<p> ALI IMRAN Mob No: +91-7042385156</p><p>E-mail ID: [email protected] </p><p>Assignments in Project Management in Pipeline, Oil & Gas and power plant Sector with a high growth oriented organisation.</p><p>Professional Summary</p><p> Around 6+ years of experience in 600MW Power Plant project, Pipeline Project in CGD and Refinery Sector.</p><p> Proficient in executing Piping Fabrication & Construction Projects.</p><p> Capable of achieving timely project completion and business growth objectives. </p><p> Expertise in using planning tools like Primavera P6, Primavera Risk Analysis, and MS Project.</p><p> Capacity to plan, schedule, coordinate and control multiple projects. </p><p> Fully experienced in managing design engineering operations involving design & development, developing detailed drawing for fabrication and co-ordination with internal departments.</p><p> An effective communicator with good relationship management & analytical skills.</p><p>Career Highlights</p><p>1- Present Organization : Asyad International Co Ltd</p><p>Duration : Dec’12 to Feb’15</p><p>Current Location : Saudi Arabia </p><p>2- Previous Organization : Moody International (I) Pvt Ltd.</p><p>Duration : March’11 to Oct’12</p><p>Location : Delhi (India)</p><p>3- Organization : TUV – SUD (South Asia ) </p><p>Duration : Oct 12 to Dec 12 </p><p>Location : Delhi (India)</p><p>4- Organization : Golden Edge Engineering Pvt Ltd.</p><p>Duration : Aug 09 To Feb 11</p><p>Location : Uther Perdash Projects</p><p>1- Client : Saudi Aramco</p><p>Project : AL HASA Pipeline Project Duration : Jan ’14 to Feb’15.</p><p>Location : Saudi Arabia (AL- Hasa)</p><p>Role : Project In Charge</p><p>2- Client : Saudi Aramco (Jeddah Refinery)</p><p>Project : Replacement Utilities Control System, (4 Boilers and 4 Compressor Areas). Duration : Dec’12 to Jan’14</p><p>Location : Saudi Arabia (Jeddah Refinery)</p><p>Role : Mechanical Lead Engineer</p><p>3- Client : Indraprastha Gas Limited</p><p>Project : Natural Gas (NG) NCT Project Phase–II Duration : March’11 to Oct’12 </p><p>Location : New Delhi</p><p>Role : TPI</p><p>4- Client : Indraprastha Gas Limited ( TUV- SUD )</p><p>Project : Natural Gas (NG) NCT Project Phase–II Duration : Oct’12 to Dec 12</p><p>Location : New Delhi</p><p>Role : TPI</p><p>5- Client : Lanco Power Plant (Boiler part)</p><p>Project : 2 X 600 MW Thermal Power Project Location : Anpara (UP)</p><p>Role : Mechanical Site Engineer Over all Job Responsibility </p><p>OVERSIES RESPONSIBILITY</p><p> Handling piping fabrication, trenching/erection, stringing, welding, hydro-testing & box- up of piping systems.</p><p> Performing erection & alignment of Boiler Drum, Duct, Eco Flu Duct, Main Header Line, Fuel Gas Supply Line, Fuel Ignition line, and Fuel Oil Line.</p><p> I am familiar with Saudi Aramco Standard & Codes and International Code (API, ASME, and ASTM).</p><p> Preparing Tie-In Packages, Test Packages, Hydro Test Diagram and P&ID Test Limits Mark- Up.</p><p> Managing quality control functions as well as inspection and testing.</p><p> Reviewing work method statements and procedures. </p><p> Inspecting material before erecting the line and initial stage of welding.</p><p> Conducing on job inspection of site activities. </p><p> Drafting weekly and monthly progress reports.</p><p> Implementing PT, UT and RT test Inspection</p><p> Efficiently handling the pre-commissioning and flushing activities</p><p> Assessing Hydro Test Package to verify the completion of NDT (RT, UT, PT, PWHT, PMI and Hardness test) requirements.