Safety Data Sheet Jinsen

SAFETY DATA SHEET JINSENPRODUCT NAME: ECR-288S PAGE 1 REVISION: Dec.13, 20061 CHEMICAL PRODUCT AND COMPANY IDENTIFICATIONIDENTIFICATION OF THE PRODUCT: ECR288SCHEMICAL FAMILY: Aliphatic hydrocarbon resinPRODUCT DESCRIPTION: Pale yellow to amber solid prills or flakes SUPPLIER: Shanghai Jinsen Hydrocarbon Resins Co., Ltd. 3rd floor,Industial & Commercial Building 568, Weiling Road,Jinshanwei, Shanghai, China (201511) Telephone: 0086-21-67242020 Facsimile: 0086-21-67242266EMERGENCY TELEPHONE NUMBER: Working day(From Mon. to Fri.)0086-21-57943800*331190086-13918204828 0086-13801948250Others:0086-13918204828 0086-13801948250This MSDS has been printed in the English language and meets the EU safety Date sheet requirements for this product. No country specific information is included.2 COMPOSITION/INFORMATION ON INGREDIENTSHEALTH HAZARDOUS COMPONENTS: NONE3 HAZARDS IDENTIFICATIONINVIRONMENTAL HAZARDS  In the environment, this substance and / or its components are expected to remain on the water and soil surface and persist.PHYSICAL AND CHEMICAL HAZARDS / FIRE AND EXPLOSION HAZARDS  Low hazard. Material can form flammable mixtures or can burn only upon heating to temperatures at or above the flash point.  Decomposes. Flammable / toxic gases will form upon decomposition. See Section 10 “STABILITY AND REACTIVITY”.  Toxic gases will form upon combustion. See Section 5 “FIRE-FIGHTING MEASURES”.  Dust. Material in form of dust is subject to explosions.PRINT DATE: 18-6-1 Page 1 of 7 SAFETY DATA SHEET JINSENPRODUCT NAME: ECR-288S PAGE 2 REVISION: Dec.13, 2006 Static Discharge. Product can accumulate static charges which can cause an incendiary electrical discharge4 FIRST AID MEASURESINHALATION:  In case of adverse exposure to vapours and /or aerosols formed at elevated temperatures, immediately remove the affected victim from exposure. Administer artificial respiration if breathing is stopped. Keep at rest. Call for prompt medical attention. SKIN CONTACT:  Flush with large amounts of water; use soap if available.  For hot product; immediately immerse in or flush the affected area with large amounts of cold water to dissipate heat. Cover with clean cotton sheeting or gauze and get prompt medical attention. No attempt should be made to remove material from skin or to remove contaminated clothing, as the damaged flesh can be easily torn. EYE CONTACT:  Flush eyes with large amounts of water until irritation subsides. If irritation persists, get medical attention. INGESTION:  First aid is normally not required.5 FIRE- FIGHTING MEASURESFIRE FIGHTING PROCEDURES:  Use water spray to cool fire exposed surfaces and to protect personnel. Block the supply to the fire.  Use foam, dry chemical, or water spray to extinguish fire. SPECIAL FIRE PRECAUTIONS:  Respiratory and eye protection required for fire fighting personnel.  Avoid spraying water directly into storage containers due to danger of boilover.  See also Section 4 “FIRST AID MEASURES” as well as Section 10 “STABILITY AND REACTIVITY”.HASARDOUS COMBUSTION PRODUCTS: None, beside those normally expected from hydrocarbon fires. 6 ACCIDENTAL RELEASE MEASURESLAND SPILL:  Sweep up spilled material and place in suitable containers for recycle or disposal.  Consult an expert on disposal of recovered material and ensure conformity to local disposal regulations.  See Section 4 “FIRST AID MEASURES” as well as Section 10 “STABILITY AND REACTIVITY”.WATER SPILL:  Stop source if possible to do so without hazard. Advise authorities of possible floating substances, if material enters watercourses or sewers. Confine if possible.  Skim from surface.PRINT DATE: 18-6-1 Page 2 of 7 SAFETY DATA SHEET JINSENPRODUCT NAME: ECR-288S PAGE 3 REVISION: Dec.13, 2006 Consult an expert on disposal of any recovered material and ensure conformity to local disposal regulations.  