<p> Everlastic® EVA-200G</p><p>Description Cross Linked, Closed Cell, Ethylene/Vinyl/Acetate Foam</p><p>Features Lightweight, Flexible, Resilient, Non-Absorbent Foam. Resistant to heat, ultraviolet and many chemicals.</p><p>Uses As hot or cold applied sealant backup, to fill vertical and horizontal joints, acoustical partition closures, corrugated deck closures and many other uses</p><p>Typical Physical Properties</p><p>Property Typical Value Test Method Color (Standard) Gray Density (lbs./cu.ft.) 2.3 ± 0.5 ASTM D 3575-91 Compression/Deflection (psi required to compress 25%) 5 ± 2 ASTM D 1056-91 Compression and Recovery @ 50% 14.5 psi ASTM D 1752-84 (10 psi Min. to 25 psi Max.) Modified 99% (see note 1) Extrusion @ 50% 0.10 inch (see note 2) Ultimate Tensile Strength 50 psi ASTM D 3575-91 Water Absorption <5%(Max. Gain by Weight) ASTM D1056-91 Odor No Objectionable Odor K Factor 0.25 Service Temperature ASTM D 746 Low -70°F High Continuous 160°F High Intermittent 180°F Flame Resistance Pass MVSS-302 Accelerated Aging 7 Day 158°F Flexibility180° Bend Without Cracking Pass Appearance Change None Change in Compression/Deflection ±30 1.) *After removal of load, material shall recover to 95% of original thickness within 24 hours* 2.) *When compressed to 50% of material thickness with three sides restrained, the unrestrained edge shall not extrude more than 0.25 inches.* Generally Resistant to, Acids, Alkalis, Gasoline & Oil, Aromatic Hydrocarbons, Ketones, Oxidation and Ozone</p><p>Pg. 1 of 1</p>