake and pneumatic brake In case of pressure drop / pressure failure, the arm system remains in it’s previously adjusted position</p><p>Media Column</p><p>- Height of media column 1000 mm - Fitting of installation components possible on 3 sides - Pivot bearing integrated into media column - Double braking system in the pivot bearing, consisting of fictionbrake and pneumatic brake - Swivel range 330° - Adaptation to ceiling height via distance tube attached to arm system - Mounting system for attachment of workstation components, e.g. shelves, drawers, side arms, equipment holders from front side - Working height of workstation components infinitely variable - Set control elements, consisting of 2 handles for comfortable operation of the supply unit - Ergonomically designed handles to support the user posi-tioning the system - Color coding of control elements adapted to other supply unit components (e.g. joints, keypads) allowing for intuitive operation - Mounting at any front plate of media column is possible - Control element, consisting of 2 handles, mounted at front rail system of media column, for comfortable operation of the supply unit - Positioning in front of patient’s infusion equipment via integrated extension unit - Ergonomically designed handles to support the user positioning the system - Control of arm system’s pneumatic brakes via integrated push buttons</p><p>- One-piece front plates without gaps </p><p>- Surfaces resistant against disinfectants </p><p>- Color of media column: anodized aluminium </p><p>- Color of media column RAL 9002</p><p>- Color of front plates: anodized aluminium </p><p>- Smooth, disinfectant-resistant surfaces </p><p>- Integrated front plates without gaps. </p><p>- Different color shades of the component plates in RAL</p><p>- Number of component spaces</p><p>- Two parallel front rails for easy adaptation and installation from consoles, drawers, beams or equipment cher without use of new sealing elements </p><p>Installation Components</p><p>Gas Fittings </p><p>Media column equipped with:</p><p>__1__ x O2 (oxygen)</p><p>__1__ x Air 5 (compressed air 5 bar)</p><p>__2__ x VAC (vacuum)</p><p>__1__ x AGSS (Anesthesia Gas Scavenging System)</p><p>High voltage electrical installation </p><p>Media column equipped with: </p><p>__10__ x electrical socket</p><p>__2__ x data points</p><p>Number of electrical circuits: ___10____ </p><p>Low voltage electrical installation </p><p>Media column equipped with: - follow OT17</p><p>__2__ x telephone socket TAE 6F __5__ x EDP socket RJ 45</p><p>__1__ x nurse call (material supplied by customer)</p><p>3.2 Workstation Components</p><p>3.5.7 Shelf for mounting at front rail system of Media Column</p><p>Shelf for attachment to front rail system of previously described media column</p><p>- Surface area 440 x 340 mm (W x D)</p><p>- Load capacity min. 40 kg</p><p>- Thickness max. 22 mm</p><p>- Material: Aluminium</p><p>- Smooth, scratchproof, fade-resistant and antistatic surface </p><p>- No sharp edges and grooves </p><p>- Integrated rubber elements at all 4 edges for injury prevention </p><p>- Additional standard rails (25x10 mm) at left and right hand side </p><p>- Load capacity of each standard rail min. 10 kg</p><p>Drawer for mounting at shelf</p><p>Drawer for attachment to shelf, as previously described in item no. 3.5.7 </p><p>- Dimensions 440 x 340 x 170 mm (W x D x H) - Load capacity min. 5 kg - - Dimensions 640 x 340 x 170 mm (W x D x H) - Load capacity min. 7 kg</p><p>Special drawer runner system with - exceptionally smooth sliding function </p><p>- self-closing function </p><p>Facilitated cleaning by - easy removal capability of complete drawer </p><p>- removable front fascia </p><p>- smooth surfaces without protruding handles CVP-Pole</p><p>- Support tube with height adjustable extension pole </p><p>- Length of support tube min. 1000 mm</p><p>- Length of extension pole min. 800 mm</p><p>- 4 hooks, cross orientation, for accommodation of infusion bottles</p><p>( ) ( )</p><p>Pre-installation components</p><p>Ceiling fixture set anchor / bolt mounting for ceiling supply unit</p><p>- adaptable on site to height of false ceiling, min. length 1200 mm</p><p>- containing all necessary fixation components, e.g. sub-ceiling flange, distance tubes, reinforcement set, inter-connecting flange</p><p>Ceiling fixture set anchor / bolt mounting for ceiling supply unit</p><p>- for direct fixation to concrete ceiling </p><p>- containing all necessary fixation components, e.g. sub-ceiling flange, reinforcement set, inter-connecting flange</p>