<p>3123A AQURON® 1000 CURING & CONCRETE TREATMENT</p><p>1. GENERAL</p><p>This section relates to AQURON® Concrete Treatments to form an internal hydrogel within the concrete providing curing, surface hardening, anti-dusting, sheen enhancement for new concrete floors that will be left "EXPOSED" as the final finish.</p><p>1.1 RELATED WORK Refer to ~ for ~</p><p>Documents</p><p>1.2 DOCUMENTS Refer to the general section 1233 REFERENCED DOCUMENTS. The following documents are specifically referred to in this section: ASTM C309 Standard specification for Liquid Membrane-Forming Compounds for Curing Concrete</p><p>1.3 MANUFACTURER/SUPPLIER DOCUMENTS Manufacturer's and supplier's documents relating to this part of the work: AQURON® products MSD sheets AQURON® products technical data</p><p>Manufacturer/supplier contact details Company: Markham Global</p><p>Email: [email protected] NZ: 0800 693 694 (++646 8422248) www.markhamglobal.com AUSTRALIA 1800 693 694 (++6174153 6286) www.markhamglobal.com.au</p><p>Warranties</p><p>1.4 WARRANTIES Warrant this work under normal environmental and use conditions against failure. Warranty period is subject to confirmation of project and due compliance by related trades where applicable.</p><p>Refer to the general section 1237 WARRANTIES for details of when completed warranties must be submitted.</p><p>Requirements</p><p>1.5 QUALIFICATIONS Application to be carried out by an AQURON® approved applicator strictly in accordance with manufacturer's recommendations. For approved applicators contact:</p><p>Markham Global. Refer to MANUFACTURER/SUPPLIER DOCUMENTS for contact details.</p><p>1.6 NO SUBSTITUTIONS Substitutions are not permitted to any specified AQURON® products or associated components.</p><p>2. PRODUCTS</p><p>Materials</p><p>201310 – Web Version – AQURON 1000 for New Concrete 3123A Page 1 2.1 CURING AND CONCRETE TREATMENT AQURON®1000™curing and concrete treatment complies to moisture retention requirements of ASTM C309, a deep penetrating, non toxic waterborne solution which forms an insoluble calcium silicate gel within the concrete matrix. Tested to have nil crystalline silica.</p><p>3. EXECUTION</p><p>Conditions</p><p>3.1 TECHNIQUE DISCUSSION Before application, arrange a meeting to confirm the application timing and procedure.</p><p>Application</p><p>3.2 AQURON® 1000™ CURING AND CONCRETE TREATMENT Once power trowelling has been completed to produce a dense, burnished finish, apply AQURON®1000™, spray applied to the surface. Leave AQURON®1000™ between 7- 28 days to cure before commencing diamond grinding and honing techniques.</p><p>3.3</p><p>4. SELECTIONS For further details on selections go to www.aquron.co.nz or www.aquron.com.au Substitutions are not permitted to the following, unless stated otherwise.</p><p>4.1 CURING AND CONCRETE TREATMENT Location: ~ Product: AQURON®1000™</p><p>201310 – Web Version – AQURON 1000 for New Concrete 3123A Page 2</p>