<p>Application Steps</p><p>Necessary tools</p><p>Wall preparation</p><p> The wall must be clean (no dust, dirt or grease), dry, even and primed</p><p> Temperature should not be below 8°C </p><p>Wall covering application </p><p> v</p><p>1. Fill the application machine with clean water</p><p>2. Pull the wall covering through the machine and cut one strip of wall covering according to the room height +10 cm Do not leave the wall covering in the water. Cut off and do not use any strip that stays in the water before preparing the next strip</p><p> v</p><p>3. Place the wallcovering strip on the wall vertically immediately after pulling it through water Do not wait more than10 min before applying the product</p><p>4. Smooth it with spatula or clean roller</p><p> v</p><p>5. Place the adjacent strip edge to edge</p><p>6. Repeat the points 1, 2, 3, 4 and 5 with other strips until you have finished the room</p><p>7. Cut off any surplus with a knife</p><p>8. Apply a first layer of acrylic paint (250 g / m2, +/-10 %) when the product is dry (~1 day) </p>