<p>Detailed procedure for the microwaves Reactor to treat a samples odf Dioxane water HCL at 80 degrees. </p><p>*Who will run the microwave needs to make four treatments:</p><p>*First you have to turn on the microwave, check the welcome message if there is any errors were happened, check the water cycle.</p><p>*second select if you want to run it manually or automatically, in this case automatic is better so u will control all conditions by using the three keys in the left .</p><p>*the first key will help you to choose the number of the flask form 1 to 16* the second key will help you to choose the treatment number from 1 to 16</p><p>*the third is to a make sequence changes in the microwave power and the time and the cooling or waiting time.</p><p>* And you will use the system key to choose which flask you will begin with.</p><p>*so if you will do one acidolysis process chooses one number( e. g. 1)</p><p>*after that press the first key choose number one</p><p>* press the 2nd choose the first treatment:</p><p>*press the third key: under this, u will make a sequence as shown:</p><p>P0=10 T0=3 P1= 1 T1=7</p><p>P2=5 T2=3 P3=1 T3=7</p><p>W= 7 </p><p>*press the second key again chooses treatment number 2</p><p>*press the third one and do: P0=10 T0=3 P1=1 T1=8 </p><p>P2=5 T2=3 P3=1 T3=8</p><p>W=7</p><p>*press the 2 nd key and choose the third treatment</p><p>*press the third and do so:</p><p>P0=10 T0=2 P1=1 T1=7</p><p>P2=5 T2=3 P3=1 T3=7</p><p>W= 8.3(500 sec)</p><p>*press the 2nd key and choose the forth treatment</p><p>*press the third and do so;</p><p>P0= 10 T0=3 P1=1 T1=7</p><p>P2=5 T2=3 P3=1 T3=7</p><p>W=00</p><p>*P= microwave power percent, T= time in minute, W= waiting time</p><p>1. The mixture composition that you are heating 2 g OD crude lignin, in 60mL aqueous doixane 2. The volume of the material you are heating and the size of the reaction flask , the big one of the device, 100 mL 3. A Scanned PDF version photocopy of the diagram of the keys (from the manual of the machine) indicating the location of the various keys you are referring to in this procedure.</p>