See also Section 4 “FIRST AID MEASURES” and Section 10 “STABILITY AND REACTIVITY”.7 HANDLING AND STORAGESTORAGE TEMPERATURE (DegC) : Ambient TRANSPORT TEMPERATURE (DegC) : Ambient LOADING / UNLOADING TEMPERATURE (DegC) : Ambient VISCOSITY (cSt) : Not Applicable STRAGE / TRANSPORT PRESSURE (kpa) : Atmospheric ELECTROSTATIC ACCUMULATION HAZARD? Yes, use proper grounding procedureUSUAL SHIPPING CONTAINERS: 25 kg bags MATERIALS AND COATINGS SUITABLE : Paper Steel Polyethylene Polypropylene STORAGE / HANDLING, GENERAL NOTES  DO NOT handle, store or open near an open flame, sources of heat or sources of ignition. Protect material from direct sunlight.  Material will accumulate static charges which may cause an electrical spark (ignition source). Use proper bonding and / or grounding procedures.  DO NOT stack pallets of bagged material. The product may be dimensionally unstable under certain conditions (temperature, sunlight).8 EXPOSURE CONTROLS /PERSONAL PROTECTIONENGINEERING CONTROL MEASURES / VENTILATION Local exhaust ventilation of process equipment may be needed to control exposures to below the recommended threshold exposure limit.OCCUPATIONAL EXPOSURE LIMITSThis product contains material which, when handled under certain conditions (open heating and /or mechanical shear), the following component(s) with a recognised or recommended OEL value may be released:Particulates (dust); TWA: 10 mg /m3, for inhalable particulates not otherwise classified, ACGIH (1999).Particulates (dust);PRINT DATE: 18-6-1 Page 3 of 7 SAFETY DATA SHEET JINSENPRODUCT NAME: ECR-288S PAGE 4 REVISION: Dec.13, 2006TWA: 3 mg/m3, for respirable particulates not otherwise classified, ACGIH (1999).PERSONAL PROTECTIONGENERAL ADVICE The use and choice of Personal Protection equipment is related to the hazard of the product, the workplace, and the way the product is handled. In general, we recommend as a minimum safety precaution that safety glasses with side-shields and workclothes protecting arms, legs and body be used. In addition, any person visiting an area where this product is handled or processed should at least wear safety glasses with side-shields.SPECIAL ADVICE Based on and limited to Shanghai Jinsen Hydrocarbon Resins Co., Ltd.’s experience of this product as such, the following special advice is believed to provide satisfactory protection for the industrial user or handler. RESPIRATORY PROTECTION Where concentrations in air may exceed the limits given in this section, it is recommended to use a nuisance dust mask to protect from overexposure by inhalation.HAND PROTECTION When handling this product, it is recommended to wear chemical resistant gloves, using inner gloves for thermal protection of required. The choice of suitable protective gloves depends on work conditions and what chemicals are handled. Please contact Jinsen for advice on what type of glove material may be suitable. Gloves should be replaced immediately if sign of degradation is observed.EYE PROTECTION When handling this product hot, it is recommended to wear safety glasses and preferably a face shield to protect from splashes of hot material.SKIN /BODY PROTECTION When handling this product hot, it is recommended to protect arms and body from splashes of hot material.9 PHYSICAL AND CHEMICAL PROPERTIESThese are indicative values only. Please refer also to the product specification sheet.PHYSICAL STATE: Solid FROM /COLOUR: Pale yellow to amber solid prills or flakes. ODOR:PH ( ) ( DegC): Not Applicable FREEZ. /MELT / POINT: Between 95.00 and 105.00 DegC Softening Point BOILING POINT RANGE: DegC Not AvailablePRINT DATE: 18-6-1 Page 4 of 7 SAFETY DATA SHEET JINSENPRODUCT NAME: ECR-288S PAGE 5 REVISION: Dec.13, 2006FLASHPOINT (COC ASTM D92): > 221 DegC Cleveland Open Cup AUTOIGNITION TEMPERATURE: DegC Not Available EXPLOSIVE LIMITS (in air): Vol% Not Available VAPOR PRESSURE ( DegC): Kpa Not Applicable DENSITY g /cm3 SPECIFIC GRAVITY (18.0 / 18.0): 0.97 VAPOR DENSITY ( 101.3 kpa /air =1): Not Applicable SOLUBILITY IN WATER ( DegC): Wt% Negligible IS MATERIAL HYGROSCOPIC: No VISCOSITY cst Not Available EVAPORATION RATE (n-Bu Acetate= 1) Not Applicable COEFF. OF THERMAL EXPANSION ( Liq.): DegC Not Applicable MOLECULAR WEIGHT: 1,200 Average10 STABILITY AND REACTIVITYHAZARDOUS POLYMERIZATION ? No CONDITIONS TO AVOID POLYMERIZATION: Not ApplicableSTABILITY: Stable CONDITIONS TO AVIOD INSTABILITY: Not ApplicableMATERIALS AND CONDITIONS TO AVOID (INCOMPATIBILITY): Stong oxidizing agents, high temperatures.HAZARDOUS DECOMPOSITION PRODUCTS: None, beside those normally expected from hydrocarbons.11 TOXICOLOGICAL INFORMATIONACUTE: INHALATION:  Negligible hazard at ambient temperature (-18 to 38 Deg C).  Dust may be irritating to eyes and respiratory tract.  Vapors and /or aerosols which may be formed at elevated temperatures may be irritating to eyes and respiratory tract. SKIN CONTACT:  Low order of toxicity.  Frequent or prolonged contact may cause mild skin discomfort.  Exposure to hot material may cause thermal burns and adhesion of the solidified product to the skin. EYE CONTACT:PRINT DATE: 18-6-1 Page 5 of 7 SAFETY DATA SHEET JINSENPRODUCT NAME: ECR-288S PAGE 6 REVISION: Dec.13, 2006 Will cause eye discomfort, but will not injure eye tissue. INGESTION:  Minimal toxicity.Additional information is available on special request12 ECOLOGICAL INFORMATIONENVIRONMENTAL MOBILITY This substance is a polymer, is insoluble in water, and floats.ENVIRONMENTAL GEGRADABILITY This substance is expected to persist.ECOTOXICITY AND BIOACCUMULATION No acute toxicity to aquatic organisms is expected due to its low solubility in water.13 DISPOSAL CONSIDERATIONSThe following advice only applies to the product as supplied. Combination with other materials may well indicate another route of disposal. If in doubt, contact Jinsen or local Authorities. Empty drums should be taken for recycling, recovery or disposal through a suitably qualified or licensed contractor. Care should in any case be taken to ensure compliance with national and local regulations.This product is suitable for disposal in an approved landfill or by controlled incineration.14 TRANSPORT INFORMATIONLAND This product is not regulated for road /rail transport.SEA – IMDG (PACKAGED GOODS AND BLCS) This product is not regulated for sea transport.AIR (ICAO / IATA) This product is not regulated for air transport.15 RRGULATORY INFORMATIONPRINT DATE: 18-6-1 Page 6 of 7 SAFETY DATA SHEET JINSENPRODUCT NAME: ECR-288S PAGE 7 REVISION: Dec.13, 2006CLASSIFICATION AND LABELLING ACCORDING TO EUROPEAN DIRECTIVES CLASSIFICATION / SYMBOL: Not Regulated GOVERNING DIRECTIVE: According to the EC Directives, the product does not require classification and labelling.16 OTHER INFORMATIONREVISION SUMMARY: Since 12 August 1999, this MSDS has been revised in Section(s): 8THIS INFORMATION RELATES ONLY TO THE SPECIFIC MATERIAL DESIGNATED AND MAY NOT BE VALID FOR SUCH MATERIAL USED IN COMBINATION WITH ANY OTHER MATERIALS OR IN ANY PROCESS. SUCH INFORMATION IS TO THE BEST OF SHANGHAI JINSEN HYDROCARBON RESINS CO., LTD.’S KNOWLEDGE AND BELIEVED ACCURATE AND RELIABLE AS OF THE DATE INDICATED. HOWEVER, NO REPRESENTATION, WARRANTY OR GUARANTEE IS MADE AS TO ITS ACCURACY, RELIABILITY OR COMPLETENESS. IT IS THE USER’S RESPONSIBILITY TO SATISFY HIMSELF AS TO THE SUITABILITY AND COMPLETENESS OF SUCH INFORMATION FOR HIS OWN PARTICULAR USE. PRINT DATE: 18-6-1 Page 7 of 7

Safety Data Sheet Jinsen

Details

Download

Copyright

We respect the copyrights and intellectual property rights of all users. All uploaded documents are either original works of the uploader or authorized works of the rightful owners.

Support