</p><p> Accurately defining quality systems, procedures & work schedules </p><p> Executing Quality Control Measures through – Acceptance Sampling, Vendor Quality Rating (VQR) and Quality Audit</p><p> Effetutating the calibration and validation activities </p><p> Carrying out checks on the test observations and raw data of of all the QC Operations </p><p>IGL Project (CGD) RESPONSIBILITY</p><p>Preliminary Route Survey.  (With the help of approved drawing)</p><p>Trenching.  Trial pit before excavation and route marking.</p><p> Proper Barricading, signboards and availability of first aid kit should be observed.</p><p>Mulling.  Distance between two pits is not more than 8mtrs.</p><p> Depth should be maintain.</p><p>HDD crossing  (Road, River, Nallah).</p><p> Machine should be calibrated.</p><p> Proposed drawing should be done.</p><p> Rimmer should be done before pipe pulling.</p><p> Marking should be done. Electro fusion joint  Qualified and approved welder wearing the original ID-Card only can perform the Electro fusion jointing. </p><p> Calibrated bar coded EF Control Unit must be used and manual entry may be possible.</p><p> EF fittings must be used only from the approved manufacturer of GSPC along with proper packing.</p><p> The contractor must have and use alignment clamp, re rounded tool.</p><p> Before scrapping, welder must mark the size of the EF fitting on both ends of the pipe with indelible marker pen.</p><p> Stone free soil should be filling for padding.</p><p>Warning Mate  Laying of warning mate should be done at 0.5mtr depth of the trench. </p><p>Backfilling.  Backfilling of the entire trench should be done with the balance soil.</p><p>Testing.  As laid PE network drawing must be clearly marked with pressurized, venting and flushing points.</p><p> Insure calibrated guage are used.</p><p> Prior to holding the pressure in the network, ensure water particles or debris are flushed out completely.</p><p>Valve chamber and final clean up.  Valve chamber should be constructed according the guideline of GSPC tender book.</p><p> Material should be used in proper manner according tender book of GSPC.</p><p> Charging of network.</p><p> As built should be checked by the TPI/PMC.</p><p> Checked and ensure Penumatic test report.</p><p> Ensure availability of additional squeeze tools for emergency</p><p> The gas should be vented continuously by crack opening of valve until reading confirm a concentration of gas by methane detector.</p><p> Line/ equipment/ installation/ work area/ inspected.</p><p> Surrounding area checked.</p><p> Portable fire extinguisher provided.</p><p> Area / cordoned off and caution boards / tags provided.</p><p>Paper work: --  Measurement of lowering pipe with Offset, Built up, Mulling, Normal surface.</p><p> Preparation and verification of laying graph.</p><p> Verification and certification of as built.</p><p> Test certificate reviewing of all consumed material.</p><p> Verification of Bill. Highlights </p><p>At Asyad International Co. Ltd</p><p>Attained Appreciation from Saudi Aramco.</p><p> Successfully Complete Hydro Test of 4 Boilers in Jeddah Refinery.</p><p> Successfully complete the 210 Tie-In’s joints of 4 Boilers Area in Jeddah Refinery.</p><p>Academics</p><p>Degree University Institute Session Class B.E. (Mechanical) Magdh MACET, Patna, Bihar 2004/2008 First Class</p><p>Certifications</p><p> Pursuing Project Management Professional (PMP)</p><p> Certified “Professional in Project Planning & Management (PPM)” from CADD Center (Primavera P6V7)</p><p> Ms Project</p><p> Cost Control management.</p><p> Piping Design and Detail Engineering.</p><p> Certified NDT Level II</p><p>IT Skills</p><p> Tools : Primavera, MS Project, Auto CAD, SAP – MM, MS OFFICE.</p><p>Personal Details</p><p> Date of Birth : 14th -January -1987</p><p> Marital Status : Unmarried </p><p> Pass Port No : K5443760.</p><p>References</p><p>Place : New Delhi</p><p>(ALI IMRAN) </p>