<p> A&E SPECIFICATIONS</p><p>OPENEYE CM-814 IP PTZ CAMERA</p><p>1. SUMMARY</p><p>1.01 Camera 1. The OpenEye CM-814 IP PTZ camera shall be an indoor and outdoor camera with an IP66 rated housing to protect against weather. The CM-814 shall have an integrated heater for extreme temperatures as low as -49°F (-45°C). The CM-814 shall come equipped with an IR cut filter for day and night video, and a wide dynamic range (WDR) function for enhanced viewing of high contrast lighting situations.</p><p>1.02 Transmission 1. The CM-814 IP camera shall be capable of dual streaming, using MJPEG and H.264 compression methods.</p><p>2. SPECIFICATIONS</p><p>2.01 SPECIFICATIONS 1. The CM-814 IP camera shall have a ¼” Sony CCD image sensor. 2. The CM-814 IP camera shall have a Sony Effio Digital Signal Processor (DSP). 3. The CM-814 IP camera shall have an ingress protection (IP) rating equivalent to IP66 against the ingress of dust and moisture. 4. The CM-814 IP camera shall have wide dynamic range (WDR) function for situations with a wide variety of lighting conditions. 5. The CM-814 IP camera shall operate with a minimum illumination of 0.1 lux @ F1.2 in day mode and 0.01 lux @ F1.2 in night mode. 6. The CM-814 IP camera shall have a mechanical IR cut filter that is removed during low light conditions. This shall be referred to as a “True Day/Night” function. 7. The CM-814 IP camera shall have an analog video output. The video output shall use a BNC connector and output a 1.0V (peak to peak) video signal that meets CVBS standards. 8. The CM-814 IP camera’s analog output shall have a 650TVL resolution. 9. The CM-814 IP camera shall have a signal to noise ratio of 50 decibels (dB) or greater. 10. The CM-814 IP camera shall have a vari-focal lens with a length of 3.4mm to 122.4mm for a total optical zoom of 36x. 11. The CM-814 IP camera shall have an auto/manual iris control that is adjustable through the camera’s web interface. 12. The CM-814 IP camera shall have a white balance function that is adjustable through the camera’s web interface. 13. The CM-814 IP camera shall have an auto white balance range from 2,000 Kelvin to 10,000 Kelvin. 14. The CM-814 IP camera shall have a backlight compensation feature that is adjustable through the camera’s web interface.</p><p>1 | 23221 E. Knox Ave. Liberty Lake, WA 99019 | Phone: 509.777.6702 30275 Rev AB 15. The CM-814 IP camera shall have an auto gain control feature that is adjustable through the camera’s web interface. 16. The CM-814 IP camera shall have four sensor inputs and one relay output.</p><p>2.02 PTZ 1. The CM-814 PTZ camera shall have an optical zoom equal to 36x. 2. The CM-814 PTZ camera shall have a Pan range that is an endless 360 degrees. 3. The CM-814 PTZ camera shall have a tilt rage of -10° to 190°. 4. The CM-814 PTZ camera shall support up to 256 preset positions. 5. The preset accuracy shall be within no less than ±0.225°. 6. The CM-814 PTZ camera shall have a programmable move speed that shall be 5° per second minimum and 400° per second maximum. 7. The CM-814 PTZ camera shall be capable of storing and recalling 8 pattern (mimic) tours. 8. The CM-814 PTZ camera shall be capable of storing and recalling 8 Tours consisting of stored preset positions. 9. The CM-814 PTZ camera shall be capable of storing and recalling 4 “Auto-scan” tours, consisting of two preset positions that the camera shall scan between. 10. The CM-814 PTZ camera shall support 16 “Privacy Mask” areas. 11. The CM-814 PTZ camera shall support 16 Zone Titles with a maximum of 20 characters for each title. Each view area’s title can be named with a privacy mask ID number for future reference. 12. The CM-814 PTZ camera shall have a home setting that the camera shall return to after a user defined amount of time that shall be a minimum of 1 minute and a maximum of 128 minutes. When the auto-home setting is activated, it shall call a Preset Tour, a Pattern Tour, an Autoscan Tour, or a Preset position. 13. The CM-814 PTZ camera shall have a picture function that shall include an image flip function that can be turned on and off through the camera’s web interface.</p><p>2.03 NETWORK 1. The CM-814 IP camera shall be capable of encoding video for network transmission across a LAN or WAN. 2. The CM-814 IP camera shall be capable of encoding video using H.264 and MJPEG compression methods. 3. The CM-814 IP Camera shall be Compliant with the ONVIF® standard for Network Video Transmitters. 4. The CM-814 IP camera shall be capable of dual streaming, or delivering two separately configured video streams at the same time. 5. The CM-814 IP camera shall have a maximum resolution of 720 x 480, equivalent to D1 resolution. 6. The CM-814 IP camera shall have an audio input, and be capable of transmitting audio data with the video stream. 7. The CM-814 IP camera shall have an audio output, and shall be capable of receiving audio through the web interface and playing it through the audio output. 8. The CM-814 IP camera shall have user authentication for secure video transmission, and shall be capable of up to 20 user accounts.</p><p>2 | 23221 E. Knox Ave. Liberty Lake, WA 99019 | Phone: 509.777.6702 30275 Rev AB 2.04 MECHANICAL 1. The CM-814 IP camera shall include a heater and fan by default for outdoor installations. When using the heater the camera requires 24vAC power input. 2. The CM-814 IP camera shall weigh 5.7 pounds, or 2.6 kg. 3. The CM-814 IP camera shall be 7.4 inches across and 11.9 inches high.</p><p>2.05 ELECTRICAL 1. The CM-814 IP camera shall operate using a 24vAC power source. 2. The CM-814 IP camera shall use 65 watts max when using the heater and fan. 3. The CM-814 IP camera’s rated amperage shall be 2.7A.</p><p>2.06 ENVIRONMENTAL 1. The CM-814 IP camera shall have an operational temperature of -49°F ~ 122°F (-45°C ~ 50°C).</p><p>3. SUPPORT</p><p>3.01 SUPPORT 1. The CM-814 IP camera shall come with an extensive support structure, including a 1-888 number for technical service, pre and post sales assistance, direct points of contact, and access to online sales and technical support.</p><p>2. Technical Support shall be available 24 hours per day, seven days per week to all integrators and dealers free of charge.</p><p>3.02 WARRANTY 1. The CM-814 IP camera shall come with a 2 year warranty with the first year including advance replacement service.</p><p>4. SUPPORTED MODELS</p><p>4.01 LIST OF SUPPORTED CAMERAS 1. The CM-814 Cameras shall be one of the following models. 2. This document applies to the following models only.</p><p>CM-814 Outdoor IP PTZ Camera</p><p>4.02 LIST OF SUPPORTED ACCESSORIES 1. The following list of accessories is compatible with the OpenEye CM-814 cameras: CA-510WL Long Wall Mount Bracket CA-510W Wall mount bracket CA-510C Corner Mounting Plate CA-510P25 25cm Pole Adapter CA-510P50 50cm Pole Adapter CA-510PML Large Pole Mount CA-510PA25 1 ¼” Threaded Adapter</p><p>3 | 23221 E. Knox Ave. Liberty Lake, WA 99019 | Phone: 509.777.6702 30275 Rev AB CA-510PA50 1 ½” Threaded Adapter</p><p>4 | 23221 E. Knox Ave. Liberty Lake, WA 99019 | Phone: 509.777.6702 30275 Rev AB</p>