<p>Audacity Instructions</p><p>Once the HypnoCom has been connected to the laptop/computer as per the instructions above:</p><p>Audacity® is free, open source software for recording and editing sounds, it can be downloaded from the following link http://audacity.sourceforge.net/</p><p>Once you have downloaded and installed Audacity (follow installation instructions), open the program from Start – all programs – Audacity (windows)</p><p>When you open Audacity for the first time, you are presented with the following help options (there are very clear instructions online for the more advanced features available within Audacity)</p><p>Select Ok to continue Working with Audacity is extremely easy.</p><p>** you must adjust the microphone in volume within Audacity whilst working with a HypnoCom**, this can be adjusted to your personal preference, I reduce the volume coming into Audacity and then adjust via the volume control option for the microphone on the hypnoCom</p><p>To make a recording with Audacity and Hypnocom</p><p>Switch on HypnoCom, start background music playing via Windows Media Player (or preferred music software, ITunes, VLC...)</p><p>Press the record option in Audacity (Red Circular button)</p><p>You can pause/play or stop the recording with these buttons.</p><p>Once you have finished the recording – press Stop (Square Yellow button) Saving the Recording:</p><p>There are different options for saving the recording in Audacity – these depend on the next steps you wish to take with the recording:</p><p> Work on the recording later</p><p> Burn to CD</p><p>Work on recording later</p><p>Stop the recording</p><p>Select File – Save Project AS – you will receive the notification below - (select file name)</p><p>When you continue with these options, you can open the .aup file again in Audacity to edit </p><p>Burn to CD</p><p>Once you have completed the recording and you want to Save it so you can then burn it to CD, select File – Export – Then name the file as you would like it saved (from here, you can save the file as MP3,WAV,WMA..etc)</p><p>Once you have saved the file, you can use CD burning software(Nero, NTI Backup, Windows Media player....) to burn the completed file to CD </p>